help
Use Freescale common code for Local Access Window
-config SECURE_BOOT
- bool "Secure Boot"
+config NXP_ESBC
+ bool "NXP_ESBC"
help
Enable Freescale Secure Boot feature. Normally selected
by defconfig. If unsure, do not change.
#ifdef CONFIG_FSL_CAAM
#include <fsl_sec.h>
#endif
-#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET)
+#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_CORENET)
#include <asm/fsl_pamu.h>
#include <fsl_secboot_err.h>
#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
-#if defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT)
struct law_entry law;
#endif
#ifdef CONFIG_ARCH_MPC8548
disable_tlb(14);
disable_tlb(15);
-#if defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT)
/* Disable the LAW created for NOR flash by the PBI commands */
law = find_law(CONFIG_SYS_PBI_FLASH_BASE);
if (law.index != -1)
fman_enet_init();
#endif
-#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_CORENET)
+#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_CORENET)
if (pamu_init() < 0)
fsl_secboot_handle_error(ERROR_ESBC_PAMU_INIT);
#endif
#endif
#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && \
- !defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+ !defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
#define NOR_BOOT
#endif
#endif
-#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500MC) && \
+#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_E500MC) && \
!defined(CONFIG_E6500)
/* ISBC uses L2 as stack.
* Disable L2 cache here so that u-boot can enable it later
blt 1b
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL) && \
- !defined(CONFIG_SECURE_BOOT)
+ !defined(CONFIG_NXP_ESBC)
/*
* TLB entry for debuggging in AS1
* Create temporary TLB entry in AS0 to handle debug exception
0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
-#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
+#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_NXP_ESBC)
/* create a temp mapping in AS = 1 for Flash mapping
* created by PBL for ISBC code
*/
* and for targets with CONFIG_SPL like T1, T2, T4, only for
* u-boot-spl i.e. CONFIG_SPL_BUILD
*/
-#elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_SECURE_BOOT) && \
+#elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_NXP_ESBC) && \
(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
/* create a temp mapping in AS = 1 for mapping CONFIG_SYS_MONITOR_BASE
* to L3 Address configured by PBL for ISBC code
#error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes
#endif
-#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_E500) && \
+#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_E500) && \
!defined(CONFIG_E500MC)
/* ISBC (Boot ROM) creates a LAW 0 entry for non PBL platforms,
* which is not disabled before transferring the control to uboot.
disable_law(0);
#endif
-#if !defined(CONFIG_SECURE_BOOT)
+#if !defined(CONFIG_NXP_ESBC)
/*
* if any non DDR LAWs has been created earlier, remove them before
* LAW table is parsed.
#define __FSL_SECURE_BOOT_H
#include <asm/config_mpc85xx.h>
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#if defined(CONFIG_FSL_CORENET)
#define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000
#elif defined(CONFIG_TARGET_BSC9132QDS)
*/
#define CONFIG_FSL_ISBC_KEY_EXT
#endif
-#endif /* #ifdef CONFIG_SECURE_BOOT */
+#endif /* #ifdef CONFIG_NXP_ESBC */
#ifdef CONFIG_CHAIN_OF_TRUST
#ifdef CONFIG_SPL_BUILD
/* *I*** - Covers boot page */
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
-#if !defined(CONFIG_SECURE_BOOT)
+#if !defined(CONFIG_NXP_ESBC)
/*
* *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
* SRAM is at 0xfff00000, it covered the 0xfffff000.
/* TLB 1 */
/* *I*** - Covers boot page */
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) && \
- !defined(CONFIG_SECURE_BOOT)
+ !defined(CONFIG_NXP_ESBC)
/*
* *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the
* SRAM is at 0xfffc0000, it covered the 0xfffff000.
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_256K, 1),
-#elif defined(CONFIG_SECURE_BOOT) && defined(CONFIG_SPL_BUILD)
+#elif defined(CONFIG_NXP_ESBC) && defined(CONFIG_SPL_BUILD)
/*
* *I*G - L3SRAM. When L3 is used as 256K SRAM, in case of Secure Boot
* the physical address of the SRAM is at 0xbffc0000,
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_B4860QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x8FF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x8FF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_C29XPCIE=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_C29XPCIE=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PA=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P1010RDB_PB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P2041RDB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P3041DS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P3041DS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P4080DS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P5020DS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P5020DS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P5040DS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P5040DS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1023RDB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1024QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1024QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1024RDB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1040D4RDB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1040QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1040RDB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042D4RDB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_SYS_TEXT_BASE=0x30001000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T1042RDB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080QDS=y
CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T2080RDB=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T4160QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T4240QDS=y
# CONFIG_SYS_MALLOC_F is not set
NOR boot
!defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SPL)
NOR boot Secure
- !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
+ !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_NXP_ESBC)
RAMBOOT(SD, SPI & NAND boot)
defined(CONFIG_SYS_RAMBOOT)
RAMBOOT Secure (SD, SPI & NAND)
- defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
+ defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_NXP_ESBC)
NAND SPL BOOT
defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_NAND_SPL)
1) TLB entry to overcome e500 v1/v2 debug restriction
Location : Label "_start_e500"
TLB Entry : CONFIG_SYS_PPC_E500_DEBUG_TLB
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_NXP_ESBC)
EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_PBI_FLASH_WINDOW
Properties : 1M, AS1, I, G, IPROT
#else
2) TLB entry for working in AS1
Location : Label "create_init_ram_area"
TLB Entry : 15
-#if defined(CONFIG_SECURE_BOOT)
+#if defined(CONFIG_NXP_ESBC)
EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_PBI_FLASH_WINDOW
Properties : 1M, AS1, I, G, IPROT
#else
#endif
#ifdef CONFIG_SPIFLASH
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_RAMBOOT_SPIFLASH
#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
#else
#endif
#ifdef CONFIG_NAND
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#ifdef CONFIG_RAMBOOT_PBL
-#ifndef CONFIG_SECURE_BOOT
+#ifndef CONFIG_NXP_ESBC
#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
#else
#define CONFIG_SYS_FSL_PBL_PBI \
#define BOOT_PAGE_OFFSET 0x27000
#ifdef CONFIG_NAND
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
/*
* HDR would be appended at end of image and copied to DDR along
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_OFFSET (512 * 0x800)
#elif defined(CONFIG_NAND)
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_RAMBOOT_NAND
#define CONFIG_BOOTSCRIPT_COPY_RAM
#endif
#include "../board/freescale/common/ics307_clk.h"
#ifdef CONFIG_RAMBOOT_PBL
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#ifdef CONFIG_NAND