Florian Fainelli [Fri, 30 Jun 2017 23:34:22 +0000 (16:34 -0700)]
kmodloader: Check module endian before loading
If we manage to accidentally get a module installed that does not match
the system endianess (there is currently nothing preventing that in
OpenWrt/LEDE) we will hit a segmentation fault when doing this:
sh = (Elf32_Shdr *) (map + e->e_shoff);
because e->e_shoff will be wrongly encoded and this most likely will
result in an invalid offset to de-reference from.
Update elf_find_section() to check that the build time endianess of
kmodloader matches that of the module, otherwise nothing would work
really.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Alexander Couzens [Sun, 11 Jun 2017 10:33:34 +0000 (12:33 +0200)]
kmodloader/get_module_info: initialized aliases to make it more clean
Even when the callee looks onto the length is a good idea to zero
the points.
Found-by: Coverity Scan #1412541
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Alexander Couzens [Sun, 11 Jun 2017 10:20:59 +0000 (12:20 +0200)]
kmodloader: insmod: fix a memoryleak in error case
Found-by: Coverity Scan #1412469
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Alexander Couzens [Sun, 11 Jun 2017 10:13:05 +0000 (12:13 +0200)]
kmodloader/get_module_name: null-terminate the string
Found-by: Coverity Scan #1412291
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Dan Bugnar [Fri, 10 Mar 2017 10:06:29 +0000 (12:06 +0200)]
syslog: remove unnecessary sizeof struct between messages
The next message needs to be written after the data of current message.
This was adding "sizeof(struct log_head)" bytes between messages.
Signed-off-by: Dan Bugnar <danutbug@gmail.com>
Yousong Zhou [Fri, 3 Mar 2017 02:32:48 +0000 (10:32 +0800)]
kmodloader: modprobe: return 0 for loaded modules
This is the default behaviour with modprobe from kmod package [1] unless
it is explicitly told that the module is to be loaded for --first-time
[1] http://www.kernel.org/pub/linux/utils/kernel/kmod/
Fixes FS#433
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Thu, 23 Feb 2017 03:04:50 +0000 (11:04 +0800)]
kmodloader: don't store aliases info in struct module
This also fixes FS#544 as the possible address alignment issue should
now disappear
function old new delta
alloc_module 398 245 -153
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-153) Total: -153 bytes
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Felix Fietkau [Tue, 21 Feb 2017 13:11:03 +0000 (14:11 +0100)]
cmake: fix typo
Fixes:
fce9382b4b99 ("cmake: Check for getrandom system call")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nathan Hintz [Tue, 21 Feb 2017 05:14:24 +0000 (05:14 +0000)]
kmodloader: fix not being able to find some modules
kmodloader is using slightly different criteria for ordering the AVL tree
versus what it uses to traverse it. This sometimes results in not being
able to find some modules.
Reference: https://bugs.lede-project.org/index.php?do=details&task_id=443
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Florian Fainelli [Sun, 5 Feb 2017 02:41:34 +0000 (18:41 -0800)]
cmake: Check for getrandom system call
In case we are building against a kernel that is too old and does not
support SYS_getrandom, error out with a message indicating so.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Kevin Darbyshire-Bryant [Sun, 29 Jan 2017 09:23:15 +0000 (09:23 +0000)]
kmodloader: support '-q' quiet option
The kernel opportunistically attempts to load modules in advanced with
'predicted' module names. Often these modules don't exist and hence
kmodloader produces lots of logfile noise. The kernel commandline to
modprobe from kworker proceses is '-q -- modulename' where '-q' means
quiet. Support suppressing that noise.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Wojciech Dubowik [Mon, 23 Jan 2017 10:30:14 +0000 (11:30 +0100)]
ubox: Add an option for more accurate timestamps in log
Systemwide timestamps for syslog messages with ms accuracy are usefull
for debugging timing problems.
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Yousong Zhou [Fri, 13 Jan 2017 17:00:35 +0000 (01:00 +0800)]
kmodloader: make insert_module() idempotent
To fix spurious error messages in the following situation
1. scan loaded modules
2. load wireguard.ko and the module itself will request xt_hashlimit to
be loaded
3. xt_hashlimit is still in PROBE state here so we also try to load it,
but init_module() returns EEXIST
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Fri, 13 Jan 2017 17:00:34 +0000 (01:00 +0800)]
kmodloader: add module alias awareness
To achieve this, the following changes are made
- scan module folders before scaning loaded modules
- struct module was splited into struct module_node for the avl tree
and struct module for storing actual info about modules
The other minor fix is that module.opts is now freed in free_modules()
when appliable
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Fri, 13 Jan 2017 17:00:33 +0000 (01:00 +0800)]
kmodloader: fix out-of-bound access when parsing .modinfo
Fixes output of "modinfo nf_conntrack_ipv4"
module: /lib/modules/4.4.40/nf_conntrack_ipv4.ko
license: GPL
alias: ip_conntrack
alias: nf_conntrack-2
depends: nf_conntrack,nf_defrag_ipv4
src: %pI4 dst=%pI4
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Fri, 13 Jan 2017 17:00:32 +0000 (01:00 +0800)]
kmodloader: modprobe: skip possible command line arguments
The kernel may invocate user mode modprobe with the following scheme
modprobe -q -- <module_name>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Fri, 13 Jan 2017 17:00:31 +0000 (01:00 +0800)]
kmodloader: log to kmsg when loading directories of modules
syslog may not be ready yet before PREINIT
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Fri, 13 Jan 2017 17:00:30 +0000 (01:00 +0800)]
kmodloader: remove redundant glob wildcard char
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Rosen Penev [Sun, 18 Dec 2016 00:48:47 +0000 (16:48 -0800)]
ubox: Initialize conditionally uninitialized variabled
fixes false positive warning from "-Wconditional-uninitialized in clang"
Signed-off by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sun, 18 Dec 2016 01:12:28 +0000 (17:12 -0800)]
ubox: Fix some memory leaks
Avoids leaking memory when exiting early.
Signed-off by: Rosen <rosenp@gmail.com>
Florian Fainelli [Sun, 4 Dec 2016 02:09:39 +0000 (18:09 -0800)]
kmodloader: Fix typo in error message
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Felix Fietkau [Mon, 26 Sep 2016 14:28:52 +0000 (16:28 +0200)]
logd: put non-streamed log entries into one result message
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Alexandru Ardelean [Sat, 24 Sep 2016 08:03:13 +0000 (11:03 +0300)]
ubox/logd: free ubus context on exit
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Alexandru Ardelean [Sat, 24 Sep 2016 08:03:12 +0000 (11:03 +0300)]
ubox/logd: free regex's on log_shutdown() call
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Felix Fietkau [Thu, 22 Sep 2016 18:20:29 +0000 (20:20 +0200)]
logd: fix default initialization of line count
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Sep 2016 14:55:28 +0000 (16:55 +0200)]
logd: add support for sending log messages as replies
Useful for JSON-RPC access via uhttpd
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 22 Sep 2016 14:39:49 +0000 (16:39 +0200)]
add getrandom to .gitignore
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 5 Aug 2016 11:08:53 +0000 (13:08 +0200)]
getrandom: fix indentation, add missing return statement
Signed-off-by: Felix Fietkau <nbd@nbd.name>
John Crispin [Wed, 17 Aug 2016 02:32:43 +0000 (04:32 +0200)]
fix segfault in kmodloader when no modules path was present
Signed-off-by: John Crispin <john@phrozen.org>
Jo-Philipp Wich [Sat, 16 Jul 2016 12:52:36 +0000 (14:52 +0200)]
validate: fix datatype handling of default values
Properly handle the datatype of default values when the corresponding uci
value is unset. Also consolidate the three default value code branches into
a single one.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Hauke Mehrtens [Wed, 13 Jul 2016 14:55:20 +0000 (16:55 +0200)]
kmodloader: fix lsmod depends output
Without this patch only the first dependency is shown, with this patch
all module dependencies are show.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Florian Fainelli [Fri, 1 Jul 2016 23:05:23 +0000 (16:05 -0700)]
cmake: Find uci header file
Add a CMake FIND_PATH and INCLUDE_DIRECTORIES searching for uci.h. Some
external toolchains which do not include standard locations would fail
to find the header otherwise.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Etienne CHAMPETIER [Thu, 9 Jun 2016 13:03:00 +0000 (13:03 +0000)]
getrandom: add helper for getrandom() syscall
getrandom() was introduced in version 3.17 of the Linux kernel.
By default getrandom() block until /dev/urandom pool has been initialized
and then read from it.
Read buffer is 256 bytes so getrandom() calls always succeed.
First usage will be to save a seed for /dev/urandom.
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Felix Fietkau [Mon, 7 Mar 2016 16:34:31 +0000 (17:34 +0100)]
kmodloader: fix NULL pointer deref in case m->depends is missing
Observed on an invalid module
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Jo-Philipp Wich [Tue, 9 Feb 2016 12:49:55 +0000 (13:49 +0100)]
kmodloader: clean up memory mapping and fix fd leaks in error handling
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Jo-Philipp Wich [Tue, 9 Feb 2016 07:53:28 +0000 (08:53 +0100)]
kmodloader: fix open() error handling
Fixes kmodloader on systems without stdio and prevents fd leaks in case
descriptor zero is opened.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Felix Fietkau [Sun, 24 Jan 2016 08:19:53 +0000 (09:19 +0100)]
logread: ensure that the len < sizeof(struct blob_attr) check runs before trying to access the data
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Hauke Mehrtens [Sun, 22 Nov 2015 14:45:27 +0000 (15:45 +0100)]
fix gcc format security error
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rafał Miłecki [Tue, 14 Jul 2015 06:43:55 +0000 (08:43 +0200)]
log: allow filtering messages with a regexp pattern
This allows printing/streaming/writing messages matching a specified
basic regular expression only.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Luka Perkov [Tue, 21 Apr 2015 17:04:46 +0000 (19:04 +0200)]
logd: optimize notify function
No need to construct every time the same blob_buf for each client in the list.
Signed-off-by: Luka Perkov <luka@openwrt.org>
Luka Perkov [Tue, 21 Apr 2015 17:04:45 +0000 (19:04 +0200)]
log: make valgrind less complain by freeing allocated memory
Signed-off-by: Luka Perkov <luka@openwrt.org>
Luka Perkov [Tue, 21 Apr 2015 17:04:44 +0000 (19:04 +0200)]
log: fix whitespaces
Signed-off-by: Luka Perkov <luka@openwrt.org>
Luka Perkov [Tue, 21 Apr 2015 17:04:43 +0000 (19:04 +0200)]
log: remove unused callbacks
Signed-off-by: Luka Perkov <luka@openwrt.org>
Etienne CHAMPETIER [Wed, 1 Apr 2015 23:14:01 +0000 (01:14 +0200)]
logread: add support for non-transparent-framing for Syslog over TCP
https://tools.ietf.org/html/rfc6587#section-3.4.2
the idea is to add \n or \0 as message trailer so it's easier
to find message end
v2: simplify, use \n by default, with optional \0
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
John Crispin [Sat, 28 Mar 2015 14:38:09 +0000 (15:38 +0100)]
properly handle return codes
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Sat, 28 Mar 2015 06:59:38 +0000 (07:59 +0100)]
properly handle return code of pipe() syscall
Signed-off-by: John Crispin <blogic@openwrt.org>
Christian Mehlis [Thu, 26 Mar 2015 13:51:21 +0000 (14:51 +0100)]
syslog: use appropriate levels for logging
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Jo-Philipp Wich [Thu, 26 Feb 2015 21:17:31 +0000 (22:17 +0100)]
kmodloader: initialize module folders in insmod
Fixes a segmentation fault in 'insmod' operation mode, due to uninitialized
path list.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Jo-Philipp Wich [Wed, 25 Feb 2015 20:48:05 +0000 (21:48 +0100)]
kmodloader: convert to ulog() api
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Jo-Philipp Wich [Tue, 24 Feb 2015 22:55:09 +0000 (23:55 +0100)]
kmodloader: search kmods relative to LD_LIBRARY_PATH
When LD_LIBRARY_PATH is set, then scan for kmods in each directory pointed to
by it. This is mainly useful for early boot invocations of kmodloader, e.g.
during the extroot setup phase.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
John Crispin [Fri, 3 Oct 2014 15:54:19 +0000 (17:54 +0200)]
hw_detect replaces this old code
Signed-off-by: John Crispin <blogic@openwrt.org>
Michel Stam [Thu, 2 Oct 2014 11:42:45 +0000 (11:42 +0000)]
Use different loglevels
Ubox logs various messages during OpenWRT boot which are not
very interesting, such as the number of iterations made. This
fix implements several loglevels for debug/info/error so that
more useful messages are shown.
Signed-off-by: Michel Stam <m.stam@fugro.nl>
John Crispin [Tue, 16 Sep 2014 12:20:30 +0000 (14:20 +0200)]
RFC 3164 compliant remote logging
When logread daemon send a syslog message to another host, time, severity and facility are cut off.
The message contains only text. This patch adds time, severity and facility in the message as described in the RFC 3164.
Signed-off-by: Belkov Max <belkov-max@mail.ru>
Alexandru Ardelean [Fri, 8 Aug 2014 07:48:52 +0000 (07:48 +0000)]
ubox: exit(1) in logd if registering log object with ubus fails
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Luka Perkov [Fri, 27 Jun 2014 14:23:43 +0000 (14:23 +0000)]
validate: return error on failed validation
In the procd script (/lib/functions/procd.sh) uci_validate_section is in charge
of validating the uci config files. The uci_validate_section function checks
return code of validate_data tool; without this change in case of invalid
config values the function is not able to catch errors.
Signed-off-by: Luka Perkov <luka@openwrt.org>
Luka Perkov [Fri, 27 Jun 2014 08:09:04 +0000 (08:09 +0000)]
validate: add missing yes/no boolean values
Signed-off-by: Luka Perkov <luka@openwrt.org>
Luka Perkov [Fri, 27 Jun 2014 08:09:03 +0000 (08:09 +0000)]
validate: add valid bool types enabled/disabled
They are already supported in config_get_bool function found in OpenWrt
base-package.
Signed-off-by: Luka Perkov <luka@openwrt.org>
Luka Perkov [Fri, 27 Jun 2014 08:09:02 +0000 (08:09 +0000)]
validate: fix indentation
Signed-off-by: Luka Perkov <luka@openwrt.org>
Felix Fietkau [Wed, 28 May 2014 21:28:28 +0000 (23:28 +0200)]
kmodloader: force size argument for syscall to unsigned long to fix issues with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Felix Fietkau [Sun, 25 May 2014 20:00:58 +0000 (22:00 +0200)]
ubox: only link libraries that are actually used
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
John Crispin [Thu, 27 Mar 2014 12:04:24 +0000 (12:04 +0000)]
log: remove superflous client_close call
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 26 Mar 2014 14:48:24 +0000 (14:48 +0000)]
mount_root/block: these tools were moved to the fstools repo
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Tue, 18 Mar 2014 06:58:38 +0000 (06:58 +0000)]
logd: fix time passed via unix fd
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 12 Mar 2014 07:00:11 +0000 (07:00 +0000)]
logd: fix internal buffer size
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 12 Mar 2014 04:01:42 +0000 (04:01 +0000)]
logd: fix pipe close
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 26 Feb 2014 02:57:30 +0000 (02:57 +0000)]
logd: transport log data via the new ubus fd api
this fixes the size limitation patch.
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 26 Feb 2014 06:02:07 +0000 (06:02 +0000)]
kmodloader: fix insmod when the passed parameter is a valid path
Signed-off-by: John Crispin <blogic@openwrt.org>
Jo-Philipp Wich [Fri, 21 Feb 2014 15:29:11 +0000 (16:29 +0100)]
validate: range and base arguments for numeric types, new types hexstring, regexp and uci
- make uinteger and integer types more strict, they will not accept
leading spaces or plus signs anymore
- add optional base argument to uinteger and integer data types, e.g.
integer(16) will accept -af or 0xaf, a base of 0 (the default) will
use the underlying heuristics of strtol() / strtoul()
- add optional min and max options to string() datatype, e.g.
string(3) only accepts strings longer than 3 chars, string(8, 63)
will accept strings between 8 and 63 characters in length
- add hexstring([minlen [, maxlen]]) type which will accept
long hex encoded strings whose length must be a multiple of 2
- add regexp(pattern) type which applies an extended POSIX regular
expression on the value to test. The given pattern is implicitely
anchored, e.g. regexp("[a-z]+") will match /^[a-z]+$/
- add uci(package, {@type|name}[, option]) type which tests the input
against selected uci values, e.g.
* uci("network", "@interface") would allow values that match
the name of any section of type "interface" in /e/c/network
* uci("network", "@interface", "ifname") would allow any value
that matches one of the ifnames in any section of type
interface in /e/c/network
* uci("system", "ntp", "server") would allow any value that
matches on of the servers in the "server" option of the "ntp"
section in /e/c/system
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Jo-Philipp Wich [Wed, 4 Dec 2013 16:34:43 +0000 (16:34 +0000)]
block: add more diagnostic messages
Jo-Philipp Wich [Wed, 4 Dec 2013 16:34:23 +0000 (16:34 +0000)]
mount_root: add more diagnostic messages
Jo-Philipp Wich [Tue, 3 Dec 2013 18:14:48 +0000 (18:14 +0000)]
mount_root: try both $prefix/sbin/block and /sbin/block, fixes extroot with builtin block-mount
John Crispin [Wed, 22 Jan 2014 17:57:09 +0000 (17:57 +0000)]
kmodloader: allow /etc/modules.d/ files to pass options
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 22 Jan 2014 16:35:21 +0000 (16:35 +0000)]
ubox: make logd use new ubus autoconnect
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 22 Jan 2014 13:57:07 +0000 (13:57 +0000)]
logd: revert the log size changes
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Tue, 21 Jan 2014 13:00:19 +0000 (13:00 +0000)]
logd: prevent the buffer from being bigger than the maximum ubus size
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Sun, 19 Jan 2014 18:32:58 +0000 (18:32 +0000)]
logd: allow setting the buffer size from the command line
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Thu, 16 Jan 2014 00:29:16 +0000 (00:29 +0000)]
kmodloader: fix elf header parsing on 64bit machines
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Wed, 15 Jan 2014 22:23:04 +0000 (22:23 +0000)]
block: remove duplicate block device wildcard
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Sun, 12 Jan 2014 13:07:18 +0000 (14:07 +0100)]
fix bogus kmodloader warning
https://dev.openwrt.org/ticket/14659
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Mon, 9 Dec 2013 18:12:15 +0000 (19:12 +0100)]
logread: fix initial connect. we really need a better reconnect logic
Signed-off-by: John Crispin <blogic@openwrt.org>
Jo-Philipp Wich [Sat, 30 Nov 2013 17:35:08 +0000 (17:35 +0000)]
validate: properly deal with datatype expressions containing escaped colons
Jo-Philipp Wich [Sat, 30 Nov 2013 16:47:08 +0000 (16:47 +0000)]
validate: fix length calculation of string literals and store value type for literal comparisations
Jo-Philipp Wich [Sat, 30 Nov 2013 14:53:39 +0000 (14:53 +0000)]
validate: fix return type of dt_parse() call
Jo-Philipp Wich [Thu, 28 Nov 2013 21:20:08 +0000 (21:20 +0000)]
validate: support uci lists in cli client and use dt_parse() return value to decide whether an option should be handled as bool
Jo-Philipp Wich [Thu, 28 Nov 2013 21:19:34 +0000 (21:19 +0000)]
validate: change dt_parse() to return an enum indicating the kind of value that was matched (bool, number, string)
John Crispin [Wed, 20 Nov 2013 22:54:14 +0000 (23:54 +0100)]
add a c version of the current uci_valisate call to the cli
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Tue, 19 Nov 2013 19:58:38 +0000 (20:58 +0100)]
make use of the md5.c inside libubox
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Sat, 16 Nov 2013 19:55:14 +0000 (20:55 +0100)]
revert
2fdd374f4214129d93f10b7001adece9239752a2
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Thu, 14 Nov 2013 12:48:48 +0000 (13:48 +0100)]
update gitignore
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Thu, 14 Nov 2013 12:47:18 +0000 (13:47 +0100)]
add log daemon
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Thu, 14 Nov 2013 12:43:19 +0000 (13:43 +0100)]
add validation code
Signed-off-by: John Crispin <blogic@openwrt.org>
John Crispin [Fri, 8 Nov 2013 21:59:58 +0000 (22:59 +0100)]
kmod-loader: fix module options support when using modprobe
Signed-off-by: John Crispin <blogic@openwrt.org>
Jo-Philipp Wich [Wed, 6 Nov 2013 12:54:16 +0000 (12:54 +0000)]
block: support extroot and overlay mounts by device
Jo-Philipp Wich [Wed, 6 Nov 2013 12:48:01 +0000 (12:48 +0000)]
block: fix find_block_info() by label
Nathan Hintz [Sat, 2 Nov 2013 17:31:41 +0000 (17:31 +0000)]
support specifying swap priority from the command line
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Luka Perkov [Tue, 9 Jul 2013 23:50:48 +0000 (01:50 +0200)]
close file pointer before exiting function
Signed-off-by: Luka Perkov <luka@openwrt.org>
Luka Perkov [Thu, 24 Oct 2013 00:28:20 +0000 (02:28 +0200)]
fix typo
Signed-off-by: Luka Perkov <luka@openwrt.org>
John Crispin [Mon, 7 Oct 2013 15:46:45 +0000 (17:46 +0200)]
add support for patched rootfs
Signed-off-by: John Crispin <blogic@openwrt.org>
Jo-Philipp Wich [Mon, 14 Oct 2013 14:13:40 +0000 (14:13 +0000)]
kmodloader: respect global directory prefix in scan_module_folder()
Jo-Philipp Wich [Sat, 28 Sep 2013 16:32:29 +0000 (16:32 +0000)]
kmodloader: use the name of the found module struct for modinfo
The module .ko file might be called differently than the name used
by the kernel internally, e.g. "nls_iso8859-1.ko" is called
"nls_iso8859_1" in lsmmod. The print_modinfo() procedure expects the
filename spelling in order to successfully resolve the full module path.
After this change, "modinfo" supports printing module info even if the
user gives the kernel internal spelling instead of the file name one,
so that e.g. "modinfo "nls_iso8859_1" and "modinfo nls_iso8859-1.ko" will
both succeed.