Reserve the top 16 flag bits for architecture-specific use
[oweals/u-boot.git] / arch /
2015-08-05 Simon Glassx86: Use CR0 constants in CPU init
2015-08-05 Simon Glassx86: Add various minor tidy-ups to the 32-bit startup...
2015-08-05 Bin Mengx86: bayleybay: Configure PCI IRQ
2015-08-05 Bin Mengx86: Add Intel Bayley Bay board support
2015-08-05 Bin Mengx86: Add microcode for BayTrail-I B0 stepping
2015-08-05 Bin Mengx86: baytrail: Update UPD setting for FSP Gold4 release
2015-08-05 Bin Mengx86: qemu: Add MP initialization
2015-08-05 Miao Yanx86: Add a 'pause' instruction in __udelay() for QEMU...
2015-08-04 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-fsl...
2015-08-03 Nikhil Badolaarmv8/lsch3/config: Define USB XHCI controller base...
2015-08-03 Nikhil Badolaarmv8/lsch3/config: Define CONFIG_SYS_CACHELINE_SIZE...
2015-08-03 Wang Dongshengarmv7/ls102xa: Fix non-boot cpus cannot correctly fall...
2015-08-02 Tom RiniMerge branch 'master' of git://denx.de/git/u-boot-imx
2015-08-02 Peng Fanimx: mx6ul_14x14_evk add basic board support
2015-08-02 Peng Fanimx:mx6ul add dram spl configuration and header file
2015-08-02 Peng Fanimx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL
2015-08-02 Peng Fanimx: mx6ul update soc related settings
2015-08-02 Peng Fanimx: mx6ul select SYS_L2CACHE_OFF
2015-08-02 Peng Fanimx:mx6ul add clock support
2015-08-02 Peng Fanimx-common: timer: add i.MX6UL support
2015-08-02 Peng Fanimx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL
2015-08-02 Peng Fanimx: mx6ul: Update imx registers head file
2015-08-02 Peng Fanimx: mx6ul: Add pins IOMUX head file
2015-08-02 Peng Fanimx: mx6ul: Add i.MX6UL CPU type
2015-08-02 Nikita Kiryanovarm: mx6: kconfig: don't select CPU_V7 per board
2015-08-02 Nikita Kiryanovarm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6
2015-08-02 Peng Fanimx: mx6qp Enable PRG clock for IPU
2015-08-02 Ye.Liimx: mx6: hab : Remove the cache issue workaroud in...
2015-08-02 Peng Fanimx: mx6: ccm: Change the clock settings for i.MX6QP
2015-08-02 Peng Fanimx: add cpu type for i.MX6QP/DP
2015-08-01 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
2015-08-01 Tom RiniMerge git://git.denx.de/u-boot-x86
2015-07-31 Shaohui Xiepowerpc/t4240: update serdes table
2015-07-31 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT-Copy Boot Script on RAM
2015-07-31 Aneesh Bansalpowerpc/mpc85xx: SECURE BOOT- NAND secure boot target...
2015-07-30 Siva Durga Prasad... armv8: caches: Added routine to set non cacheable region
2015-07-29 Tom RiniMerge branch 'master' of git://git.denx.de/u-boot-tegra
2015-07-28 Nikhil Badolapowerpc/mpc85xx: Correct CONFIG_USB_MAX_CONTROLLER_COUN...
2015-07-28 Shengzhou Liupowerpc/t1024: update fman liodn for mac1
2015-07-28 gaurav ranapowerpc/T104xD4: Add Secure boot support for T104xD4RDB...
2015-07-28 Tom WarrenT210: Add support for 64-bit T210-based P2571 board
2015-07-28 Tom WarrenP2571: dts: Add DT file for Tegra210 P2571 board
2015-07-28 Tom WarrenARM: Tegra210: Add support to common Tegra source/confi...
2015-07-28 Tom WarrenARM: Tegra210: Add SoC code/include files for T210
2015-07-28 Tom WarrenTegra: Rework KConfig options to allow 64-bit builds...
2015-07-28 Tom WarrenTegra210: Fix 64-bit build warning about save_boot_para...
2015-07-28 Thierry RedingARM: tegra: Initialize timer earlier
2015-07-28 Thierry RedingARM: tegra: Use standard cache enable for 64-bit
2015-07-28 Thierry RedingARM: tegra: Restrict usable RAM to 32-bit on 64-bit...
2015-07-28 Thierry Redingarmv8/cache: Fix page table creation
2015-07-28 Bin Mengx86: Reserve PCIe ECAM address range in the E820 table
2015-07-28 Bin Mengx86: qemu: Turn on PCIe ECAM address range decoding...
2015-07-28 Bin Mengx86: qemu: Enable writing MP table
2015-07-28 Bin Mengx86: Allow cpu-x86 driver to be probed for UP
2015-07-28 Bin Mengx86: qemu: Enable I/O APIC chip select on PIIX3
2015-07-28 Bin Mengx86: mpspec: Move writing ISA interrupt entry after PCI
2015-07-28 Bin Mengx86: mpspec: Allow platform to determine how PIRQ is...
2015-07-28 Bin Mengx86: Convert to use driver model pci on queensbay/crownbay
2015-07-28 Bin Mengx86: pci: Do not assign irq 0 to pci device
2015-07-28 Bin Mengx86: pci: Assign pci irqs to all functions
2015-07-28 Bin Mengx86: Enable DM RTC support for all x86 boards
2015-07-28 Bin Mengx86: Change pci option rom area MTRR setting to cacheable
2015-07-28 Bin Mengx86: Simplify architecture defined exception handling...
2015-07-28 Bin Mengx86: Display correct CS/EIP/EFLAGS when there is an...
2015-07-28 Tom RiniMerge branch 'zynq' of git://denx.de/git/u-boot-microblaze
2015-07-28 Michal SimekARM: zynqmp: Wire up SATA for the board
2015-07-28 Michal SimekARM: zynqmp: Wire up ethernet controllers
2015-07-28 Michal SimekARM: zynq: Add support for zc770-xm011
2015-07-28 Michal SimekARM: zynq: DT: Update zc770 dtses
2015-07-28 Michal SimekARM: zynq: DT: Add zc702 pushbuttons to DT as gpio...
2015-07-28 Michal SimekARM: zynq: DT: Add missing interrupt for L2 pl310
2015-07-28 Michal SimekARM: zynq: DT: Get rid of ps-clk-frequency
2015-07-28 Michal SimekARM: zynq: DT: Update years in copyright
2015-07-28 Michal SimekARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel
2015-07-28 Michal SimekARM: zynq: DT: Add reference to bus node
2015-07-28 Michal SimekARM: zynq: DT: Add pinctrl node
2015-07-28 Michal SimekARM: zynq: DT: Cleanup address-cells and size-cells
2015-07-28 Michal SimekARM: zynq: DT: Clean up timer device tree nodes
2015-07-28 Michal SimekARM: zynq: DT: Use the zynq binding with macb
2015-07-28 Michal SimekARM: zynq: DT: Fix GEM register area size
2015-07-28 Michal Simekspi: Fix zynq SPI binding
2015-07-28 Michal SimekARM: zynq: DT: Remove 222 MHz OPP
2015-07-28 Michal SimekARM: zynq: DT: Migrate UART to Cadence binding
2015-07-28 Michal SimekARM: zynq: DT: Add a fixed regulator for CPU voltage
2015-07-28 Michal SimekARM: zynq: DT: Add missing nodes to DTSI
2015-07-28 Michal SimekARM: zynq: DT: Use the right names for nodes
2015-07-28 Michal Simekzynqmp: Add support for IP detection via SLCR
2015-07-28 Michal Simekzynqmp: mp: Simplify set_r5_start handling
2015-07-28 Siva Durga Prasad... zynqmp: Define ep config for ZynqMP
2015-07-28 Siva Durga Prasad... zynqmp: Kconfig: Move zynqmp Kconfig
2015-07-27 Thierry Redingarm64: Handle arbitrary CONFIG_SYS_MALLOC_F_LEN values
2015-07-27 Thierry RedingARM: tegra: Build warning fixes for 64-bit
2015-07-27 Simon Glasstegra124: Implement spl_was_boot_source()
2015-07-27 Antonio Borneostm32f4: add cpu clock option for 180 MHz
2015-07-27 Antonio Borneostm32f429: pass the device unique ID in DTB
2015-07-27 Masahiro YamadaKill unneeded #include <linux/kconfig.h>
2015-07-27 Paul Kocialkowskiam33xx: Unused get_board_rev function removal
2015-07-27 Paul Kocialkowskiomap3: CONFIG_REVISION_TAG ifdef check for get_board_rev
2015-07-27 Paul Kocialkowskiomap5: Definitions for SYS_BOOT-based fallback boot...
2015-07-27 Paul Kocialkowskiomap4: Definitions for SYS_BOOT-based fallback boot...
next