oweals/u-boot.git
2020-05-14 Patrick Delaunayusb: gadget: g_dnl: add function g_dnl_set_product
2020-05-14 Patrick Delaunaydoc: stm32mp1: update DFU support example
2020-05-14 Patrick Delaunayboard: stm32mp1: adapt MTD partition for BOOT from...
2020-05-14 Patrick Delaunayboard: stm32mp1: support boot from spi-nand
2020-05-14 Patrick Delaunayconfigs: stm32mp1: remove optee defconfig
2020-05-14 Patrick Delaunayboard: stm32mp1: use FDT address provided by TF-A at...
2020-05-14 Patrick Delaunaystm32mp1: dynamically detect op-tee presence
2020-05-14 Patrick Delaunayboard: stm32mp1: reserve memory for OP-TEE in device...
2020-05-14 Patrick Delaunaystm32mp1: move MTDPART configuration in Kconfig
2020-05-14 Patrick Delaunaystm32mp1: dynamically build DFU_ALT_INFO
2020-05-14 Patrick Delaunayboard: stm32mp1: move set_dfu_alt_info in st common...
2020-05-14 Patrick Delaunayboard: stm32mp1: move board_get_mtdparts in st common...
2020-05-14 Marek VasutARM: stm32: Implement DDR3 coding on DHCOR SoM
2020-05-14 Marek VasutARM: dts: stm32: Rework DDR DT inclusion
2020-05-14 Marek Vasutram: stm32mp1: Add support for multiple configs
2020-05-14 Marek VasutARM: stm32: Implement board coding on AV96
2020-05-14 Marek VasutARM: stm32: Add board_early_init_f() to SPL
2020-05-14 Marek VasutARM: stm32: Add default config for DHCOR
2020-05-12 Tom RiniMerge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
2020-05-12 Tom RiniMerge tag 'u-boot-amlogic-20200511' of https://gitlab...
2020-05-12 Siva Durga... usb: dwc3: Add versal compatibility string to dwc3...
2020-05-12 Jagan Tekiusb: dwc3: add dis_del_phy_power_chg_quirk
2020-05-11 Tom RiniPrepare v2020.07-rc2 v2020.07-rc2
2020-05-11 Tom RiniMerge tag 'efi-2020-07-rc2-4' of https://gitlab.denx...
2020-05-11 Tom RiniMerge tag 'ti-v2020.07-rc2' of https://gitlab.denx...
2020-05-11 Tom RiniMerge tag 'u-boot-imx-20200511' of https://gitlab.denx...
2020-05-11 Neil Armstrongtest: dm: update test for open-drain/open-source emulat...
2020-05-11 Neil Armstronggpio: emulate open drain & open source in dm_gpio_set_v...
2020-05-11 Tom RiniMerge branch 'master' of https://gitlab.denx.de/u-boot...
2020-05-11 Beniamino Galvaniodroid-c2: enable USB host controller
2020-05-11 Pali RohárNokia RX-51: Update README.nokia_rx51
2020-05-11 Pali RohárNokia RX-51: Disable some unused features to decrease...
2020-05-11 Pali RohárNokia RX-51: Enable CONFIG_CONSOLE_MUX
2020-05-11 Pali RohárNokia RX-51: Remember setup_console_atag option
2020-05-11 Pali RohárNokia RX-51: Remove PART* macros
2020-05-11 Pali RohárNokia RX-51: Revert back onenand defitions
2020-05-11 Pali RohárNokia RX-51: Move code from defconfig back to C header...
2020-05-11 Pali RohárNokia RX-51: Move comment about CONFIG_SYS_TEXT_BASE...
2020-05-11 Pali RohárNokia RX-51: Add README.nokia_rx51 file to MAINTAINERS
2020-05-11 Pali RohárNokia RX-51: Update my email address
2020-05-11 Dario Binacchivideo: omap: change include order
2020-05-11 Andrew F. Davisarm: K3: Increase default SYSFW image size allocation
2020-05-10 Ye Lisf: Add Macronix MX25R6435F SPI NOR flash to flash...
2020-05-10 Dario Binacchispi: fix dev parameter in dev_* calls
2020-05-10 Kuldeep Singhspi: nxp-fspi: Use new readl_poll_sleep_timeout API
2020-05-10 Jagan Tekiiopoll: Add readl_poll_sleep_timeout
2020-05-10 Jagan Tekiiopoll: Add dealy to read poll
2020-05-10 Jagan Tekiiopoll: Add read_poll_timeout common API
2020-05-10 Jagan Tekiclk: Fix clk func names in comments
2020-05-10 Jagan Tekiphy: Use _nodev naming convention if non-device clients
2020-05-10 Jagan Tekiphy: Fix node description of phy_get_by_node
2020-05-10 Jagan Tekispi: Zap lpc32xx_ssp driver-related code
2020-05-10 Peng Fanimx8: cpu: check resource owned after sid fail
2020-05-10 Peng Fanimx: imx8qxp: update fdt_file according to m4 state
2020-05-10 Peng Fanimx: imx8qm: update fdt_file according to m4 state
2020-05-10 Peng Fanimx: imx8qm/qxp: check whether m4 partition booted
2020-05-10 Ye Liimx8: Select boot device dynamically
2020-05-10 Peng Fanimx: imx8qm/qxp: Recover SPL data section for partition...
2020-05-10 Peng Fanimx: imx8qm/imx8qxp: Power down the resources before...
2020-05-10 Peng Fanimx: imx8qm/qxp: add get_board_serial
2020-05-10 Ye Liimx: imx8qm/qxp: Fix issue in get_effective_memsize
2020-05-10 Peng Fanimx: imx8qm/qxp: reserving DDR memory for M4
2020-05-10 Han Xumtd: nand: raw: mxs_nand changes for nandbcb
2020-05-10 Han Xunandbcb: read boot search count from fuse for imx8qxp
2020-05-10 Han Xucmd: nandbcb: Reconstruct the nandbcb tool for all...
2020-05-10 Alice Guonandbcb: add nandbcb dump command for i.MX6
2020-05-10 Alice Guonandbcb: add nandbcb dump command for i.MX8MM
2020-05-10 Alice Guonandbcb: support i.MX8M
2020-05-10 Han Xunandbcb: fix the issue cannot support gf_14 NAND boot
2020-05-10 Leonard Crestezimx8: Replace SC_R_LAST with SC_R_NONE in DTB
2020-05-10 Ye Lipower: imx8: Check owned resource in power on
2020-05-10 Peng Fanpower: imx8: remove the resource owned check before...
2020-05-10 Ye Lipower: imx8-power-domain: Set DM_FLAG_DEFAULT_PD_CTRL_O...
2020-05-10 Peng Fanimx8: power: Add PD device lookup interface to power...
2020-05-10 Peng Fandt-bindings: imx_rsrc: add SC_R_NONE
2020-05-10 Adam Fordimx: Add support for i.MX8MM Beacon EmbeddedWorks devkit.
2020-05-10 Alice Guonand: enable the Randomizer module for i.mx7 and i.mx8
2020-05-10 Han Xumxs_nand: don't check zero count when ECC reading with...
2020-05-10 Ye LiMXS_NAND: Add clock support for iMX8
2020-05-10 Peng Fanmtd: nand: support GPMI NAND driver for i.MX8
2020-05-10 Alice Guonand: mxs_nand: make imx8mm can use hardware BCH and...
2020-05-10 Han Xumtd: mxs_nand: fix the gf_13/14 definition issue
2020-05-10 Han Xumtd: nand: mxs_nand: add i.MX6QP compatible string
2020-05-10 Ye Limxs_nand: Update compatible string for i.MX6SX
2020-05-10 Ye Linand: Update SPL MXS NAND mini driver
2020-05-10 Ye Limxs_nand: Add support for i.MX8M
2020-05-10 Peng Fannand: mxs: correct bitflip for erased NAND page
2020-05-10 Peng Fannand: mxs: fix the bitflips for erased page when uncorr...
2020-05-10 Ye Limtd: gpmi: provide the option to use legacy bch geometry
2020-05-10 Ye Limtd: gpmi: change the BCH layout setting for large...
2020-05-10 Ye Limisc: scu: Increase the timeout for MU communication
2020-05-10 Ye Limisc: fuse: Update imx8 fuse driver for 8QM
2020-05-10 Peng Fanimx: cpu: support tmu
2020-05-10 Peng Fanimx: regs: add more fuse bank structure
2020-05-10 Ye Liimx8mp: Set default SNSR25C for TMU probe1
2020-05-10 Ye Liimx: load calibration parameters from fuse for i.MX8MP
2020-05-10 Ye Liimx: i.MX8MN: Enable loading TASR and TCALIV from fuse
2020-05-10 Ye Liimx8mm: Load fuse for TMU TCALIV and TASR
2020-05-10 Peng Fanthermal: imx_tmu: support i.MX8MP
2020-05-10 Peng Fanthermal: imx_tmu: Check the TEMP range for iMX8MM
next