oweals/openwrt.git
4 years agoppp: update to version 2.4.8.git-2020-03-21
Hans Dedecker [Sun, 5 Apr 2020 20:26:33 +0000 (22:26 +0200)]
ppp: update to version 2.4.8.git-2020-03-21

Use upstream latest git HEAD as it allows to remove the patches
700-radius-Prevent-buffer-overflow-in-rc_mksid,
701-pppd-Fix-bounds-check-in-EAP-code and
702-pppd-Ignore-received-EAP-messages-when-not-doing-EAP and
take in other fixes.

41a7323 pppd: Fixed spelling 'unkown' => 'unknown' (#141)
6b014be pppd: Print version information to stdout instead of stderr (#133)
cba2736 pppd: Add RFC1990 (Multilink) to the See Also section of the man page
f2f9554 pppd: Add mppe.h to the list of headers to install if MPPE is defined
ae54fcf pppd: Obfuscate password argument string
8d45443 pppd: Ignore received EAP messages when not doing EAP
8d7970b pppd: Fix bounds check in EAP code
858976b radius: Prevent buffer overflow in rc_mksid()

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
4 years agotools/cmake: update to 3.17.0
Rosen Penev [Sun, 5 Apr 2020 22:38:32 +0000 (15:38 -0700)]
tools/cmake: update to 3.17.0

Remove libressl patches; they are no longer needed as LibreSSl adde
support

Replace qt tests patch with one that disables all of them.

Refresh remaining one.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
4 years agoramips: harmonize Netgear R6120 DT LED node names
Alex Lewontin [Fri, 21 Feb 2020 20:57:44 +0000 (15:57 -0500)]
ramips: harmonize Netgear R6120 DT LED node names

This changes the node names for the LEDs in the Netgear R6120
device-tree file to provide consistency with other devices.

Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com>
[improve commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agokernel: netdev: add missing config for mlx5 driver
Tan Zien [Sun, 5 Apr 2020 03:15:44 +0000 (11:15 +0800)]
kernel: netdev: add missing config for mlx5 driver

The mlk5 kmod lacks all necessary build symbols
for kernel 4.14 (again).

Add missing symbols to avoid build failure on these targets.

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[rewrite commit message - reorder symbols]
Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agoath79: add support for TP-Link TL-MR3420 v3
Lim Guo Wei [Sat, 4 Apr 2020 19:52:26 +0000 (03:52 +0800)]
ath79: add support for TP-Link TL-MR3420 v3

This adds support for the TP-Link TL-MR3420 v3, a later revision of the
v2 with an external gpiochip similar to TP-Link Archer C7 v4.

Specifications:

SOC: Qualcomm Atheros QCA9531
CPU: 650MHz
Flash: 4 MiB
RAM: 32 MiB
WLAN: Qualcomm Atheros QCA9531 bgn 2T2R 2.4 GHz
Ethernet: 5 ports (100M)

Flashing instructions:

- Flash factory image from OEM WebUI:
  openwrt-ath79-tiny-tplink_tl-mr3420-v3-squashfs-factory.bin
- Sysupgrade from ath79 image:
  openwrt-ath79-tiny-tplink_tl-mr3420-v3-squashfs-sysupgrade.bin

Signed-off-by: Lim Guo Wei <limguowei@gmail.com>
[remove SUPPORTED devices, some typo adjustments, fix WAN MAC
address, fix sorting in 01_leds]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agodnsmasq: bump to 2.81rc5
Kevin Darbyshire-Bryant [Sun, 5 Apr 2020 16:22:20 +0000 (17:22 +0100)]
dnsmasq: bump to 2.81rc5

Bump to 2.81rc5 and re-work ipset-remove-old-kernel-support.

More runtime kernel version checking is done in 2.81rc5 in various parts
of the code, so expand the ipset patch' scope to inlude those new areas
and rename to something a bit more generic.:wq

Upstream changes from rc4

532246f Tweak to DNSSEC logging.
8caf3d7 Fix rare problem allocating frec for DNSSEC.
d162bee Allow overriding of ubus service name.
b43585c Fix nameserver list in auth mode.
3f60ecd Fixed resource leak on ubus_init failure.
0506a5e Handle old kernels that don't do NETLINK_NO_ENOBUFS.
e7ee1aa Extend stop-dns-rebind to reject IPv6 LL and ULA addresses. We also reject the loopback address if rebind-localhost-ok is NOT set.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agoipq806x: remove support for kernel 4.14
Adrian Schmutzler [Wed, 1 Apr 2020 19:54:58 +0000 (21:54 +0200)]
ipq806x: remove support for kernel 4.14

This target has been on kernel 4.19 for several months [1] and
already uses kernel 5.4 as testing kernel. Therefore, it should
not be necessary to keep support for kernel 4.14 as well.

[1] 2a82e0e1ca0f ("ipq806x: switch to 4.19 kernel version")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq8065/nbg6817]
4 years agoramips: add DTS triggers to USB LEDs for F9K1109v1
Kip Porterfield [Fri, 3 Apr 2020 21:59:23 +0000 (21:59 +0000)]
ramips: add DTS triggers to USB LEDs for F9K1109v1

Alter DTS for Belkin F9K1109v1 to trigger USB leds from the echi/ochi
ports.

Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com>
4 years agomediatek: set v5.4 as default
John Crispin [Sun, 5 Apr 2020 14:10:38 +0000 (16:10 +0200)]
mediatek: set v5.4 as default

Signed-off-by: John Crispin <john@phrozen.org>
4 years agomediatek: add hw flow table offloading
John Crispin [Fri, 3 Apr 2020 15:51:59 +0000 (17:51 +0200)]
mediatek: add hw flow table offloading

Signed-off-by: John Crispin <john@phrozen.org>
4 years agomediatek: add support for rtl8367c
John Crispin [Fri, 3 Apr 2020 15:42:44 +0000 (17:42 +0200)]
mediatek: add support for rtl8367c

Signed-off-by: John Crispin <john@phrozen.org>
4 years agomediatek: drop v4.14 support
John Crispin [Fri, 3 Apr 2020 09:54:12 +0000 (11:54 +0200)]
mediatek: drop v4.14 support

Signed-off-by: John Crispin <john@phrozen.org>
4 years agomediatek: more v5.4 fixes
John Crispin [Fri, 3 Apr 2020 09:52:35 +0000 (11:52 +0200)]
mediatek: more v5.4 fixes

These are all backports and/or on their way upstream.

Signed-off-by: John Crispin <john@phrozen.org>
4 years agomediatek: consolidate partition names and settings
John Crispin [Fri, 3 Apr 2020 09:49:42 +0000 (11:49 +0200)]
mediatek: consolidate partition names and settings

Signed-off-by: John Crispin <john@phrozen.org>
4 years agomediatek: fix elecom board name
John Crispin [Fri, 3 Apr 2020 09:18:26 +0000 (11:18 +0200)]
mediatek: fix elecom board name

menuconfig was showing the the company name twice.

Signed-off-by: John Crispin <john@phrozen.org>
4 years agogeneric: fix flow table hw offload
John Crispin [Mon, 6 Apr 2020 05:04:38 +0000 (07:04 +0200)]
generic: fix flow table hw offload

Make the driver work with recent upstream changes.

Signed-off-by: John Crispin <john@phrozen.org>
4 years agonetifd: fix 14_migrate-dhcp-release script
Peter Stadler [Fri, 27 Mar 2020 12:36:08 +0000 (13:36 +0100)]
netifd: fix 14_migrate-dhcp-release script

prepend 'uci' to 'commit network'

Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
4 years agoramips: fix path for dma-ralink and mtk-hsdma
Chuanhong Guo [Sun, 5 Apr 2020 07:52:49 +0000 (15:52 +0800)]
ramips: fix path for dma-ralink and mtk-hsdma

These two drivers were available in drivers/staging in 5.4.
Fix driver paths for them.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years agodropbear: backport add ip address to exit without auth messages
Kevin Darbyshire-Bryant [Mon, 30 Sep 2019 09:41:28 +0000 (10:41 +0100)]
dropbear: backport add ip address to exit without auth messages

201e359 Handle early exit when addrstring isn't set
fa4c464 Improve address logging on early exit messages (#83)

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agohostapd: Move hostapd variants to WirelessAPD menu
Kevin Darbyshire-Bryant [Sat, 4 Apr 2020 11:42:13 +0000 (12:42 +0100)]
hostapd: Move hostapd variants to WirelessAPD menu

It seemed very confusing when trying to select the different variants of
hostapd which are somewhat scattered about under the menu 'Network'.
Moving all hostapd variants under a common submenu helps avoid
confusion.

Inspired-by: Kevin Mahoney <kevin.mahoney@zenotec.net>
[Fixup badly formatted patch, change menu name]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agoumdns: update to the version 2020-04-05
Kevin Darbyshire-Bryant [Sun, 5 Apr 2020 08:14:43 +0000 (09:14 +0100)]
umdns: update to the version 2020-04-05

ab7a39a umdns: fix unused error
45c4953 dns: explicitly endian-convert all fields in header and question

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agoRevert "generic: 5.4: Add 4B_OPCODES flag to w25q256"
Chuanhong Guo [Sat, 4 Apr 2020 13:23:50 +0000 (21:23 +0800)]
Revert "generic: 5.4: Add 4B_OPCODES flag to w25q256"

This reverts commit d7f21940bcaf70ba404d354c7fa6519c1717d00a.

Winbond W25Q256FV and W25Q256JV both uses 0xef4019 as JEDEC ID,
but only the latter has proper 4B_OPCODES support.
W25Q256FV has all 4B read instructions but it lacks a 4B page program
instruction, causing the entire flash to be read-only.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years agokernel: Fix miss config and module for mlx driver
Tan Zien [Sat, 4 Apr 2020 04:02:40 +0000 (12:02 +0800)]
kernel: Fix miss config and module for mlx driver

Missing config symbols could lead to build failures on kernel
4.14/4.19.

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
[rephrase commit message - reorder symbols]
Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agoumdns: suppress address-of-packed-member warning
Kevin Darbyshire-Bryant [Sat, 4 Apr 2020 08:20:08 +0000 (09:20 +0100)]
umdns: suppress address-of-packed-member warning

gcc 8 & 9 appear to be more picky with regards access alignment to
packed structures, leading to this warning in dns.c:

dns.c:261:2: error: converting a packed ‘struct dns_question’ pointer
(alignment 1) to a ‘uint16_t’ {aka ‘short unsigned int’} pointer
(alignment 2) may result in an unaligned pointer value
[-Werror=address-of-packed-member]

261 |  uint16_t *swap = (uint16_t *) q;

Work around what I think is a false positive by turning the warning off.
Not ideal, but not quite as not ideal as build failure.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agotreewide: convert sed -r to posix -E
Kevin Darbyshire-Bryant [Thu, 2 Apr 2020 18:30:17 +0000 (19:30 +0100)]
treewide: convert sed -r to posix -E

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agoath79: improve mikrotik-caldata.sh
Thibaut VARÈNE [Wed, 18 Mar 2020 09:35:26 +0000 (10:35 +0100)]
ath79: improve mikrotik-caldata.sh

Reduce unnecessary flash wear and be tidy:
- Run the extraction only if necessary
- Extract temporary file to /tmp
- cleanup after execution

Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
4 years agokernel: rtl8367b: use id as a bit offset for BYPASS_LINE_RATE
INAGAKI Hiroshi [Mon, 30 Mar 2020 06:19:50 +0000 (15:19 +0900)]
kernel: rtl8367b: use id as a bit offset for BYPASS_LINE_RATE

In RTL8367B (RTL8367RB/RTL8367R-VB), the driver in GPL tars of the
devices with this switch directly uses the ID of external interface
as a bit offset.

We should use the same way.

ref (RTL8367B):
  - ASUS RT-N56U
  - TP-Link Archer C2 v1

ref (RTL8367):
  - TP-Link TL-WR2543ND v1

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
4 years agokernel: rtl8367b: fix DEBUG register address for extif2
INAGAKI Hiroshi [Sat, 28 Mar 2020 10:31:23 +0000 (19:31 +0900)]
kernel: rtl8367b: fix DEBUG register address for extif2

RTL8367B_CHIP_DEBUG1_REG (0x1304) is for external interface 1. For
external interface 2, use RTL8367B_CHIP_DEBUG2_REG (0x13e2) instead.

Fixes: 9801d61c4a ("kernel: rtl8367b: add configuration for extif2")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
4 years agoramips: mt7621: bringup dsa master on preinit
Chuanhong Guo [Sat, 4 Apr 2020 08:30:16 +0000 (16:30 +0800)]
ramips: mt7621: bringup dsa master on preinit

DSA requires master netdev to be up before any of its slave ports.
Bring it up during preinit so that the first lan port can be used
on failsafe.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years agoramips: mt7621: disable image for mikrotik_rbm11g
Chuanhong Guo [Sat, 4 Apr 2020 07:20:46 +0000 (15:20 +0800)]
ramips: mt7621: disable image for mikrotik_rbm11g

It's unknown which switch port is used on mikrotik_rbm11g.
Disable this image until someone with actual device fixes this problem.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years agoramips: remove set_preinit_iface script
Chuanhong Guo [Sat, 4 Apr 2020 04:44:28 +0000 (12:44 +0800)]
ramips: remove set_preinit_iface script

This script isn't suitable for mt7621 anymore due to switching to DSA
and it needs a different preinit script.
Generic preinit logic in package/base-files has the ability to parse
board.json and pick preinit iface accordingly. Just remove this script
instead of moving it into subtargets.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years agogeneric: mt7530: fix null pointer dereferencing in port5 setup
DENG Qingfang [Sat, 4 Apr 2020 04:10:32 +0000 (12:10 +0800)]
generic: mt7530: fix null pointer dereferencing in port5 setup

The 2nd gmac of mediatek soc ethernet may not be connected to a PHY
and a phy-handle isn't always available.
Unfortunately, mt7530 dsa driver assumes that the 2nd gmac is always
connected to switch port 5 and setup mt7530 according to phy address
of 2nd gmac node, causing null pointer dereferencing when phy-handle
isn't defined in dts.
This commit fix this setup code by checking return value of
of_parse_phandle before using it.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agogeneric: backport support for MT7530 DSA port mirroring
DENG Qingfang [Fri, 3 Apr 2020 14:57:15 +0000 (22:57 +0800)]
generic: backport support for MT7530 DSA port mirroring

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: correct MTC WR1201 LAN ports names
René van Dorst [Wed, 1 Apr 2020 08:01:20 +0000 (10:01 +0200)]
ramips: correct MTC WR1201 LAN ports names

LAN ports of MTC WR1201 are reversed, so correct their names

Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: add new NAND driver
DENG Qingfang [Wed, 1 Apr 2020 03:19:12 +0000 (11:19 +0800)]
ramips: mt7621: add new NAND driver

Add new NAND driver for MT7621

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: drop obsolete mx25l25635f dts hack
DENG Qingfang [Thu, 26 Mar 2020 15:14:05 +0000 (23:14 +0800)]
ramips: mt7621: drop obsolete mx25l25635f dts hack

5.4 kernel has fixed this issue, so the hack is no longer needed.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoRevert "ramips: mt7621: disable images for gehua_ghl-r-001"
DENG Qingfang [Wed, 1 Apr 2020 08:42:08 +0000 (16:42 +0800)]
Revert "ramips: mt7621: disable images for gehua_ghl-r-001"

This reverts commit 28080d54d217fb4ab112e079f69462fee695dbf8.
Support for MX25L25635F flash is fixed upstream

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: move swconfig to subtargets except for MT7621
DENG Qingfang [Thu, 26 Mar 2020 14:00:48 +0000 (22:00 +0800)]
ramips: move swconfig to subtargets except for MT7621

As MT7621 does not use swconfig anymore, move the package swconfig to
other subtargets.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: introduce 'soc_device' initialization
DENG Qingfang [Tue, 24 Mar 2020 12:09:10 +0000 (20:09 +0800)]
ramips: mt7621: introduce 'soc_device' initialization

mt7621 SoC has its own 'ralink_soc_info' structure with some
information about the soc itself. Pcie controller and pcie phy
drivers for this soc which are still in staging git tree make uses
of 'soc_device_attribute' looking for revision 'E2' in order to
know if reset lines are or not inverted. This way of doing things
seems to be necessary in order to make things clean and properly.
Hence, introduce this 'soc_device' to be able to properly use those
attributes in drivers. Also set 'data' pointer points to the struct
'ralink_soc_info' to be able to export also current soc information
using this mechanism.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: fix MikroTik 750Gr3 LAN ports names
DENG Qingfang [Thu, 19 Mar 2020 16:26:08 +0000 (00:26 +0800)]
ramips: fix MikroTik 750Gr3 LAN ports names

They are labeled as LAN2..LAN5 instead of LAN1..LAN4

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: use SoC I2C instead of bitbanged for Ubiquiti ER-X-SFP
DENG Qingfang [Thu, 19 Mar 2020 11:43:39 +0000 (19:43 +0800)]
ramips: use SoC I2C instead of bitbanged for Ubiquiti ER-X-SFP

The original idea of bitbanged I2C is to use i2c-gpio-custom
Since i2c-gpio-custom is no longer available on 5.4, use SoC I2C instead

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: fix Ubiquiti ER-X ports names and MAC addresses
DENG Qingfang [Thu, 19 Mar 2020 11:33:27 +0000 (19:33 +0800)]
ramips: mt7621: fix Ubiquiti ER-X ports names and MAC addresses

The name of each user port should be eth0..4, instead of lan1..4
and there is no WAN port. Rename them to match the official firmware.
To avoid conflict with the master port (gmac0), rename it to "dsa".

The official firmware assigns MAC address in this way:
eth0 = label mac
eth1 = label mac + 1
...
eth4 = label mac + 4

Since we have switched to DSA, it's possible to use different MAC for each port.

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: net-label support
DENG Qingfang [Tue, 10 Mar 2020 17:33:40 +0000 (01:33 +0800)]
ramips: mt7621: net-label support

Add support for renaming ethernet interfaces in DTS

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: switch kernel version to 5.4
DENG Qingfang [Sun, 1 Mar 2020 09:17:49 +0000 (17:17 +0800)]
ramips: mt7621: switch kernel version to 5.4

After all dts and config changes, 4.14 no longer works on mt7621.
Switch it to 5.4 directly.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: change default ramips_setup_interfaces configuration
DENG Qingfang [Wed, 18 Mar 2020 17:10:50 +0000 (01:10 +0800)]
ramips: mt7621: change default ramips_setup_interfaces configuration

Most of MT7621 boards have LAN1~4 and WAN, so make this as the default

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621 remove unused pinctrl groups in dts
DENG Qingfang [Sat, 4 Apr 2020 06:52:12 +0000 (14:52 +0800)]
ramips: mt7621 remove unused pinctrl groups in dts

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[split commit, remove leftover uart3->gpio setup]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years agoramips: mt7621: update dts/defconfig for DSA
DENG Qingfang [Wed, 18 Mar 2020 15:38:58 +0000 (23:38 +0800)]
ramips: mt7621: update dts/defconfig for DSA

update dts and network/LED configuration for DSA driver.
sysupgrade from images prior to this commit with config preserved
will cause broken ethernet setup.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Acked-by: Jo-Philipp Wich <jo@mein.io>
[split commit]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years agoramips: mt7621: backport GPIO driver fix
DENG Qingfang [Tue, 17 Mar 2020 12:54:34 +0000 (20:54 +0800)]
ramips: mt7621: backport GPIO driver fix

Backport 2 patches from linux-next to fix mt7621 GPIO driver

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: update PCIe node in dtsi
DENG Qingfang [Wed, 1 Apr 2020 15:14:33 +0000 (23:14 +0800)]
ramips: mt7621: update PCIe node in dtsi

Update PCIe node in dtsi to match the new driver

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: backport PCIe driver fixes from staging-test
DENG Qingfang [Wed, 11 Mar 2020 13:05:41 +0000 (21:05 +0800)]
ramips: mt7621: backport PCIe driver fixes from staging-test

Backport mt7621-pci/mt7621-pci-phy fixes from staging-test

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: update pinctrl nodes
DENG Qingfang [Fri, 13 Mar 2020 13:27:03 +0000 (21:27 +0800)]
ramips: mt7621: update pinctrl nodes

Upstream GPIO driver uses "groups" "function" properties

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: convert GPIO dts refs
DENG Qingfang [Tue, 3 Mar 2020 21:22:24 +0000 (05:22 +0800)]
ramips: mt7621: convert GPIO dts refs

The upstream driver does not use &gpio0..2 banks notation anymore,
so convert them to &gpio

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: replace gpio/eth nodes in mt7621.dtsi
DENG Qingfang [Sun, 1 Mar 2020 09:14:44 +0000 (17:14 +0800)]
ramips: mt7621: replace gpio/eth nodes in mt7621.dtsi

There's different gpio and ethernet drivers upstream for mt7621.
Update these two nodes to match upstream dt bindings.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mt7621: refresh kernel config
DENG Qingfang [Sun, 1 Mar 2020 09:11:06 +0000 (17:11 +0800)]
ramips: mt7621: refresh kernel config

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: refresh patches
DENG Qingfang [Sun, 1 Mar 2020 09:06:45 +0000 (17:06 +0800)]
ramips: refresh patches

Removed upstreamed/solved elsewhere upstream:
- 0001-MIPS-ralink-Add-rt3352-SPI_CS1-pinmux.patch
- 0002-MIPS-pci-rt2880-set-pci-controller-of_node.patch
- 0004-MIPS-ralink-add-MT7621-pcie-driver.patch
- 0009-PCI-MIPS-enable-PCIe-on-MT7688.patch
- 0025-pinctrl-ralink-add-pinctrl-driver.patch
- 0028-GPIO-ralink-add-mt7621-gpio-controller.patch
- 0043-spi-add-mt7621-support.patch
- 0045-i2c-add-mt7621-driver.patch
- 0047-DMA-ralink-add-rt2880-dma-engine.patch
- 0053-mtd-spi-nor-add-w25q256-3b-mode-switch.patch
- 0054-mtd-spi-nor-w25q256-respect-default-mode.patch
- 0099-pci-mt7620.patch
- 304-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch

Removed because of the new NAND driver:
- 0038-Revert-mtd-nand-Remove-unused-chip-write_page-hook.patch
- 0039-mtd-add-mt7621-nand-support.patch
- 0040-nand-hack.patch

Remove patch that no longer applies (needs rework):
- 0034-NET-multi-phy-support.patch

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: mtk-mmc: set correct DMA mask
DENG Qingfang [Fri, 17 Jan 2020 08:04:14 +0000 (16:04 +0800)]
ramips: mtk-mmc: set correct DMA mask

Since commit f8c55dc ("MIPS: use generic dma noncoherent ops for
simple noncoherent platforms") changed MIPS dma handling, the mmc
driver fails because it doesn't have a dma mask is set.

So set the correct dma mask.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: move MTK MMC driver to files directory
DENG Qingfang [Sun, 1 Mar 2020 09:02:06 +0000 (17:02 +0800)]
ramips: move MTK MMC driver to files directory

Move MTK MMC driver from "files-4.14" to "files" so kernel 5.4
can use it

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: copy patches and kernel config to 5.4
DENG Qingfang [Sun, 1 Mar 2020 09:01:09 +0000 (17:01 +0800)]
ramips: copy patches and kernel config to 5.4

Copy patches and kernel config to 5.4 for ramips

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agobcm53xx: refactor board.d code in 02_network
Rafał Miłecki [Fri, 3 Apr 2020 13:55:01 +0000 (15:55 +0200)]
bcm53xx: refactor board.d code in 02_network

1. Use functions for cleaner code
2. Always execute WAN interface generic code

Before this change WAN interface code wasn't executed on all devices due
to an early "exit 0".

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
4 years agokernel: add module for Mellanox mlx Network Driver
Tan Zien [Sun, 5 Jan 2020 21:16:43 +0000 (05:16 +0800)]
kernel: add module for Mellanox mlx Network Driver

add module to support Mellanox Connect-X card
mlx4 supports ConnectX-3 series and previous cards
mlx5 supports Connect-IB/ConnectX-4 series and later cards

Signed-off-by: Tan Zien <nabsdh9@gmail.com>
4 years agoimx6: bootscript: use partition UUID for rootfs if possible
Tim Harvey [Wed, 1 Apr 2020 17:23:12 +0000 (10:23 -0700)]
imx6: bootscript: use partition UUID for rootfs if possible

Specifying root filesystem by device is non-deterministic for several
reasons:
 - USB device unmeration order is not garunteeed for USB storage devs
 - MMC devs ordering is determined by the instance of the MMC host
   controller including non-storage SDIO devices which can throw off
   numbering depending on kernel versions.

It is recommended to use partition UUID

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
4 years agoocteontx: switch to kernel 5.4
Tim Harvey [Wed, 1 Apr 2020 17:24:12 +0000 (10:24 -0700)]
octeontx: switch to kernel 5.4

5.4 is stable on Gateworks Newport GW610x/GW620x/GW630x/GW640x

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
4 years agobuild: refactor JSON info files to `profiles.json`
Paul Spooren [Thu, 12 Mar 2020 22:55:41 +0000 (12:55 -1000)]
build: refactor JSON info files to `profiles.json`

JSON info files contain machine readable information of built profiles
and resulting images. These files were added in commit 881ed09ee6e2
("build: create JSON files containing image info").

They are useful for firmware wizards and script checking for
reproducibility.

Currently all JSON files are stored next to the built images, resulting
in up to 168 individual files for the ath79/generic target.

This patch refactors the JSON creation to store individual per image
(not per profile) files in $(BUILD_DIR)/json_info_files and create an
single overview file called `profiles.json` in the target directory.

Storing per image files and not per profile solves the problem of
parallel file writes. If a profiles sysupgrade and factory image are
finished at the same time both processes would write to the same JSON
file, resulting in randomly broken outputs.

Some target like x86/64 do not use the image code yet, resulting in
missing JSON files. If no JSON info files were created, no
`profiles.json` files is created as it would be empty anyway.

As before, this creation is enabled by default only if `BUILDBOT` is set.

Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[json_info_files dir handling in Make, if case refactoring]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agogrub2: fix build when ASLR enabled
Kevin Darbyshire-Bryant [Wed, 1 Apr 2020 21:44:37 +0000 (22:44 +0100)]
grub2: fix build when ASLR enabled

Disable ASLR and filter '-fno-plt' from CFLAGS: solves building when
ASLR enabled by basically disabling ASLR.

Solves errors similar to:
relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE
or
module missing GLOBAL_OFFSET_TABLE

Suggested-by: 李国 <uxgood.org@gmail.com>
Acked-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agokmod-sched-cake: switch to in-tree cake for 4.19+
Kevin Darbyshire-Bryant [Mon, 29 Jul 2019 15:54:02 +0000 (16:54 +0100)]
kmod-sched-cake: switch to in-tree cake for 4.19+

Use in tree version of cake for kernels 4.19+ and backport features from
later kernel versions to 4.19.

Unfortunately PROVIDES dependency handling produces bogus circular
dependency warnings so whilst this package and kmod-sched-cake-oot
should be able to PROVIDE kmod-sched-cake this doesn't work.

Instead, remove the PROVIDES option and modify package sqm-scripts to
depend on the correct module independently.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agokmod-sched-cake: rename to kmod-sched-cake-oot
Kevin Darbyshire-Bryant [Mon, 30 Mar 2020 17:52:09 +0000 (18:52 +0100)]
kmod-sched-cake: rename to kmod-sched-cake-oot

In preparation for dropping the out of tree cake module and using
in tree cake from upstream, rename the package to kmod-sched-cake-oot
(out of tree)

Initially add a PROVIDES kmod-sched-cake so that package dependencies
can be satisfied.

Ultimately this package will be removed when linux 4.14 is removed.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agowireguard: bump to 1.0.20200401
Jason A. Donenfeld [Wed, 1 Apr 2020 20:08:42 +0000 (14:08 -0600)]
wireguard: bump to 1.0.20200401

Recent backports to 5.5 and 5.4 broke our compat layer. This release is
to keep things running with the latest upstream stable kernels.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
4 years agomac80211: rt2x00: prune more unnecessary exports
Daniel Golle [Mon, 30 Mar 2020 22:35:04 +0000 (23:35 +0100)]
mac80211: rt2x00: prune more unnecessary exports

The calibration patches for MT7620 unnecessarily export symbols and
populate never accessed function pointers. Remove all that and make
functions static as the only place where each of those functions is
called is within rt2800lib.c.
Also make code more readable by fixing indentation, removing
unnecessary parantheses and simplifying some instructions using
shorthands here and there.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agojansson: convert to cmake
Kevin Darbyshire-Bryant [Tue, 31 Mar 2020 12:01:18 +0000 (13:01 +0100)]
jansson: convert to cmake

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agoopenssl: bump to 1.1.1f
Eneas U de Queiroz [Tue, 31 Mar 2020 20:51:45 +0000 (17:51 -0300)]
openssl: bump to 1.1.1f

There were two changes between 1.1.1e and 1.1.1f:
- a change in BN prime generation to avoid possible fingerprinting of
  newly generated RSA modules
- the patch reversing EOF detection we had already applied.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
4 years agooxnas: some improvements for Shuttle KD20
Daniel Golle [Sat, 28 Mar 2020 21:55:31 +0000 (21:55 +0000)]
oxnas: some improvements for Shuttle KD20

 * install kmod-hwmon-drivetemp by default
 * wire up thermal zone
 * fix fan GPIO polarity
 * fix i2c-gpio GPIO_OPEN_DRAIN

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agooxnas: fix warning in SATA driver
Daniel Golle [Tue, 31 Mar 2020 19:27:11 +0000 (20:27 +0100)]
oxnas: fix warning in SATA driver

drivers/ata/sata_oxnas.c: In function 'sata_oxnas_port_irq':
drivers/ata/sata_oxnas.c:2126:25: warning: left shift count >= width of type [-Wshift-count-overflow]
  if (ap->qc_active & (1 << ATA_TAG_INTERNAL)) {
                           ^~

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agoipq40xx: fix DAP-2610 boot failure
Petr Štetiar [Tue, 31 Mar 2020 14:03:55 +0000 (16:03 +0200)]
ipq40xx: fix DAP-2610 boot failure

Albert has reported, that his DAP-2610 wont boot with the latest
snapshot and Fredrik has found out, that the device gets stuck at
"Waiting for root device ..." due to missing 5.4 kernel config symbol
CONFIG_MTD_SPLIT_WRGG_FW which was probably lost during the kernel
version bump.

Ref: https://forum.openwrt.org/t/dap-2610-bricked-help-needed
Fixes: 272e0a702a2b ("ipq40xx: add v5.4 support")
Suggested-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agox86/64: add cdrom and iso9660 drivers
李国 [Fri, 27 Mar 2020 11:16:26 +0000 (19:16 +0800)]
x86/64: add cdrom and iso9660 drivers

The iso image need cdrom and iso9660 drivers to boot, otherwise it will
hang when mounting the root file system

Signed-off-by: 李国 <uxgood.org@gmail.com>
4 years agox86: generate EFI platform bootable images
李国 [Thu, 26 Mar 2020 06:05:33 +0000 (14:05 +0800)]
x86: generate EFI platform bootable images

Add EFI platform bootable images for x86 platforms. These images can
also boot from legacy BIOS platform.

EFI System Partition need to be fat12/fat16/fat32 (not need to load
filesystem drivers), so the first partition of EFI images are not ext4
filesystem any more.

GPT partition table has an alternate partition table, we did not
generate it. This may cause problems when use these images as qemu disk
(kernel can not find rootfs), we pad enough sectors will be ok.

Signed-off-by: 李国 <uxgood.org@gmail.com>
[part_magic_* refactoring, removed genisoimage checks]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agogrub2: make some change to add efi platform support
李国 [Thu, 26 Mar 2020 05:51:32 +0000 (13:51 +0800)]
grub2: make some change to add efi platform support

1.generate boot image at Package/install section
2.move boot image to $(STAGING_DIR_IMAGE)/grub2/
3.add efi variant to support efi platform

Signed-off-by: 李国 <uxgood.org@gmail.com>
4 years agofirmware-utils: ptgen: add GPT support
李国 [Thu, 26 Mar 2020 05:47:40 +0000 (13:47 +0800)]
firmware-utils: ptgen: add GPT support

Add GPT support to ptgen, so we can generate EFI bootable images.

Introduced two options:
    -g        generate GPT partition table
    -G GUID   use GUID for disk and increase last bit for all partitions

We drop The alternate partition table to reduce size, This may cause
problems when generate vmdk images or vdi images. We have to pad enough
sectors when generate these images.

Signed-off-by: 李国 <uxgood.org@gmail.com>
[fixed compilation on macOS]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agobcm27xx-gpu-fw: update to latest version from RPi foundation
Álvaro Fernández Rojas [Tue, 31 Mar 2020 11:22:59 +0000 (13:22 +0200)]
bcm27xx-gpu-fw: update to latest version from RPi foundation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
4 years agobcm27xx: update 5.4 patches from RPi foundation
Álvaro Fernández Rojas [Tue, 31 Mar 2020 07:26:30 +0000 (09:26 +0200)]
bcm27xx: update 5.4 patches from RPi foundation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
4 years agowireguard: bump to 1.0.20200330
Jason A. Donenfeld [Tue, 31 Mar 2020 00:25:29 +0000 (18:25 -0600)]
wireguard: bump to 1.0.20200330

* queueing: backport skb_reset_redirect change from 5.6
* version: bump

This release has only one slight change, to put it closer to the 5.6
codebase, but its main purpose is to bump us to a 1.0.y version number.
Now that WireGuard 1.0.0 has been released for Linux 5.6 [1], we can put
the same number on the backport compat codebase.

When OpenWRT bumps to Linux 5.6, we'll be able to drop this package
entirely, which I look forward to seeing.

[1] https://lists.zx2c4.com/pipermail/wireguard/2020-March/005206.html

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
4 years agogeneric: mips: exclude more dsemul code when fpu-emu is not enabled
Yousong Zhou [Tue, 3 Mar 2020 15:09:47 +0000 (23:09 +0800)]
generic: mips: exclude more dsemul code when fpu-emu is not enabled

The patch is backported from mips-next.  In addition to minor reduction
of code size and runtime memory use, the more apparent difference is
that the delay slot emulation page will not be present for those targets
with fpu emulation disabled (CONFIG_MIPS_FP_SUPPORT=n)

Memory maps of busybox before and after this change

  root@OpenWrt:/# cat /proc/self/maps
  00400000-00449000 r-xp 00000000 00:02 23         /bin/busybox
  00458000-00459000 r-xp 00048000 00:02 23         /bin/busybox
  00459000-0045a000 rwxp 00049000 00:02 23         /bin/busybox
  77dc0000-77de2000 r-xp 00000000 00:02 273        /lib/libgcc_s.so.1
  77de2000-77de3000 r-xp 00012000 00:02 273        /lib/libgcc_s.so.1
  77de3000-77de4000 rwxp 00013000 00:02 273        /lib/libgcc_s.so.1
  77de4000-77e7b000 r-xp 00000000 00:02 271        /lib/libc.so
  77e8a000-77e8c000 rwxp 00096000 00:02 271        /lib/libc.so
  77e8c000-77e8e000 rwxp 00000000 00:00 0
  7fd86000-7fda7000 rw-p 00000000 00:00 0          [stack]
  7fefd000-7fefe000 r-xp 00000000 00:00 0
  7ffe6000-7ffe7000 r--p 00000000 00:00 0          [vvar]
  7ffe7000-7ffe8000 r-xp 00000000 00:00 0          [vdso]

  root@OpenWrt:/# cat /proc/self/maps
  00400000-00449000 r-xp 00000000 00:02 23         /bin/busybox
  00458000-00459000 r-xp 00048000 00:02 23         /bin/busybox
  00459000-0045a000 rwxp 00049000 00:02 23         /bin/busybox
  77d55000-77d77000 r-xp 00000000 00:02 274        /lib/libgcc_s.so.1
  77d77000-77d78000 r-xp 00012000 00:02 274        /lib/libgcc_s.so.1
  77d78000-77d79000 rwxp 00013000 00:02 274        /lib/libgcc_s.so.1
  77d79000-77e10000 r-xp 00000000 00:02 272        /lib/libc.so
  77e1f000-77e21000 rwxp 00096000 00:02 272        /lib/libc.so
  77e21000-77e23000 rwxp 00000000 00:00 0
  7fe23000-7fe44000 rw-p 00000000 00:00 0          [stack]
  7ff63000-7ff64000 r--p 00000000 00:00 0          [vvar]
  7ff64000-7ff65000 r-xp 00000000 00:00 0          [vdso]

Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
4 years agotplink-safeloader: update soft_ver for TP-Link Archer C6 v2 (EU)
Georgi Vlaev [Fri, 27 Mar 2020 10:33:53 +0000 (12:33 +0200)]
tplink-safeloader: update soft_ver for TP-Link Archer C6 v2 (EU)

The last couple of TP-Link firmware releases for Archer C6 v2 (EU)
have switched to version 1.2.x. Bump the soft_ver to "1.2.1" to
allow firmware updates from the vendor web interface.

TP-Link vendor firmware releases supported by this change:
* Archer C6(EU)_V2_200110: soft_ver:1.2.1 Build 20200110 rel.60119
* Archer C6(EU)_V2_191014: soft_ver:1.2.0 Build 20191014 rel.33289

Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com>
4 years agoath10k-ct: Support AQL on ath10k CT_KVER-5.4
Jose Olivera [Sat, 28 Mar 2020 16:11:36 +0000 (00:11 +0800)]
ath10k-ct: Support AQL on ath10k CT_KVER-5.4

Commit ea50780 backported Airtime Queue Limits (AQL) from Linux 5.5
to OpenWrt's backports 5.4. However, this only enabled AQL for the
vanilla ath10k driver. This patch also enables it for ath10k-ct.

Tested on:
* 2xTP-Link Archer A7v5 (QCA9563/QCA988X)
* Backports version 5.4-rc8 & 5.4.27
* ath10k-ct and ath10k-ct-htt firmware version 014 to 017
* ath10k-ct driver versions dc025dc to 3d173a4 (CT_KVER-5.4)
* WPA2, 802.11krv

Tested since January 25, 2020.

Signed-off-by: Jose Olivera <oliverajeo@gmail.com>
4 years agohostapd: add abridged flag in disassoc_imminent
Nick Hainke [Tue, 24 Mar 2020 22:12:01 +0000 (23:12 +0100)]
hostapd: add abridged flag in disassoc_imminent

If the abridged flag is set to 1 the APs that are listed in the BSS
Transition Candidate List are prioritized. If the bit is not set, the
APs have the same prioritization as the APs that are not in the list.

If you want to steer a client, you should set the flag!

The flag can be set by adding {...,'abridged': true,...} to the normal
ubus call.

Signed-off-by: Nick Hainke <vincent@systemli.org>
4 years agohostapd: expose beacon reports through ubus
Nick Hainke [Fri, 6 Dec 2019 17:17:06 +0000 (18:17 +0100)]
hostapd: expose beacon reports through ubus

Subscribe to beacon reports through ubus.
Can be used for hearing map and client steering purposes.

First enable rrm:
    ubus call hostapd.wlan0 bss_mgmt_enable '{"beacon_report":True}'

Subscribe to the hostapd notifications via ubus.

Request beacon report:
    ubus call hostapd.wlan0 rrm_beacon_req
'{"addr":"00:xx:xx:xx:xx:xx", "op_class":0, "channel":1,
"duration":1,"mode":2,"bssid":"ff:ff:ff:ff:ff:ff", "ssid":""}'

Signed-off-by: Nick Hainke <vincent@systemli.org>
[rework identation]
Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agohostapd: Add 802.11r support for WPA3-Enterprise
Jesus Fernandez Manzano [Fri, 27 Mar 2020 11:19:05 +0000 (12:19 +0100)]
hostapd: Add 802.11r support for WPA3-Enterprise

Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
4 years agokernel: Enable CMOS RTC support on 5.4
Kevin Darbyshire-Bryant [Sun, 29 Mar 2020 20:38:10 +0000 (21:38 +0100)]
kernel: Enable CMOS RTC support on 5.4

Enable kernel symbol CONFIG_RTC_DRV_CMOS which was enabled in 4.14 &
4.19

Fixes FS#2905 and now my APU2 picks up time from RTC

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agoramips: Deactivate NETGEAR WNCE2001 by default
Hauke Mehrtens [Sun, 29 Mar 2020 20:33:10 +0000 (22:33 +0200)]
ramips: Deactivate NETGEAR WNCE2001 by default

The root file system is getting too big for this device and this breaks
the ramips/rt305x build.

Do not build images for this board by default to fix this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoodhcp6c: update to latest git HEAD
Hans Dedecker [Sun, 29 Mar 2020 20:21:16 +0000 (22:21 +0200)]
odhcp6c: update to latest git HEAD

f575351 ra: fix sending router solicitations

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
4 years agodnsmasq: bump to 2.81rc4
Kevin Darbyshire-Bryant [Thu, 19 Mar 2020 19:15:49 +0000 (19:15 +0000)]
dnsmasq: bump to 2.81rc4

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agonftables: implement no/json variants
Kevin Darbyshire-Bryant [Wed, 25 Mar 2020 09:13:46 +0000 (09:13 +0000)]
nftables: implement no/json variants

Replace the build time choice of json support with a package based
choice.  Users requiring a json aware version of 'nft' may now install
nftables-json.

The default choice to fulfill the 'nftables' package dependency is
'nftables-nojson'

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agojansson: import jansson from packages
Kevin Darbyshire-Bryant [Sat, 28 Mar 2020 11:27:27 +0000 (11:27 +0000)]
jansson: import jansson from packages

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agotreewide: Don't diverge from upstream default HZ settings on 4.19
Daniel Engberg [Mon, 18 Feb 2019 09:13:19 +0000 (09:13 +0000)]
treewide: Don't diverge from upstream default HZ settings on 4.19

Most targets upstream use 250Hz or even 1000Hz by default while
100Hz is hardcoded in OpenWrt's default config. Use upstream default
except for apm821xx which hardsets 1000Hz instead of platform default of
250Hz.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[Apply same changes to 5.4]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agomac80211: Update to version 5.4.27
Hauke Mehrtens [Fri, 13 Mar 2020 13:07:23 +0000 (14:07 +0100)]
mac80211: Update to version 5.4.27

The removed patches are all integrated in the upstream version now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agomac80211: Fix rt2x00 exports
Hauke Mehrtens [Sun, 29 Mar 2020 13:59:27 +0000 (15:59 +0200)]
mac80211: Fix rt2x00 exports

Do not export static functions, they are anyway not referenced by any
code in a different module.

This fixes the following compile warning:
WARNING: "rt2800_rf_aux_tx0_loopback" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_write_dc" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_configstore" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_do_sqrt_accumulation" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_configrecover" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_loft_search" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_iq_search" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_setbbptonegenerator" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_aux_tx1_loopback" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL

Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: generic: 5.4: fix mtd concat panic on read/write functions
Michal Cieslakiewicz [Fri, 27 Mar 2020 20:15:00 +0000 (21:15 +0100)]
kernel: generic: 5.4: fix mtd concat panic on read/write functions

Commit 2431c4f5b46c32c4ac495456b1ef4ce59c0bb85d ("mtd: Implement
mtd_{read,write}() as wrappers around mtd_{read,write}_oob()") for kernel 5.4
restrict mtd devices to register only one type of read/write functions
(either generic or OOB).

mtd concat does not follow above rule and defines both methods at the same
time, causing this type of device to be rejected by kernel. For routers that
use mtd concat for root UBI volume that means kernel panic and boot loop with
following error:

[    0.767307] Creating 1 MTD partitions on "ubi-concat":
[    0.772547] 0x000000000000-0x000007500000 : "ubi"
[    0.777953] ------------[ cut here ]------------
[    0.782683] WARNING: CPU: 0 PID: 1 at drivers/mtd/mtdcore.c:621 add_mtd_device+0x84/0x5f4
[    0.790983] Modules linked in:
[    0.794093] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.24 #0
[    0.799932] Stack : 80680000 8062af20 00000000 00000000 8062a0f0 87c2dae4 87c282fc 8065fd23
[    0.808430]         805c64f4 00000001 807b32d8 80670000 80670000 00000001 87c2da98 25c15bcb
[    0.816909]         00000000 00000000 807e0000 0000006e 61696e74 00000000 2e342e32 34202330
[    0.825397]         0000006e cef2ada7 00000000 000c1ded 00000000 00000009 00000000 8034de64
[    0.833889]         00000009 80670000 80670000 80676d18 00000000 80320044 00000000 807b0000
[    0.842381]         ...
[    0.844861] Call Trace:
[    0.847367] [<80069994>] show_stack+0x30/0x100
[    0.851913] [<8007e8ac>] __warn+0xc0/0x10c
[    0.856072] [<8007e954>] warn_slowpath_fmt+0x5c/0xac
[    0.861134] [<8034de64>] add_mtd_device+0x84/0x5f4
[    0.866001] [<80352a50>] add_mtd_partitions+0xd8/0x1b8
[    0.871231] [<803527b8>] parse_mtd_partitions+0x238/0x3f8
[    0.876717] [<8034e51c>] mtd_device_parse_register+0x48/0x1b0
[    0.882586] [<8038dd2c>] virt_concat_probe+0x170/0x1ec
[    0.887820] [<803334c8>] platform_drv_probe+0x40/0x94
[    0.892970] [<80331638>] really_probe+0x104/0x35c
[    0.897766] [<80331d54>] device_driver_attach+0x70/0x98
[    0.903072] [<80331ddc>] __driver_attach+0x60/0x100
[    0.908042] [<8032f668>] bus_for_each_dev+0x68/0xa4
[    0.912989] [<803309d4>] bus_add_driver+0x1f0/0x200
[    0.917952] [<80332448>] driver_register+0x84/0x148
[    0.922906] [<80060a1c>] do_one_initcall+0x7c/0x1dc
[    0.927870] [<80684e14>] kernel_init_freeable+0x158/0x23c
[    0.933361] [<805387d8>] kernel_init+0x10/0xf0
[    0.937883] [<80064dd8>] ret_from_kernel_thread+0x14/0x1c
[    0.943375] ---[ end trace 62e0927fba490f68 ]---
[...]
[    2.266513] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    2.274893] Rebooting in 1 seconds..

This patch makes mtd concat to follow new mtd requirements by registering
either normal or oob versions of read/write functions, but not both at the
same time. OOB is used only when underlying mtd devices provide such
functionality (like NAND chips) - otherwise generic methods are used.

Tested successfully on Netgear WNDR4300.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
4 years agoarchs38: switch to kernel 5.4 by default
Evgeniy Didin [Sat, 28 Mar 2020 11:12:36 +0000 (14:12 +0300)]
archs38: switch to kernel 5.4 by default

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
4 years agoarchs38: Add patch for gcc8 compilance
Evgeniy Didin [Sat, 28 Mar 2020 11:12:35 +0000 (14:12 +0300)]
archs38: Add patch for gcc8 compilance

Building Linux kernel version 5.4.x with GCC8 ends up
with internal compiler error. The workaround on this issue
can be introdution of additional compiler option "--mmpy-option=2"

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
4 years agoarchs38: add kernel 5.4 config
Evgeniy Didin [Sat, 28 Mar 2020 11:12:34 +0000 (14:12 +0300)]
archs38: add kernel 5.4 config

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
[run make kernel_oldconfig CONFIG_TARGET=target]
[Do not deactivate CONFIG_NET_VENDOR_*]
[Activate CONFIG_HARDENED_USERCOPY]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: update arc-specific patch
Evgeniy Didin [Sat, 28 Mar 2020 11:12:37 +0000 (14:12 +0300)]
kernel: update arc-specific patch

This patch updates arc-specific patch by moving declaration
of struct object before it's usage.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>