oweals/u-boot.git
2019-10-08 Lukasz Majewskidts: imx28: Remove #include "imx28.dtsi" from imx28...
2019-10-08 Lukasz Majewskiimx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC...
2019-10-08 Lukasz Majewskiimx: Rewrite display5 get_board_id() function to use...
2019-10-08 Lukasz Majewskiimx: Convert emergency pad of display5 to use dm_gpio...
2019-10-08 Lukasz MajewskiARM: Update display5_factory_defconfig after switch...
2019-10-08 Lukasz MajewskiARM: display5: Remove common.c file (after DM/DTS U...
2019-10-08 Lukasz MajewskiDM: WDT: Convert WDT driver to use DM/DTS (including...
2019-10-08 Lukasz MajewskiARM: display5: Remove UART initialization code after...
2019-10-08 Lukasz MajewskiDM: SPI: Convert display5 to use SPI with DM/DTS (but...
2019-10-08 Lukasz MajewskiDM: eth: Switch display5 board to use DM_ETH
2019-10-08 Lukasz MajewskiDM: mmc: Switch display5 board to use DM_MMC and BLK...
2019-10-08 Lukasz MajewskiARM: imx: defconfig: Enable 'regulator' and 'pmic'...
2019-10-08 Lukasz MajewskiDM: I2C: Switch display5 board to use DM_I2C
2019-10-08 Lukasz MajewskiARM: imx: defconfig: Enable CONFIG_PINCTRL{_IMX6} on...
2019-10-08 Lukasz Majewskifix: defconfig: Enable OF_CONTROL for display5_factory
2019-10-08 Lukasz Majewskiimx: bk4: Print proper HW revision of VF610's BK4 board
2019-10-08 Fabio Estevampico-imx6: Add Falcon mode
2019-10-08 Fabio Estevampico-imx6: Add splashscreen support
2019-10-08 Fabio Estevampico-imx6: Add Ethernet support
2019-10-08 Otavio Salvadorpico-imx6: Fix bootmenu handling
2019-10-08 Fabio Estevampico-imx6: Add initial support
2019-10-08 Fabio Estevammx6: clock: Allow enable_ipu_clock() to be built for...
2019-10-08 Fabio Estevammx53loco: Fix U-Boot corruption after saving the enviro...
2019-10-08 Stefano Babicboard: imx6dl_mamoj: set the value for CSF size
2019-10-08 Otavio Salvadorconfigs: Sync all baseboard specific pico-imx7d
2019-10-08 Joris Offougaconfigs: pico-imx7d: Convert to DM_VIDEO
2019-10-08 Joris OffougaARM: dts: pico-imx7d: sync device tree with v5.3-rc6
2019-10-08 Joris OffougaARM: dts: pico-imx7d: Add u-boot.dtsi for uboot specifi...
2019-10-08 Stefano Babicimx: fix missing MAINTAINERS pico boards
2019-10-08 Anatolij Gustschinimx: sksimx6_defconfig: remove SPL misc option to fix...
2019-10-08 Fabio Estevampico: Convert to CONFIG_FSL_USDHC
2019-10-08 Fabio Estevamlogos: Add the TechNexion's logo
2019-10-08 Fabio Estevampico-imx7d: Provide a way to escape the Falcon mode
2019-10-08 Fabio Estevampico-imx7d: Add instructions for booting in Falcon...
2019-10-08 Otavio Salvadorpico-imx7d: Add NYMPH baseboard support
2019-10-08 Otavio Salvadorpico-imx7d: Add DWARF baseboard support
2019-10-08 Fabio Bertonpico-imx7d: Sync pico-hobbit-imx7d_defconfig
2019-10-08 Fabio Estevampico-imx6ul: Provide a way to escape the Falcon mode
2019-10-08 Fabio Estevampico-imx6ul: Update the Falcon mode instructions
2019-10-08 Fabio Estevampico-imx6ul: Add LCD support
2019-10-08 Fabio Estevampico-imx6ul: Increase the CONFIG_ENV_OFFSET size
2019-10-08 Otavio Salvadorpico-imx6ul: Add DWARF baseboard support
2019-10-08 Stefano BabicRevert "habv4: tools: Avoid hardcoded CSF size for...
2019-10-08 Breno Matheus... habv4: tools: Avoid hardcoded CSF size for SPL targets
2019-10-08 Peng Fanimx8: cpu: fix mac fuse word for i.MX8QM
2019-10-08 Peng Fanimx8: move i.MX8 cpu desc code to drivers/cpu/imx8_cpu.c
2019-10-08 Peng Fanimx: scu_api: add sc_pm_is_partition_started
2019-10-08 Peng Fanimx8: fdt: add optee node
2019-10-08 Peng Fanimx8: save args passed from ATF
2019-10-08 Peng Fanimx8: fdt: configure sid for masters
2019-10-08 Peng Fanimx: scu_api: add sc_rm_set_master_sid
2019-10-08 Peng Fanconfigs: imx8qm/qxp_mek: enable CONFIG_OF_SYSTEM_SETUP
2019-10-08 Peng Fanimx8: disable node when the resource is not owned
2019-10-08 Peng Fanimx8qm: correct fdt_file
2019-10-08 Peng Fanimx8qm: power up SMMU
2019-10-08 Peng Fanimx: sys_proto: add is_imx8qm helper
2019-10-08 Ye Liimx8: Probe the SCU driver by using uclass function
2019-10-08 Peng Fandoc: imx: mkimage: introduce i.MX8 image format
2019-10-08 Peng Fanimx8qm_mek: switch to use container image
2019-10-08 Peng Fanimx8qxp_mek: switch to use container image
2019-10-08 Peng Fanimx: add container target
2019-10-08 Peng Fanspl: mmc: support loading i.MX container format file
2019-10-08 Peng Fanimx8: support parsing i.MX8 Container file
2019-10-08 Peng Fanimx: imx8qxp_mek: fix CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_...
2019-10-08 Peng Fanimx: imx6qdl: dtsi: move U-Boot specific change to...
2019-10-08 Peng Fanimx: mx6sabresd: fix usb start when DM enabled
2019-10-08 Breno Matheus... imx: configs: Cleanup CONFIG_SECURE_BOOT comments
2019-10-08 Breno Matheus... imx6: spl: Reduce SPL limit size in case CONFIG_SECURE_...
2019-10-08 Breno Matheus... Kconfig: Migrate CONFIG_CSF_SIZE to Kconfig
2019-10-08 Fabio Estevammx6sabresd: Reduce overall SPL size
2019-10-08 Ye Lii.MX7ULP: Change clock rate calculation for NIC1 BUS...
2019-10-08 Ye Lii.MX7ULP: Set A7 core frequency to 500Mhz for B0 chip
2019-10-08 Peng Fani.MX7ULP: Add CPU revision check for B0
2019-10-08 Ye Lii.MX7ULP: Workaround APLL PFD2 to 345.6Mhz
2019-10-08 Ye Lii.MX7ULP: Fix SPLL/APLL clock rate calculation issue
2019-10-08 Peng Fani.MX7ULP: evk: Enable fuse comamnd
2019-10-08 Peng Fanmisc: Kconfig: make i.MX7ULP could use MXC_OCOTP
2019-10-08 Ye Lii.MX7ULP: Fix wrong i2c configuration name
2019-10-08 Ye Lii.MX7ULP: Add CONFIG_MX7ULP to kconfig
2019-10-08 Ye Lii.MX7ULP: Fix PCC register bits mask and offset issue
2019-10-08 Bai Pingi.MX7ULP: Correct the clock index
2019-10-08 Bai Pingi.MX7ULP: Fix system reset after a7 rtc alarm expired.
2019-10-08 Peng Fani.MX7ULP: evk: Modify FDT file to disable SD3.0 for...
2019-10-08 Peng Fanimx: i.MX7ULP: add get_boot_device
2019-10-08 Troy Kiskyconfigs: nitrogen6x: Add DM_SPI/DM_SPI_FLASH support
2019-10-08 Troy Kiskyconfigs: nitrogen6x: Add DM_GPIO support
2019-10-08 Troy Kiskynitrogen6x: reserve used gpios
2019-10-08 Troy Kiskyconfigs: nitrogen6x: Add DM_MMC/DM_USB/AHCI support
2019-10-08 Troy Kiskynitrogen6x: migrate to using device tree
2019-10-08 Robert HancockARM: imx: Support larger SPL size on IMX6DQ
2019-10-08 Ricardo Salvetispl: imx: only use HAB if spl fit signature is not...
2019-10-08 Ricardo Salvetiimx: apalis_imx6: select MX6Q via Kconfig
2019-10-08 Ricardo Salvetiapalis_imx6: fix broken fsl_esdhc_imx conversion
2019-10-08 Ricardo Salvetiapalis_imx6: add board_fit_config_name_match to support...
2019-10-08 Peng Fanarm: dts: imx: fsl-imx8qm.dtsi: add gpio aliases to...
2019-10-08 Peng Fanspl: pass args to board_return_to_bootrom
2019-10-08 Peng Fanserial: Kconfig: make MXC_UART usable for MX7 and IMX8M
2019-10-08 Peng Fantools: imx8mimage: fix HDMI/FIT parsing
2019-10-08 Peng Fanpinctrl: imx: use devfdt_get_addr_size_index
2019-10-08 Peng Fanimx: mx6slevk: enable DM_SPI and DM_SPI_FLASH
next