Configure: Avoid SIXTY_FOUR_BIT for linux-mips64

This is a 32-bit ABI build (as opposed to linux64-mips64).
Setting SIXTY_FOUR_BIT breaks hardware optimizations, at least on
octeon processors.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11725)

dev/release.sh: Add --reviewer to set reviewers

Doing this is kind of contrary to how we normally do things, as this
constitutes a kind of pre-approval.  However, without this, the normal
review process will modify the reviewed commits, and render the
annotated release tag invalid, which forces the person doing the
release to re-tag manually.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11630)

Pass "-z defs" to the linker via "-Wl,-z,defs" rather than with gcc's -z
flag (which is not supported by older compilers).

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11815)

test/evp_extra_test.c: Add OPENSSL_NO_CMAC around CMAC test

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11833)

PROV: make some DER AID arrays non-static, to avoid clang complaints

The problem encountered is that some arrays were deemed unnecessary by
clang, for example:

    providers/common/der/der_rsa.c:424:28: error: variable 'der_aid_sha224Identifier' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
    static const unsigned char der_aid_sha224Identifier[] = {
                               ^

However, these arrays are used in sizeof() expressions in other parts
of the code that's actually used, making that warning-turned-error a
practical problem.  We solve this by making the array non-static,
which guarantees that the arrays will be emitted, even though
unnecessarily.  Fortunately, they are very small.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

.travis.yml: never use -Werror, use --strict-warnings instead

There are a few things in the OpenSSL code that are known to give
warnings that we know are harmless.  We test our builds accordingly.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

test/recipes/15-test_rsapss.t: Add test with unrestricted signature

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

test/ssl-tests/20-cert-select.cnf.in: Re-enable RSA-PSS related tests

There were a few RSA-PSS related tests that were disabled for non-default
library contexts.  We now re-enable them.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

test/evp_pkey_provided_test.c: Display first, compare after

To make it easier to check the generated key manually, display it
before comparing diverse other serializations.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

PROV & ASYM_CIPHER: Adapt the RSA asymmetric cipher code for PSS-parameters

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

EVP: Refactor the RSA-PSS key generation controls for providers

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

PROV & SIGNATURE: Adapt the RSA signature code for PSS-parameters

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

EVP: For SIGNATURE operations, pass the propquery early

Instead of passing it with signature->digest_verify_init() and
signature->digest_sign_init(), we pass it with signature->newctx().
This allows the digests that are indicated by RSA PSS parameters
to have a useful propquery.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

PROV & SERIALIZER: Adapt the RSA serializers for PSS-parameters

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

PROV & KEYMGMT: Add PSS-parameter support in the RSA KEYMGMT implementation

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

PROV: Refactor the RSA SIGNATURE implementation for better param control

We want to catch errors in passed parameters early, which requires
kowledge of the ongoing operation.  Fortunately, that's possible by
re-using the EVP_PKEY_OP macros in specific init functions.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

PROV: Refactor the RSA DER support

We separate out the NIST arc OIDs to a separate file, so it can be
re-used, and also the DIGEST OIDs.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

DER writer: Add the possibility to abandon empty SEQUENCEs

In some cases, a SEQUENCE that contains only optional fields may end
up empty.  In some cases, this may be represented by dropping the
SEQUENCE entirely from the encoded DER.

To do this, we detect the case where WPACKET_FLAGS_ABANDON_ON_ZERO_LENGTH
is used, and adapt accordingly.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

RSA: Add PSS-parameter processing in EVP_PKEY_ASN1_METHOD functions

The import and export functions are affected.  We also refactor them
to assign the RSA key type more carefully.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

RSA: Add a less loaded PSS-parameter structure

RSA_PSS_PARAMS carries with it a lot of baggage in form of X509_ALGOR
and ASN1_INTEGER, which we would rather avoid in our providers.
Therefore, we create a parallell structure - RSA_PSS_PARAMS_30 - that
contains the same information, but uses numeric identities (*) and C
integers (**).  This makes it simpler to handle.

Note that neither this structure nor its contents are passed between
libcrypto and the providers.  Instead, the numeric identities are
translated to and from names, which are then passed over that
boundary.

For future considerations, we might consider dropping RSA_PSS_PARAMS
entirely.  For now, it's still reserved for EVP_PKEY_ASN1_METHOD code,
which RSA_PSS_PARAMS_30 is (almost entirely) reserved for use in our
providers.

(*) We use NIDs in this case, because we already have them and because
only algorithms that libcrypto knows about are permitted in PSS
restrictions.  We could use any number series we want, as long as we
know for sure what they represent.

(**) That's for saltlen and for trailerfield, which are never expect
to surpass the set of numbers that fit in a regular 'int'.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

RSA: Add rsa_schemes.c, to store scheme data and translator functions

The scheme currently added is OAEP-PSSDigestAlgorithms codified.
The translator functions translate an EVP_MD into a NID, and a NID
into a name, to support the creation and parsing of OSSL_PARAM items.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

RSA: Extract much of the rsa_pkey_export_to() code to a separate function

The resulting function, rsa_todata(), is designed to be usable by
providers as well.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

RSA: Add RSA key types

The support of restricted RSA key types (OAEP and PSS) was lacking, or
dependent on the presence of restriction parameters.  For example,
this means that even though an RSA-PSS key may have been generated, it
may appear as a plain unrestricted RSA key if parameters weren't
present (which is the case when default restriction parameters are
used)

To make it clearer what an RSA key is intended for, and avoid
depending in an EVP_PKEY, we introduce RSA key types.  This is done by
reserving a section of the RSA flags (4 bits, which allows a total of
16 different types).

This isn't terribly important for EVP_PKEY_ASN1_METHOD code, as that
has access to the wrapping EVP_PKEY.  This is very important for
provider code, which has no access to the wrapping EVP_PKEY.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11710)

test/evp_extra_test.c: Add test for CMAC keygen with a NULL engine

Verifies that #11671 is fixed

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11674)

EVP: Only use the engine when one is defined, in pkey_mac_ctrl()

Fixes #11671

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11674)

Add documentation for ASN1_INTEGER_new() and ASN1_INTEGER_free()

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11795)

Rename OSSL_CMP_CTX_set1_clCert() to OSSL_CMP_CTX_set1_cert()

Also update documentation and example code in openssl-cmp.pod.in

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)

Add -reqin_new_tid option to apps/cmp.c and OSSL_CMP_MSG_update_transactionID()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)

Improve CMP documentation regarding use of untrusted certs

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)

Chunk 11 of CMP contribution to OpenSSL: CMP command-line interface

Certificate Management Protocol (CMP, RFC 4210) extension to OpenSSL
Also includes CRMF (RFC 4211) and HTTP transfer (RFC 6712).
Adds the CMP and CRMF API to libcrypto and the "cmp" app to the CLI.
Adds extensive documentation and tests.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)

Preliminary fix of memory leak in try_decode_PKCS12() - full fix is in #11733

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)

Improve description of algorithm NIDs in doc/man3/OSSL_CMP_CTX_new.pod

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)

Reflect constifications of 62dcd2aa in doc/man3/OSSL_CRMF_MSG_get0_tmpl.pod

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11470)

OSSL_STORE: Make the 'file' scheme loader handle MSBLOB and PVK files

This involves exposing two pvkfmt.c functions, but only internally.

Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11756)

OSSL_STORE: Better information when prompting for pass phrases

The prompt includes the URI, to make it clear which object needs a
pass phrase.

Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11756)

OSSL_STORE: Make it possible to attach an OSSL_STORE to an opened BIO

This capability existed internally, and is now made public.

Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11756)

PROV: Adapt all our providers to use the new PROV_CTX structure

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11803)

PROV: Add a proper provider context structure for OpenSSL providers

The provider context structure is made to include the following information:

- The core provider handle (first argument to the provider init
  function).  This handle is meant to be used in all upcalls that need
  it.

- A library context, used for any libcrypto calls that need it, done in
  the provider itself.

Regarding the library context, that's generally only needed if the
provider makes any libcrypto calls, i.e. is linked with libcrypto.  That
happens to be the case for all OpenSSL providers, but is applicable for
other providers that use libcrypto internally as well.

The normal thing to do for a provider init function is to create its own
library context.  For a provider that's meant to become a dynamically
loadable module, this is what MUST be done.
However, we do not do that in the default provider; it uses the library
context associated with the core provider handle instead.  This is
permissible, although generally discouraged, as long as the provider in
question is guaranteed to be built-in, into libcrypto or into the
application that uses it.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11803)

Remove explicit dependency on configdata.pm when processing .in files

For those files, the dependence on configdata.pm is automatic, adding
it explicitly only results in having that dependency twice.

Fixes #11786

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11790)

Fix FreeBSD build with --strict-warnings

apps/lib/http_server.c needs to include string.h in order to get a prototype
for strerror().

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11797)

Fix rsa8192.pem

Q: How did I do that?

A: That's a long story.

Precondition: I used sage 8.1 for the math, it could probably
done with simple python as well but I did not try.

First I extract numbers from rsa8192.pem:

openssl rsa -in rsa8192.pem -noout -text | sed "s/://g; s/ //g;"

cut&paste the numbers into sage:

modulus
00890d9fd57e81b5ed43283d0ea020
4a1229333d6fb9c37a179375b09c4f
7b5b1cf2eb025979b6d90b709928a0
6725e04caf2b0f7fe94afbdf9f3fa5
66f1ba75c2f6dc488039f410eb5fa8
ab152b8cfdb76791bb853059438edf
ae56bc70a32a9f3e2d883e8b751d08
3797999dc81a9c4d6bdb3a75362fd1
d9c497cf5028dfcdd4cc3eb318e79f
c0db45cbeed955da8a447f0872dee5
65bde4013340e767731441fae4fa54
51356bfbc84e1271b39f111f5f8ef3
a6c8973765b39addef80306194f4ea
89fdfc8e9744866323f6936de89b2f
e2741578b8eb3c41676702fabc50ec
c376e6b7b6e7f94e7d7b5c1bab3c9f
23bb0c8f04d8aca64c309fc063c406
553e1c1421cc45060df7f48c49f5c5
b459d572e273402d6a3ff008657fe9
1936714d1823c5cad53d80630b3216
9bf70feb2ebc1af6a35ee0bf059aed
49c4e367d567e130e2846859b271fd
a8949b182e050819866b8e762ed29f
fb3f7ca14cebfc2488662be4b3980f
c8d31890a05f38ae9690cc7d9d3efc
4808e03da104a8c28bb480bb814995
a6e8b8978ab8350d90b3894e3abf7d
c4ad0956335752c8d6944b38a1715e
7d9950f49e6cdba171fbe651a2ca26
65a7c70b6e8cf3a02c2f93dad8aa95
06481cdb032d04082a5a6c6a733b65
20fa80e2ef57b9cf858ca5ea11e084
bc31a386fc6b099f069786207f80d6
1f2bef294400d59394ad1006431366
a54ae09b0ecd3377dcd8af8fde9b94
fd559b0b7adc5113ba66fc4b3dc842
ee562cfcfd39b4ffc31576635873fc
59535b7aa98605772436c251834e23
4fb2347cc970a49818cac2a9ee95eb
b55fa2da66edd53e11245c6732140a
ae41491288cbf462eef8a807b46d0d
affa38d9ccfe8033d2d4a3cf5c5b82
9df12183f7a05d3650153cd317a017
083ac641c2c3ad11305de0a032be45
c439bd7bbbe3cb97850f9d2c66f72a
4a66e9d434544fc6d294ca3c92627b
e518bfa44e3017ac8ad9c0a26a227d
2e8677da0a4de8edb53ac9530adb63
83c72dbf562dc4d0fea4e492f09eb1
74548381a8686db3aeaaa3a9960cff
25e8c64701115da54fa7a1fb2c566a
fcb4b2a63268d818c3391a62885d13
41b3492c4f0167291b3d026a44e68c
02f2d4d255d4c0906b92a2ced0c0bb
f2bcdceaec1189895af4232dc386c9
75bf3477e5a70d3ab0ac0e5dc37024
0e34a276b155d5e290f77416a1986d
ec47f8c78236ac7df249df9ba21a80
2e6bd75b4fb1c6ffe0f4cf548761a5
6a1fcccee156523a718987f3fdaedc
7171c9050db89a83f24c5a283695b9
c28de6d3b69fc1714b0add335a0ce6
fbbdbd0bbdb01e44969d775105bba3
d2947dca2f291250f9b851e76f514d
dc5a3aa4498e6521314991568860eb
ff1258d8b4aee9ee4159153684c0c0
16c60b17537a50b53cd59aad60678b
d73f0714ab4ccae7416bab417b4907
36d59b2e9f

I used echo `echo "<paste>" ` | sed "s/ //g"
to get everything in one line, put that again
into the clipboard and
then start sage, type N=0x<paste><CR>

sage: N=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

likewise for prime1 (P), prime2 (Q) and
privateExponent (D) and publicExponent (E)

sage: P=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
sage: Q=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
sage: D=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
sage: E=0x10001

check:
sage: is_pseudoprime(P)
True
sage: gcd(N,P)
811194519730394220204949383061971492284209477134487451053533919242408334468793875483685418435472924384137737409878754330061341487239404629370463160720071782806016579636145456953095810661706004899017496722730291178259805745059054744795252171022091469940626116746608128441399036310378334222880519662696558703165249434265697658704322903051581598088400258377253583825209022558177374913570364047051007093402547387492492645729748176160840842076964161794363721255756097675823463557162877865622894488049720201680509519072521257128596878592149455958732762099800396648453225220977153025222265023206761554302369499402146842619059859650958489842850140873473393484632985863967898676228674751576699965523367097641503814266418957281198265955430221973482931544501209059788536033857660452959160612655542331433647351037413298986228798018950712662579341162832440884265576141868775326408627532047094505284395403786932363148262901839514736964209136867574532808481484592060405175685831168554790879720280778881035860464184791941816702480873202940903024652495084770128062224279875598826600084633389722629461385386069921483006677287847102371176994910369378323222717613076771700378608286670543729473076010314569999636269167049088093674649352610884381826740603
sage: N%P
0

>> P seems to be a prime, and is indeed a factor of N.

sage: is_pseudoprime(Q)
False
sage: gcd(N,Q)
1
sage: ecm(Q)
Found composite factor of 3 digits: 675
Composite cofactor ... has 1231 digits.
Q has a small factor.  The large cofactor
is way too large to be factorized (today).

>> Q must be wrong.

sage: pow(pow(2,E,N),D,N)
2
sage: pow(pow(3,E,N),D,N)
3
sage: pow(pow(5,E,N),D,N)
5
sage: pow(pow(7,E,N),D,N)
7
sage: pow(pow(11,E,N),D,N)
11
sage: pow(pow(1000,E,N),D,N)
1000

>> x^D mod N is indeed the inverse of x^E mod N
>> D seems to be correct.

>> now compute
sage: Qcorrect = N/P
sage: is_prime(Qcorrect)
False
sage: is_pseudoprime(Qcorrect)
True

>> surprise, this is a sage artefact.
>> is_prime is supposed to tell if Qcorrect
>> is a provable prime, but these numbers are
>> too large for a proof.

sage: help(Qcorrect)
class Rational
...

>> oops, it is of course not a rational number.

sage: Qcorrect = Integer(N/P)
class Integer
...

>> okay now it is an integer.

sage: is_prime(Qcorrect)
>> takes way too long: press CTRL-C
sage: is_pseudoprime(Qcorrect)
True

>> so the correct Q seems to be a prime.

sage: Q-Qcorrect
4468358315186607582623830645994123175323958284313904132666602205502546750542721902065776801908141680869902222733839989940221831332787838985874881107673910358472026239723185949529735314601712865712198736991916521419325287976337589177915143787138292689484229106140251936135768934015263941567159094923493376
sage: hex(Q-Qcorrect)
'1a10400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'

>> interesting, now figure out the bits that are flipped in Q:

Q         ...20ddb67189f6dad...
Qcorrect  ...20dd9c6149f6dad...

$ openssl rsa -in rsa8192.pem -outform der -out rsa8192.der
writing RSA key
$ xxd -ps < rsa8192.der > rsa8192.hex
$ sed "s/20ddb67189f6dad/20dd9c6149f6dad/" < rsa8192.hex > rsa8192.out
$ diff rsa8192.hex rsa8192.out
100c100
< 10b8095f420ddb67189f6dad62f1257b0f46e353a90eacc145c7db74998a
---
> 10b8095f420dd9c6149f6dad62f1257b0f46e353a90eacc145c7db74998a

>> et voila

$ xxd -ps -r < rsa8192.out > rsa8192.der
$ openssl rsa -inform der -in rsa8192.der -out rsa8192.pem
writing RSA key
$ openssl rsa -check -noout -in rsa8192.pem
RSA key ok
$ git diff
diff --git a/apps/rsa8192.pem b/apps/rsa8192.pem
index 946a6e5..83d962f 100644
--- a/apps/rsa8192.pem
+++ b/apps/rsa8192.pem
@@ -1,5 +1,4 @@
 -----BEGIN RSA PRIVATE KEY-----
-
 MIISKAIBAAKCBAEAiQ2f1X6Bte1DKD0OoCBKEikzPW+5w3oXk3WwnE97Wxzy6wJZ
 ebbZC3CZKKBnJeBMrysPf+lK+9+fP6Vm8bp1wvbcSIA59BDrX6irFSuM/bdnkbuF
 MFlDjt+uVrxwoyqfPi2IPot1HQg3l5mdyBqcTWvbOnU2L9HZxJfPUCjfzdTMPrMY
@@ -62,7 +61,7 @@ JH1/Qx7C/mTAMRsN5SkOthnGq0djCNWfPv/3JV0H67Uf5krFlnwLebrgfTYoPPdo
 yO7iBUNJzv6Qh22malLp4P8gzACkD7DGlSTnoB5cLwcjmDGg+i9WrUBbOiVTeQfZ
 kOj1o+Tz35ndpq/DDUVlqliB9krcxva+QHeJPH53EGI+YVg1nD+s/vUDZ3mQMGX9
 DQou2L8uU6RnWNv/BihGcL8QvS4Ty6QyPOUPpD3zc70JQAEcQk9BxQNaELgJX0IN
-22cYn22tYvElew9G41OpDqzBRcfbdJmKXQ2HcroShutYJQRGUpAXHk24fy6JVkIU
+2cYUn22tYvElew9G41OpDqzBRcfbdJmKXQ2HcroShutYJQRGUpAXHk24fy6JVkIU
 ojF5U6cwextMja1ZIIZgh9eugIRUeIE7319nQNDzuXWjRCcoBLA25P7wnpHWDRpz
 D9ovXCIvdja74lL5psqobV6L5+fbLPkSgXoImKR0LQKCAgAIC9Jk8kxumCyIVGCP
 PeM5Uby9M3GMuKrfYsn0Y5e97+kSJF1dpojTodBgR2KQar6eVrvXt+8uZCcIjfx8
@@ -98,4 +97,3 @@ TwEgE67iOb2iIoUpon/NyP4LesMzvdpsu2JFlfz13PmmQ34mFI7tWvOb3NA5DP3c
 rMlMLtKfp2w8HlMZpsUlToNCx6CI+tJrohzcs3BAVAbjFAXRKWGijB1rxwyDdHPv
 I+/wJTNaRNPQ1M0SwtEL/zJd21y3KSPn4eL+GP3efhlDSjtlDvZqkdAUsU8=
 -----END RSA PRIVATE KEY-----
-

>> DONE.

Fixes #11776

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11783)

Replace misleading error message when loading PEM

The error message "short header" when the end line
of PEM data cannot be identified is misleading.
Replace it with already existing "bad end line" error.

Fixes #8815

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/11793)

CORE: Attach the provider context to the provider late

There are concerns that if |prov->provctx| is populated early,
sensitive information may leak from the provider.  Therefore, we use a
temporary variable, and only assign it to |prov->provctx| when the
provider init function has returned successfully.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11777)

Fix some misunderstandings in our providers' main modules

This started with adding forward declarations of all provider side
interface functions, and fixing all compiler errors.

Furthermore, diminish the faulty assumption that the provider context
is and always will be just a library context.  That means adding a
teardown function in all providers that aren't necessarily built into
libcrypto.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11777)

CORE: Fix the signature of OSSL_provider_query_operation_fn

For some reason, the 'no_cache' parameter was declare 'const', when
it's in fact supposed to be modifiable.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11777)

Fix d2i_PrivateKey_ex() to work as documented

d2i_PrivateKey(), and thereby d2i_PrivateKey_ex(), is documented to
return keys of the type given as first argument |type|, unconditionally.
Most specifically, the manual says this:

> An error occurs if the decoded key does not match type.

However, when faced of a PKCS#8 wrapped key, |type| was ignored, which
may lead to unexpected results.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11787)

Fix CHANGES.md issues reported by markdownlint

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11788)

doc: fix two invalid <B> tags

Signed-off-by: Beat Bolli <dev@drbeat.li>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/11759)

Extract HTTP server code from apps/ocsp.c to apps/lib/http_server.c

Also adds apps/include/http_server.h.
This is used so far by apps/ocsp.c and is going to be used for apps/cmp.c
and will be helpful also for any future app acting as HTTP server.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11736)

Fix bio_wait() in crypto/bio/bio_lib.c in case OPENSSL_NO_SOCK

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11736)

Constify 'req' parameter of OSSL_HTTP_post_asn1()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11736)

Fix bug in OSSL_CMP_SRV_process_request() on transaction renewal

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11736)

doc: remove deprecation notes for apps that are staying.

The apps that are staying are: dhparam, dsa, dsaparam, ec, ecparam, gendsa and
rsa.

The rsautl app remains deprecated.

The -dsaparam option to dhparam also remains deprecated.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11575)

Fix PEM certificate loading that sometimes fails

As described in https://github.com/openssl/openssl/issues/9187, the
loading of PEM certificates sometimes fails if a line of base64
content has the length of a multiple of 254.
The problem is in get_header_and_data(). When such a line with a
length of 254 (or a multiple) has been read, the next read will
only read a newline. Due to this get_header_and_data() expects to be
in the header not in the data area. This commit fixes that by checking
if lines have been read completely or only partially. In case of a
previous partial read, a newline will be ignored.

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/11741)

Fix issues reported by markdownlint

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11739)

travis: enable markdownlint checks

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/11739)

EVP: when setting the operation to EVP_PKEY_OP_UNDEFINED, clean up!

There were a few instances where we set the EVP_PKEY_CTX operation to
EVP_PKEY_OP_UNDEFINED, but forgot to clean up first.  After the
operation is made undefined, there's no way to know what should be
cleaned away, so that must be done first, in all spots.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11750)

Fix use-after-free in BIO_C_SET_SSL callback

Since the BIO_SSL structure was renewed by `ssl_free(b)/ssl_new(b)`,
the `bs` pointer needs to be updated before assigning to `bs->ssl`.

Thanks to @suishixingkong for reporting the issue and providing a fix.

Closes #10539

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11746)

SSL_OP_DISABLE_TLSEXT_CA_NAMES option implementation

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11709)

Add documentation for CMS_EnvelopedData_create()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11529)

Remove legacy FIPS_mode functions

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11680)

Add RSA SHA512 truncated digest support

Partial Fix for #11648.

Some additional work still needs to be done to support RSA-PSS mode.

RSA legacy digests will be addressed in another PR.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11681)

Add OIDS for md4 and ripemd160 to der_rsa

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11696)

Remove gen_get_params & gen_gettable_params from keygen operation

EVP_PKEY_CTX_gettable_params() was missing code for the keygen operation.
After adding it it was noticed that it is probably not required for this type, so instead
the gen_get_params and gen_gettable_params have been remnoved from the provider interface.
gen_get_params was only implemented for ec to get the curve name. This seems redundant
since normally you would set parameters into the keygen_init() and then generate a key.
Normally you would expect to extract data from the key - not the object that we just set up
to do the keygen.

Added a simple settable and gettable test into a test that does keygen.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11683)

Remove cipher table lookup from EVP_CipherInit_ex

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11731)

Configure: avoid perl regexp bugs

It seems that in older perl versions '(?P' doesn't interact very well
with '(?|' or '(?:'.

Since we make extensive use of '(?P' in build.info parsing, we avoid
combining that with '(?|' and '(?:' when parsing build.info variables,
and end up parsing variable modifier twice (first generally, and then
parse that result into the modifier components).

Fixes #11694

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11737)

s_server normal shutdown

Partially fixes #11209

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11734)

Extend test_ssl_get_shared_ciphers

Ensure we test scenarios where a FIPS peer is communication with a
non-FIPS peer. Check that a FIPS client doesn't offer ciphersuites it
doesn't have, and that a FIPS server only chooses ciphersuites it can
support.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11700)

Don't offer or accept ciphersuites that we can't support

We were not correctly detecting whether TLSv1.3 ciphersuites could
actually be supported by the available provider implementations. For
example a FIPS client would still offer CHACHA20-POLY1305 based
ciphersuites even though it couldn't actually use them. Similarly on
the server would try to use CHACHA20-POLY1305 and then fail the
handshake.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11700)

Fix a memory leak in CONF .include handling

If OPENSSL_CONF_INCLUDE has been set then we may leak the "include"
buffer.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11691)

Centralise Environment Variables for the tests

The test_includes test was failing if OPENSSL_CONF_INCLUDE happened to
be set in the user's environment. To ensure that no tests accidentally
use this or other enviroment variables from the user's environment we
automatically set them centrally for all tests.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11691)

The synthesized OPENSSL_VERSION_NUMBER must be long

(to keep API compatibility with older releases)

Fixes #11716

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/11732)

Fix up whitespace nits introduced by PR #11416

Expand a couple literal tabs, and de-indent the body of a function.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11728)

Use fips=yes consistently in documentation

The documentation for ``EVP_default_properties_is_fips_enabled()`` uses
``fips=yes`` in one place and ``fips=true`` in another place. Stick to
``fips=yes`` like everywhere else.

Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11723)

Strengthen X509_STORE_CTX_print_verify_cb() to print expected host etc.

Add X509_VERIFY_PARAM_get0_host(), X509_VERIFY_PARAM_get0_email(),
and X509_VERIFY_PARAM_get1_ip_asc() to support this,
as well as the internal helper function ipaddr_to_asc(), which
is used also for simplifying other IP address output functions.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/11693)

Improve SSL_shutdown documentation.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11531)

Fix aix compile error in cmp_ctx_test.c

Errors were of the form 1506-226 (S) The ":" operator is not allowed between "int" and "char*".
I think it is valid syntax the way it was written, But just rewrote so it compiled.
The aix compiler must be looking at the type of blah() when doing test ? (blah(), NULL) : X.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11698)

Fix incorrect default keysize for CAST ofb and cfb modes.

Fixes #11459

It was incorrectly using 8 bytes instead of 16 as the default.
This was verified by expanding the macros used in e_cast.c.
The issue occurs if EVP_CIPHER_CTX_set_key_length() is not called.
evp_test.c hides this issue as it always calls EVP_CIPHER_CTX_set_key_length() before
using EVP_CipherInit_ex(...., key, ..).

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11707)

Allow OSSL_PARAM_get_octet_string() to pass a NULL buffer

We may just want to know the number of octets so allow passing a NULL
buffer.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Add some tests for the newly added raw private/public key functions

We already had soem tests for the older raw private/public key functions
so we expand those to call the new versions as well and pass in a libctx.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Document the new raw private/public key functions

Document the newly added EVP_PKEY_new_raw_private_key_with_libctx and
EVP_PKEY_new_raw_public_key_with_libctx functions.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Implement key match functionality for ECX keys

This makes EVP_PKEY_cmp work for provider side ECX keys.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Fix the KEYNID2TYPE macro

This macro was not correctly handling Ed25519 keys

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Don't export ECX key data twice

We had a redundant couple of lines where we exported key data twice.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Ensure EVP_PKEY_get_raw_[private|public]_key work with provider keys

If the key is a provider key then we should export it from the provider.

Fixes #11627

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Add the library ctx into an ECX_KEY

At various points we need to be able to retrieve the current library
context so we store it in the ECX_KEY structure.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Add the ability to ECX to import keys with only the private key

ECX keys can very easily crete the public key from the private key.
Therefore when we import ecx keys it is sufficent to just have the private
key.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Ensure OSSL_PARAM_BLD_free() can accept a NULL

All OpenSSL free functions should accept NULL.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

Make EVP_new_raw_[private|public]_key provider aware

We also introduce variants which are OPENSSL_CTX aware

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11635)

rand_unix.c: Ensure requests to KERN_ARND don't exceed 256 bytes.

Requests for more than 256 bytes will fail.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11689)

rand_unix.c: Only enable hack for old FreeBSD versions on FreeBSD

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11689)

rand_unix.c: Include correct headers for sysctl() on NetBSD

This allows sysctl(KERN_ARND) to be detected properly.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11689)

CIFuzz turning dry_run off

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11339)

WPACKET: don't write DER length when we don't want to

With endfirst writing, it could be that we want to abandon any zero
length sub-packet.  That's what WPACKET_FLAGS_ABANDON_ON_ZERO_LENGTH
was supposed to make happen, but the DER length writing code didn't
look at that flag.  Now it does.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/11703)

Fix reason code clash

EVP_R_NULL_MAC_PKEY_CTX vs EVP_R_SET_DEFAULT_PROPERTY_FAILURE

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/11708)

util/perl/OpenSSL/OID.pm: remove the included unit test

The unit test uses features that appeared in perl 5.12, and is
therefore a source of trouble when building.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11704)

Add solaris assembler fixes for legacy provider

The legacy provider contains assembler references. Most code is automagically pulled in from the libcrypto - but the platform specific assembler functions will not be visible in the symbol table. Copying BNASM and DESASM into liblegacy seems to be a better solution than exposing platform specific function in libcrypto.num.

Added a missing call in the des_cbc code for sparc.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11697)

Add default property API's to enable and test for fips

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/11239)

make update for SSL_new_session_ticket

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11416)

Add test for SSL_new_session_ticket()

Run a normal handshake and then request some extra tickets,
checking that the new_session_cb is called the expected number of
times.  Since the tickets are generated in the same way as other
tickets, there should not be a need to verify that these specific ones
can be used to resume.

Run the test with both zero and a non-zero number of tickets issued in the
initial handshake.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/11416)