oweals/u-boot.git
2012-10-30 Pali Rohárcfb_console: Add support for some ANSI terminal escape...
2012-10-30 Pali RohárAdd power bus message definitions in twl4030.h
2012-10-30 Pali Rohárarm bootm: Allow to pass board specified atags
2012-10-25 Andrew Bradfordam335x_evm: Enable use of UART{1,2,3,4,5}
2012-10-25 Andrew Bradfordserial: ns16550: Enable COM5 and COM6
2012-10-25 Andrew Bradfordam33xx: Enable UART{1,2,3,4,5} pin-mux
2012-10-25 Andrew Bradfordam33xx: Enable UART{1,2,3,4,5} clocks
2012-10-25 Peter Korsgaardam33xx/ddr_defs.h: rename DDR2/DDR3 defines to their...
2012-10-25 Peter Korsgaardam33xx: support board specific ddr settings
2012-10-25 Peter Korsgaardam33xx: move generic parts of pinmux handling out from...
2012-10-25 Peter Korsgaardam33xx/board: use cpu_mmc_init() for default mmc initia...
2012-10-25 Peter Korsgaardam33xx: move ti i2c baseboard header handling to board...
2012-10-25 Peter Korsgaardam33xx/board.c: make wdtimer/uart_base static
2012-10-25 Tom Riniam33xx: Add SPI SPL as an option
2012-10-25 Tom Riniomapimage: Add support for byteswapped SPI images
2012-10-25 Peter Korsgaardomap3_spi: introduce CONFIG_OMAP3_SPI_D0_D1_SWAPPED
2012-10-25 Stefano BabicOMAP3: add video support to the mcx board
2012-10-25 Stefano BabicVIDEO: add macro to set LCD size for DSS driver
2012-10-25 Stefano BabicOMAP3: mcx: updated to new hardware revision
2012-10-25 Stefano BabicOMAP3: updated pinmux and environment for new revision...
2012-10-25 Stefano BabicOMAP3: mt_ventoux: power on USB at startup
2012-10-25 Vaibhav Hirematham335x: Enable RTC 32K OSC clock
2012-10-23 Igor Grinbergcm-t35: clean unused defines from config
2012-10-23 Andrew Bradfordconfigs: Fix usage of mmc rescan
2012-10-23 Joel A Fernandesam33xx: Enable DDR3 for DDR3 version of beaglebone
2012-10-23 Pankaj BharadiyaUSB: musb_udc: Make musb_peri_rx_ep check for MUSB_RXCS...
2012-10-19 Simon Glassarm: fdt: Relocate fdt along with other data
2012-10-18 Tom Riniactux[123]: Update linker script for ELDK 4.2
2012-10-18 402jagan@gmail.comversatile: board configs: Use buffered writes on flash
2012-10-18 Marek Vasutdm: Move s3c24xx USB driver to a proper place
2012-10-18 Marek Vasutdm: wdt: arm: Move tnetv107x into drivers/watchdog/
2012-10-16 Albert ARIBAUDRemove lh7a40x cpu and serial driver
2012-10-16 Łukasz Dałekh2200: Add support for iPAQ h2200 palmtop
2012-10-15 Tom RiniMerge branch 'agust@denx.de-next' of git://git.denx...
2012-10-15 Joe Hershbergertools/env: Fix build failure from missing header include
2012-10-15 Marek Vasutkerneldoc: Add myself to the git-mailrc for kerneldoc
2012-10-15 Marek Vasutkerneldoc: Implement "Example" section handling
2012-10-15 Marek Vasutkerneldoc: Add nicer CSS stylesheet for HTML docs
2012-10-15 Marek Vasutkerneldoc: Implant DocBook from Linux kernel
2012-10-15 Fabio Estevamconfigs: mx6qsabre_common.h: Use default clock definitions
2012-10-15 Fabio Estevammx6qsabreauto: Add Ethernet support
2012-10-15 Benoît Thébaudeaumx25: Clean up lowlevel_init
2012-10-15 Benoît Thébaudeaumx31: Fix PDR0_CSI_PODF
2012-10-15 Benoît Thébaudeaumx35: Define MAX and AIPS registers
2012-10-15 Benoît Thébaudeaumx31: Add more CCM access macros
2012-10-15 Benoît Thébaudeaumx5: Optimize lowlevel_init code size
2012-10-15 Otavio Salvadormx6qsabreauto: Use ttymxc3 as console
2012-10-15 Benoît Thébaudeaumx25: Fix eSDHC support
2012-10-15 Benoît Thébaudeaumx25: Define cpu_eth_init() only if needed
2012-10-15 Benoît Thébaudeaumx25: Clean up clocks API
2012-10-15 Benoît Thébaudeaumx25 clocks: Fix MXC_FEC_CLK
2012-10-15 Benoît Thébaudeaumx25: Define more standard clocks
2012-10-15 Benoît Thébaudeaumx25: Clean up clock calculations
2012-10-15 Benoît Thébaudeaumx25: Fix decode_pll
2012-10-15 Benoît Thébaudeaumx5/6 clocks: Fix SDHC clocks
2012-10-15 Benoît Thébaudeaumx51: Fix I2C clock ID check
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix MXC_FEC_CLK
2012-10-15 Benoît Thébaudeaumx5 clocks: Simplify imx_get_cspiclk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_uart_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_ipg_per_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_periph_clk()
2012-10-15 Benoît Thébaudeaumx5 clocks: Fix get_lp_apm()
2012-10-15 Benoît Thébaudeaumx5 clocks: Add and use CCSR definitions
2012-10-15 Benoît Thébaudeaumx51: Fix USB PHY clocks
2012-10-15 Benoît Thébaudeaumx5: Fix clock gate values
2012-10-15 Benoît Thébaudeaumx5: Use explicit clock gate names
2012-10-15 Benoît Thébaudeaumx5 clocks: Cleanup
2012-10-15 Benoît Thébaudeaumx5/6: Define default SoC input clock frequencies
2012-10-15 Matthias Weisserimx: Use MXC_I2C_CLK in imx i2c driver
2012-10-15 Eric Benardmx25: add CPU revision 1.2
2012-10-15 Fabio Estevammx6q: Add basic support for mx6qsabreauto
2012-10-15 Fabio Estevamconfigs: mx6: Add a common config file
2012-10-15 Eric Nelsoni.MX6: get rid of redundant struct src_regs (dupe of...
2012-10-15 Eric Nelsoni.MX6: define struct iomuxc and IOMUX_GPR2 register...
2012-10-15 Eric Nelsoni.MX6: Add ANATOP_PFD_480 bitfield constants
2012-10-15 Eric Nelsoni.MX6: define IOMUX_GPR3 register bitfields
2012-10-15 Eric Nelsoni.MX6: define bitfields for CHSCCDR register
2012-10-15 Eric Nelsoni.MX6: change register name for CCM_CHSCCDR to match...
2012-10-15 Eric Nelsoni.MX6: provide functional names for CCM_CCGR0-CCGR6...
2012-10-15 Fabio Estevammx6qsabresd: Add 8-bit USDHC support
2012-10-15 Fabio Estevammx6qsabresd: Add Ethernet support
2012-10-15 Fabio Estevammx6: Add basic support for mx6qsabresd board.
2012-10-15 Fabio Estevammx6q: Factor out common DDR3 init code
2012-10-15 Lukasz Dalekpxa: Add code to examine cpu model and revision
2012-10-15 Lucas Stachtegra: nand: add board pinmux
2012-10-15 Lucas Stachtegra: clean up board include hell
2012-10-15 Lucas Stachtegra: add funcmux entry for NAND attached to KBC
2012-10-15 Lucas Stachtegra20: rework UART GPIO handling
2012-10-15 Lucas Stachtegra20: add clock_set_pllout function
2012-10-15 Lucas Stachtegra20: complete periph_id enum
2012-10-15 Stephen Warrentegra: enable CONFIG_CMD_PART
2012-10-15 Tom WarrenTegra20: Move some include files to arch-tegra for...
2012-10-15 Tom WarrenTegra20: Move some code files to common directories...
2012-10-15 Thierry Redingtegra: Rename Medcom to Medcom-Wide
2012-10-15 Thierry Redingtegra: Update Avionic Design vendor prefix
2012-10-15 Joe Hershbergertools: Add a README note about fw_printenv lock file
2012-10-15 Joe Hershbergerenv: Check for NULL pointer in envmatch()
2012-10-15 Joe Hershbergertools/env: Serialize calls to fw_*env
2012-10-15 Joe Hershbergertools/env: Don't call env_init() in fw_getenv()
2012-10-15 Joe Hershbergertools/env: Remove unneeded complexity
next