John Crispin [Tue, 9 Apr 2013 14:19:36 +0000 (14:19 +0000)]
move memory detect node to dtsi files
Signed-of-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36290
John Crispin [Tue, 9 Apr 2013 14:19:33 +0000 (14:19 +0000)]
Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
John Crispin [Tue, 9 Apr 2013 14:19:28 +0000 (14:19 +0000)]
remove bootargs from dts
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36288
John Crispin [Tue, 9 Apr 2013 14:19:24 +0000 (14:19 +0000)]
add ofpart info to the devicetrees
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36287
John Crispin [Tue, 9 Apr 2013 14:19:20 +0000 (14:19 +0000)]
add sample swconfig portmap
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36286
John Crispin [Tue, 9 Apr 2013 14:19:17 +0000 (14:19 +0000)]
set of_node before registring the switch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36285
John Crispin [Tue, 9 Apr 2013 14:19:13 +0000 (14:19 +0000)]
add portmap support to userland
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36284
John Crispin [Tue, 9 Apr 2013 14:19:09 +0000 (14:19 +0000)]
allow loading port maps from OF
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36283
John Crispin [Tue, 9 Apr 2013 14:19:05 +0000 (14:19 +0000)]
add "swconfig list" support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36282
Jo-Philipp Wich [Tue, 9 Apr 2013 12:21:12 +0000 (12:21 +0000)]
netifd: fix route / route6 regression (#13303)
SVN-Revision: 36281
Steven Barth [Tue, 9 Apr 2013 12:12:30 +0000 (12:12 +0000)]
Remove deprecated ip6slaac option * use proto=dhcpv6 with reqprefix=no instead
SVN-Revision: 36280
Steven Barth [Tue, 9 Apr 2013 09:45:51 +0000 (09:45 +0000)]
Remove obsoleted ipv6-support meta-package
SVN-Revision: 36279
Steven Barth [Tue, 9 Apr 2013 08:03:08 +0000 (08:03 +0000)]
Adapt default network configuration for IPv6
SVN-Revision: 36278
Steven Barth [Tue, 9 Apr 2013 08:02:55 +0000 (08:02 +0000)]
Enable native IPv6 support by default
SVN-Revision: 36277
Gabor Juhos [Mon, 8 Apr 2013 12:34:17 +0000 (12:34 +0000)]
ramips: TEW-691GR.dts fixes
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36276
Gabor Juhos [Mon, 8 Apr 2013 12:34:15 +0000 (12:34 +0000)]
ramips: rt3883: enable the AR8216 driver
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36275
Gabor Juhos [Mon, 8 Apr 2013 11:12:04 +0000 (11:12 +0000)]
ramips: add profile for the Omnima EMB-HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36274
Gabor Juhos [Mon, 8 Apr 2013 11:12:03 +0000 (11:12 +0000)]
ramips: OMNI-EMB-HPM.dts fixes
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36273
Gabor Juhos [Mon, 8 Apr 2013 11:12:02 +0000 (11:12 +0000)]
ramips: add mdio-bus node to rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36272
Gabor Juhos [Mon, 8 Apr 2013 11:12:01 +0000 (11:12 +0000)]
ramips: fix MDIO/PHY handling
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36271
Gabor Juhos [Mon, 8 Apr 2013 08:24:51 +0000 (08:24 +0000)]
ramips: fix console speed for OMNI-EMB-HPM
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36270
Gabor Juhos [Mon, 8 Apr 2013 08:24:50 +0000 (08:24 +0000)]
ramips: avoid invalid pointer dereference in pinmux code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36269
Gabor Juhos [Mon, 8 Apr 2013 07:11:35 +0000 (07:11 +0000)]
ramips: TEW-692GR.dts fixes
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36268
Felix Fietkau [Sun, 7 Apr 2013 22:05:45 +0000 (22:05 +0000)]
ath9k: fix a tx processing race condition on AR9300+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36267
Felix Fietkau [Sun, 7 Apr 2013 22:05:41 +0000 (22:05 +0000)]
ath9k_htc: accept firmware versions newer than 1.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36266
Felix Fietkau [Sun, 7 Apr 2013 22:05:36 +0000 (22:05 +0000)]
mac80211: merge an idle handling fix (fixes ath9k_htc client mode), refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36265
Gabor Juhos [Sun, 7 Apr 2013 20:56:22 +0000 (20:56 +0000)]
ramips: add PCI node into RTN56U.dts
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36264
Gabor Juhos [Sun, 7 Apr 2013 20:56:21 +0000 (20:56 +0000)]
ramips: add PCI node for rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36263
Gabor Juhos [Sun, 7 Apr 2013 20:56:20 +0000 (20:56 +0000)]
ramips: rt3883: enable PCI support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36262
Gabor Juhos [Sun, 7 Apr 2013 20:56:18 +0000 (20:56 +0000)]
ramips: fix RT3883 PCI driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36261
Gabor Juhos [Sun, 7 Apr 2013 17:05:05 +0000 (17:05 +0000)]
ramips: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36260
Gabor Juhos [Sun, 7 Apr 2013 17:05:04 +0000 (17:05 +0000)]
ramips: add missing cpu-feature-override.h files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36259
Gabor Juhos [Sun, 7 Apr 2013 16:26:27 +0000 (16:26 +0000)]
ramips: fix broken patch name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36258
Gabor Juhos [Sun, 7 Apr 2013 16:24:33 +0000 (16:24 +0000)]
ramips: fix polarity of GPIO buttons for RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36257
Gabor Juhos [Sun, 7 Apr 2013 15:53:17 +0000 (15:53 +0000)]
x86/generic: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36256
Gabor Juhos [Sun, 7 Apr 2013 15:53:15 +0000 (15:53 +0000)]
x86/generic: switch to 3.8
Only tested within a VM.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36255
Gabor Juhos [Sun, 7 Apr 2013 15:53:13 +0000 (15:53 +0000)]
x86/generic: add config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36254
Gabor Juhos [Sun, 7 Apr 2013 15:53:11 +0000 (15:53 +0000)]
x86/alix2: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36253
Gabor Juhos [Sun, 7 Apr 2013 15:53:09 +0000 (15:53 +0000)]
x86/alix2: switch to 3.8
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36252
Gabor Juhos [Sun, 7 Apr 2013 15:53:08 +0000 (15:53 +0000)]
x86/alix2: add config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36251
Gabor Juhos [Sun, 7 Apr 2013 15:53:05 +0000 (15:53 +0000)]
x86: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36250
Gabor Juhos [Sun, 7 Apr 2013 14:46:11 +0000 (14:46 +0000)]
ramips: add nor-flash node for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36249
Gabor Juhos [Sun, 7 Apr 2013 14:46:10 +0000 (14:46 +0000)]
ramips: fix pinmux settings for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36248
Gabor Juhos [Sun, 7 Apr 2013 14:46:09 +0000 (14:46 +0000)]
ramips: pinmux fixes
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36247
Gabor Juhos [Sun, 7 Apr 2013 13:32:37 +0000 (13:32 +0000)]
ramips: remove trailing whitespaces from dts files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36246
Gabor Juhos [Sun, 7 Apr 2013 13:25:38 +0000 (13:25 +0000)]
ramips: handle PCI interrupts in plat_irq_dispatch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36245
John Crispin [Sun, 7 Apr 2013 11:47:03 +0000 (11:47 +0000)]
fix typos inside dts files
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
SVN-Revision: 36244
John Crispin [Sun, 7 Apr 2013 11:46:54 +0000 (11:46 +0000)]
fix default commandline in dts files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36243
Gabor Juhos [Sun, 7 Apr 2013 11:37:15 +0000 (11:37 +0000)]
ramips: add cfi_cmdset_0002 patches
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36242
Felix Fietkau [Sun, 7 Apr 2013 11:24:30 +0000 (11:24 +0000)]
cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36241
Felix Fietkau [Sun, 7 Apr 2013 10:11:41 +0000 (10:11 +0000)]
gcc: remove the bogus CONFIG_TLS_SUPPORT symbol - TLS support is required by libc.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36240
Felix Fietkau [Sun, 7 Apr 2013 10:11:38 +0000 (10:11 +0000)]
uClibc: unbreak ld-uClibc on non-64bit platforms
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36239
Gabor Juhos [Sun, 7 Apr 2013 08:19:10 +0000 (08:19 +0000)]
ramips: remove top-level {address,size}-cells properties from .dts files
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36237
Hauke Mehrtens [Sat, 6 Apr 2013 22:22:26 +0000 (22:22 +0000)]
brcm47xx: use old partition names again for kernel 3.8
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
SVN-Revision: 36235
Hauke Mehrtens [Sat, 6 Apr 2013 19:02:25 +0000 (19:02 +0000)]
brcm47xx: fix error in board detection when nvram is not available.
SVN-Revision: 36234
Gabor Juhos [Sat, 6 Apr 2013 17:33:03 +0000 (17:33 +0000)]
linux/3.8: implement pcibios_get_phb_of_node for MIPS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36233
Gabor Juhos [Sat, 6 Apr 2013 17:33:00 +0000 (17:33 +0000)]
linux/3.8: backport devm_ioremap_resource from 3.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36232
Gabor Juhos [Sat, 6 Apr 2013 17:19:35 +0000 (17:19 +0000)]
ramips: fix ethernet switch node in DIR-645.dts
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36231
Gabor Juhos [Sat, 6 Apr 2013 17:19:31 +0000 (17:19 +0000)]
generic: rtl8367: add compatible string with vendor prefix
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36230
Gabor Juhos [Sat, 6 Apr 2013 17:03:09 +0000 (17:03 +0000)]
generic: rtl8367b: fix rtl8367b_extif_init_of
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36229
Gabor Juhos [Sat, 6 Apr 2013 16:56:47 +0000 (16:56 +0000)]
linux/3.8: add more missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36228
Gabor Juhos [Sat, 6 Apr 2013 16:55:25 +0000 (16:55 +0000)]
package/kernel: only include i2c-of if CONFIG_OF enabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36227
Gabor Juhos [Sat, 6 Apr 2013 16:38:36 +0000 (16:38 +0000)]
linux/3.8: add missing symbol
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36226
Gabor Juhos [Sat, 6 Apr 2013 13:11:44 +0000 (13:11 +0000)]
kernel: fix md5sum for 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36225
Gabor Juhos [Sat, 6 Apr 2013 12:41:06 +0000 (12:41 +0000)]
kernel: Allow talitos crypto hw module selection
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36224
Gabor Juhos [Sat, 6 Apr 2013 12:37:40 +0000 (12:37 +0000)]
ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36223
Gabor Juhos [Sat, 6 Apr 2013 12:37:38 +0000 (12:37 +0000)]
ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36222
Gabor Juhos [Sat, 6 Apr 2013 12:37:37 +0000 (12:37 +0000)]
ramips: rt3883: enable the RTL8367 driver
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36221
Gabor Juhos [Sat, 6 Apr 2013 12:37:36 +0000 (12:37 +0000)]
generic: rtl8367: allow to load extif config from OF
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36220
Gabor Juhos [Sat, 6 Apr 2013 12:37:34 +0000 (12:37 +0000)]
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36219
Gabor Juhos [Sat, 6 Apr 2013 12:37:32 +0000 (12:37 +0000)]
generic: rtl8367: add vendor prefix to the compatible string
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36218
Gabor Juhos [Sat, 6 Apr 2013 12:37:31 +0000 (12:37 +0000)]
ramips: rt3883: sync 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36217
John Crispin [Sat, 6 Apr 2013 11:46:34 +0000 (11:46 +0000)]
fix typo pinmmux -> pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36216
Gabor Juhos [Sat, 6 Apr 2013 11:40:44 +0000 (11:40 +0000)]
kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
Gabor Juhos [Sat, 6 Apr 2013 11:40:41 +0000 (11:40 +0000)]
refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36214
John Crispin [Fri, 5 Apr 2013 23:37:45 +0000 (23:37 +0000)]
fix dir-615 h1 network config
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
SVN-Revision: 36213
John Crispin [Fri, 5 Apr 2013 23:10:42 +0000 (23:10 +0000)]
fix typo that made gpiomuxing fail
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36212
Florian Fainelli [Fri, 5 Apr 2013 12:36:48 +0000 (12:36 +0000)]
malta: add le64 and be64 sub targets
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36211
Florian Fainelli [Fri, 5 Apr 2013 12:36:45 +0000 (12:36 +0000)]
malta: move 32-bits options to subtarget config
Preliminary change to add support for MIPS64-based malta subtargets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36210
Florian Fainelli [Fri, 5 Apr 2013 12:36:41 +0000 (12:36 +0000)]
malta: move endianness kernel configuration to subtarget
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36209
Florian Fainelli [Fri, 5 Apr 2013 12:36:37 +0000 (12:36 +0000)]
toolchain/uClibc: backport a MIPS64 fix from openadk
Fixes uClibc dynamic loader name requested by executables when
targetting MIPS64 n64
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36208
Florian Fainelli [Fri, 5 Apr 2013 12:36:31 +0000 (12:36 +0000)]
toolchain/uClibc: handle different MIPS64 ABIs
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36207
Florian Fainelli [Fri, 5 Apr 2013 12:36:26 +0000 (12:36 +0000)]
toolchain: musl is not available on MIPS64
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36206
Florian Fainelli [Fri, 5 Apr 2013 12:36:23 +0000 (12:36 +0000)]
toolchain: allow choosing the MIPS64 user-land ABI
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36205
Florian Fainelli [Fri, 5 Apr 2013 12:36:19 +0000 (12:36 +0000)]
buildroot: factor knowledge of a 64bits architecture
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36204
Florian Fainelli [Fri, 5 Apr 2013 12:36:16 +0000 (12:36 +0000)]
malta: enable mips16 feature flag
The malta platform supports mips16 advertise this feature flag.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36203
Florian Fainelli [Fri, 5 Apr 2013 12:36:12 +0000 (12:36 +0000)]
buildroot: allow enabling MIPS16 user-space build
Enabling MIPS16 is made conditional on advertising the "mips16" feature
for a specific target since it requires support from the CPU
(HAS_MIPS16) and the actual use of MIPS16 for building packages
(USE_MIPS16).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36202
Florian Fainelli [Fri, 5 Apr 2013 12:36:09 +0000 (12:36 +0000)]
openssl: Pass in any TARGET_ASFLAGS
Packages not picking up the regular TARGET_AS need their openwrt
Makefiles tweaked. For a basic build, that's just openssl.
This depends on patch 1/5.
Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36201
Florian Fainelli [Fri, 5 Apr 2013 12:36:06 +0000 (12:36 +0000)]
toolchain/gcc: .init and .fini need to pick one ISA
The .init and .fini sections are built by concatenating code
fragments. Putting mips16 code in the middle of a mips32 code block
doesn't work. Make gcc built the magic crt stuff in no-mips16 mode.
This is specific to 4.6-linaro but is probably portable to other gcc
flavors. Adding this to the t-libgcc-mips16 makefile fragment is a
hack not suitable for pushing upstream, but there is no mips/t-linux
or mips/t-uclibc and I am not going to touch gcc/configure for two
lines.
Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36200
Florian Fainelli [Fri, 5 Apr 2013 12:36:00 +0000 (12:36 +0000)]
toolchain/uClibc: Disable mips16 for uClibc for now
For now, build uclibc without -mips16. There's no mips16 syscall
support AFAIK and uclibc uses inline assembly syscalls a lot.
In addition, touching errno means touching a TLS model symbol, and
that's not supported in gcc 4.6.
The __set_errno macro can be put back to calling
errno_location(). This allows much of the library to be built in
mips16 mode. I don't understand the implications to the thread library
of doing this.
A list of "build as -mno-mips16" C source files can be placed in the
mips architecture-dependent build files. Maintaining the list would be
no fun.
Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36199
Florian Fainelli [Fri, 5 Apr 2013 12:35:56 +0000 (12:35 +0000)]
rules.mk: MIPS16 builds get a different toolchain
To be safe, build "m16" into the toolchain and target architecture the
same way mips32r2 does:
target-mips_r2_m16_uClibc-0.9.33.2
toolchain-mips_r2_m16_gcc-4.6-linaro_uClibc-0.9.33.2
Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36198
Florian Fainelli [Fri, 5 Apr 2013 12:35:53 +0000 (12:35 +0000)]
rules.mk: Create TARGET_ASFLAGS; force -mno-mips16
Create and use a TARGET_ASFLAGS, defaulting to TARGET_CFLAGS.
MIPS .S files reasonably assume they are not in mips16 mode. Because
"-mips16 -mno-mips16" results in -mno-mips16, I can append that to the
TARGET_ASFLAGS. This should be done with $(filter-out)?
Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36197
Steven Barth [Fri, 5 Apr 2013 12:28:06 +0000 (12:28 +0000)]
netifd: Bump to latest version * Fix a memory corruption when updating IPv6 prefixes * Fix route sorting order (nbd) * Add support for ip rules (jow) * Implement support for route / route6 table attribute (jow)
SVN-Revision: 36196
Felix Fietkau [Thu, 4 Apr 2013 20:04:52 +0000 (20:04 +0000)]
ubus: update to latest version, fixes a crash on reconnect
SVN-Revision: 36195
John Crispin [Thu, 4 Apr 2013 14:57:43 +0000 (14:57 +0000)]
add a helper that allows loading the eeprom from a MTD partition pointed to by a phandle
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36194
Steven Barth [Wed, 3 Apr 2013 17:08:21 +0000 (17:08 +0000)]
netifd: Rewrite IPv6 prefix assignment * Add ip6hint option to specify assigned subprefixes * Add preliminary support for RFC 6603 prefix exclusion
SVN-Revision: 36193
John Crispin [Wed, 3 Apr 2013 12:58:06 +0000 (12:58 +0000)]
unbreak i2c-mv64xxx dependencies
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36192
John Crispin [Wed, 3 Apr 2013 12:51:12 +0000 (12:51 +0000)]
fix borken of-i2c dependencies
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36191
Imre Kaloz [Wed, 3 Apr 2013 10:41:07 +0000 (10:41 +0000)]
remove the old (and nonworking) hack and identify our patched GCCs properly
SVN-Revision: 36189
John Crispin [Wed, 3 Apr 2013 10:01:10 +0000 (10:01 +0000)]
fix eglibc compile
add librt dependency/link flag to procd when using eglibc thanks to jow for the help
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 36188
projects / oweals / openwrt.git / log