imx6: split up DEVICE_TITLE
[oweals/openwrt.git] / target / linux / ipq806x /
2019-09-05 Rafał Miłeckitreewide: use new procd sysupgrade $UPGRADE_BACKUP...
2019-09-05 Rafał Miłeckitreewide: when copying a backup file always specify...
2019-09-05 Rafał Miłeckitreewide: don't hardcode "sysupgrade.tgz" file name
2019-08-31 Adrian Schmutzleripq806x: Replace backticks by $(...)
2019-08-22 Paul Spoorenipqx0xx: add Generic subtarget
2019-08-17 Chuanhong Guotreewide: sync bootcount scripts across targets
2019-08-14 Adrian Schmutzlertreewide: convert WiFi caldata size and offset to hexad...
2019-08-14 Adrian Schmutzlertreewide: convert MAC address location offsets to hexad...
2019-08-02 Moritz Warningipq806x: split up DEVICE_TITLE
2019-07-22 Rafał Miłeckitreewide: sysupgrade: get rid of platform_nand_pre_upgr...
2019-07-17 Rafał Miłeckitreewide: sysupgrade: don't use $ARGV in platform_do_up...
2019-05-21 Koen Vandeputtekernel: bump 4.14 to 4.14.120
2019-05-18 Jeff Kletskymtd: base-files: Unify dual-firmware devices (Linksys)
2019-03-27 Koen Vandeputtekernel: bump 4.14 to 4.14.108
2019-03-18 Wang Xin-yu (王昕宇)ipq806x: Enlarge R7500v2 flash - use netgear partition
2019-02-28 INAGAKI Hiroshiipq806x: fix LED configuration for NEC Aterm WG2600HP
2019-02-22 Koen Vandeputtekernel: bump 4.14 to 4.14.102
2019-02-14 Roman Glovaipq8064: Enabling sata port ipq8064 based devices
2019-02-14 Koen Vandeputtekernel: bump 4.14 to 4.14.99
2019-01-24 Petr Štetiaripq806x: dts: Unify naming of gpio-led nodes
2019-01-24 Petr Štetiaripq806x: dts: Unify naming of gpio-keys nodes
2019-01-07 Koen Vandeputtekernel: bump 4.14 to 4.14.91
2019-01-01 INAGAKI Hiroshiipq806x: add support for Buffalo WXR-2533DHP
2019-01-01 INAGAKI Hiroshiipq806x: add ramdisk feature
2018-12-16 Stefan Lippers-Hol... ipq806x: drop kernel/ rootfs partition images for the...
2018-12-15 Christian Lamparteripq806x: add ath10k calibration data MAC addresses...
2018-12-12 INAGAKI Hiroshiipq806x: fix and cleanup dts for NEC WG2600HP
2018-12-10 Koen Vandeputtekernel: bump 4.14 to 4.14.86
2018-12-06 Petr Štetiarapm821xx, ath79, ipq40xx, ipq806x, lantiq, ramips:...
2018-12-06 Ram Chandra Jangiripq806x: dts: Add support for RGMII RX and TX clock...
2018-11-26 Ram Chandra Jangiripq806x: Add support for IPQ8064 AP161 board
2018-11-26 Ram Chandra Jangiripq8064: pinctrl: Fixed missing RGMII pincontrol defini...
2018-11-26 Ben Greearhotplug: Allow configuring radio name.
2018-11-14 Koen Vandeputtekernel: bump 4.14 to 4.14.81
2018-11-05 Koen Vandeputtekernel: bump 4.14 to 4.14.79
2018-10-19 Koen Vandeputtekernel: bump 4.14 to 4.14.77
2018-10-16 Mathias Kresintreewide: use wpad-basic for not small flash targets
2018-10-04 Koen Vandeputtekernel: bump 4.14 to 4.14.74
2018-09-29 Christian Lampartertreewide: replace 'linux, stdout-path' with 'stdout...
2018-09-26 Hauke Mehrtensmac80211: fix selecting of ath10k -ct firmware
2018-09-26 John Crispinmac80211: make ath10k-ct the default ath10k
2018-09-26 Koen Vandeputtekernel: bump 4.14 to 4.14.72
2018-08-28 Koen Vandeputtekernel: bump 4.14 to 4.14.67
2018-08-28 David Bauerbuild: add mkrasimage
2018-08-27 Paul Wassitreewide: fix some cosmetic glitches in dts files
2018-08-16 Mathias Kresintreewide: fix upgrade led handling
2018-08-16 Mathias Kresintreewide: consolidate upgrade state set
2018-07-19 Rosen Penevipq806x: dts: Remove device_type = "ethernet-phy"
2018-07-03 Aleksandr V. Piskunovipq806x: fix numbering for Netgear R7800 LAN ports
2018-06-28 Mathias Kresinipq806x: drop gpio export patch
2018-06-28 Stefan Lippers-Hol... ipq806x: switch the NBG6817 wlan LEDs from amber to...
2018-06-27 Hannu Nymanipq806x: remove "firmware" partition definition from...
2018-06-26 Kevin Darbyshire... kernel: bump 4.14 to 4.14.51
2018-06-19 INAGAKI Hiroshiipq806x: add support for NEC Aterm WG2600HP
2018-06-18 John Crispinipq806x: D7800 only has a single sata port
2018-06-07 Hannu Nymanipq806x: Enlarge R7800 flash - use netgear partition
2018-06-07 Rosen Penevipq806x: Limit NR_CPUS to 2
2018-05-24 Koen Vandeputtekernel: bump 4.14 to 4.14.43
2018-05-22 Stefan Lippers-Hol... ipq806x: drop "mtd: nand: add Winbond manufacturer...
2018-05-22 Stefan Lippers-Hol... ipq806x: drop linux 4.9 support
2018-05-22 Stefan Lippers-Hol... ipq806x: switch to linux 4.14
2018-05-22 Pavel Kubelunipq806x: remove spi-nor from r7800 dts
2018-05-22 Pavel Kubelunipq806x: remove rpm pinctrl from board dts
2018-05-22 Pavel Kubelunipq806x: fix EA8500 switch control
2018-05-22 Pavel Kubelunipq806x: move mmc specific nodes into v1.0 dtsi
2018-05-22 Pavel Kubelunipq806x: fix pcie tx termination offset
2018-05-22 Pavel Kubelunipq806x: apply updated USB PHY settings to v2.0 SoC
2018-05-22 Pavel Kubelunipq806x: reference ipq8065 as ipq8064 v3.0
2018-05-22 Pavel Kubelunipq806x: move mass market ipq8064 to v2 dtsi
2018-05-22 Pavel Kubelunipq806x: introduce ipq8064 SoC v2 dtsi
2018-05-22 Marc Benoitkernel: iqp806x low latency kernel does not boot
2018-05-22 Stefan Lippers-Hol... ipq806x: define KERNEL_SIZE in KB instead of byte for...
2018-05-22 Stefan Lippers-Hol... ipq806x: increase kernel partition size for the Netgear...
2018-05-22 Stefan Lippers-Hol... ipq806x: increase kernel partition size for the Netgear...
2018-05-22 Stefan Lippers-Hol... ipq806x: increase kernel partition size for the Netgear...
2018-05-22 Stefan Lippers-Hol... ipq806x: increase kernel partition size for the TP...
2018-05-22 Stefan Lippers-Hol... ipq806x: increase kernel partition size for the TP...
2018-05-22 Stefan Lippers-Hol... ipq806x: increase kernel partition size for the Netgear...
2018-05-22 Ram Chandra Jangiripq806x: cleanup kernel config
2018-05-22 Ram Chandra Jangiripq806x: add kernel 4.14 support
2018-04-26 Kevin Darbyshire... kernel: bump 4.9 to 4.9.96
2018-04-20 Mathias Kresinbuild: consolidate fake uImage header build commands
2018-04-09 Rafał Miłeckiipq806x: replace linux,part-probe with a proper partiti...
2018-03-15 Christian Mehlisipq806x: add support for Compex WPQ864
2018-03-14 Mathias Kresinipq40xx/ipq806x: move qcom-dwc3 usb driver to generic
2018-03-14 John Crispinipq806x: drop ipq40xx support
2018-03-03 Magnus Krokenkernel: bump 4.9 to 4.9.85
2018-02-14 Dongming Hanipq806x: add support for GL.iNet GL-B1300
2018-02-13 Stefan Lippers-Hol... ipq806x: switch to full dual-boot for the nbg6817 sysup...
2018-02-13 Stefan Lippers-Hol... ipq806x: request the first free loop device dynamically...
2018-02-13 Stefan Lippers-Hol... ipq806x: use absolute the device path in $kernel for...
2018-02-13 Luis Aranedaipq806x: support new location of USB PHY kernel module
2018-02-11 Sven Eckelmannipq-wifi: drop OpenMesh A42 board-2.bin
2018-02-11 David Baueripq806x: mark AVM FB4040 switchport as untagged
2018-01-20 Hauke Mehrtensipq806x: make patches apply again
2018-01-20 Kevin Darbyshire... kernel: bump 4.9 to 4.9.77
2018-01-18 Christian Lamparteripq806x: remove merged ipq4019 patch
2018-01-18 Christian Lamparteripq806x: remove dependency on non-existent kmod
2018-01-18 Christian Lamparteripq-wifi: align AVM FRITZ!Box 4040's board-2.bin package
2018-01-18 Christian Lamparteripq806x: overhaul AVM FRITZ!box 4040 device-tree file
next