"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \
"sf read 0x80100000 0xE00000 0x100000;" \
"fsl_mc start mc 0x80000000 0x80100000\0" \
- "mcmemsize=0x70000000 \0"
-#define QSPI_NOR_BOOTCOMMAND "sf probe 0:0;" \
- "sf read 0x80001000 0xd00000 0x100000;"\
- " fsl_mc lazyapply dpl 0x80001000 &&" \
- " sf read $kernel_load $kernel_start" \
- " $kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
- " fsl_mc lazyapply dpl 0x80001000 &&" \
- " mmc read $kernel_load $kernel_start_sd" \
- " $kernel_size_sd && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \
- " cp.b $kernel_start $kernel_load" \
- " $kernel_size && bootm $kernel_load"
+ "mcmemsize=0x70000000 \0" \
+ "BOARD=ls1088aqds\0" \
+ "scriptaddr=0x80000000\0" \
+ "scripthdraddr=0x80080000\0" \
+ BOOTENV \
+ "boot_scripts=ls1088aqds_boot.scr\0" \
+ "boot_script_hdr=hdr_ls1088aqds_bs.out\0" \
+ "scan_dev_for_boot_part=" \
+ "part list ${devtype} ${devnum} devplist; " \
+ "env exists devplist || setenv devplist 1; " \
+ "for distro_bootpart in ${devplist}; do " \
+ "if fstype ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "bootfstype; then " \
+ "run scan_dev_for_boot; " \
+ "fi; " \
+ "done\0" \
+ "boot_a_script=" \
+ "load ${devtype} ${devnum}:${distro_bootpart} " \
+ "${scriptaddr} ${prefix}${script}; " \
+ "env exists secureboot && load ${devtype} " \
+ "${devnum}:${distro_bootpart} " \
+ "${scripthdraddr} ${prefix}${boot_script_hdr}; "\
+ "env exists secureboot " \
+ "&& esbc_validate ${scripthdraddr};" \
+ "source ${scriptaddr}\0" \
+ "qspi_bootcmd=echo Trying load from qspi..; " \
+ "sf probe 0:0; " \
+ "sf read 0x80001000 0xd00000 0x100000; " \
+ "fsl_mc lazyapply dpl 0x80001000 && " \
+ "sf read $kernel_load $kernel_start " \
+ "$kernel_size && bootm $kernel_load#$BOARD\0" \
+ "sd_bootcmd=echo Trying load from sd card..; " \
+ "mmcinfo;mmc read 0x80001000 0x6800 0x800; "\
+ "fsl_mc lazyapply dpl 0x80001000 && " \
+ "mmc read $kernel_load $kernel_start_sd " \
+ "$kernel_size_sd && bootm $kernel_load#$BOARD\0" \
+ "nor_bootcmd=echo Trying load from nor..; " \
+ "fsl_mc lazyapply dpl 0x580d00000 && " \
+ "cp.b $kernel_start $kernel_load " \
+ "$kernel_size && bootm $kernel_load#$BOARD\0"
#else
#if defined(CONFIG_QSPI_BOOT)
#undef CONFIG_EXTRA_ENV_SETTINGS
#endif /* CONFIG_TFABOOT */
#endif /* CONFIG_NXP_ESBC */
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
+ "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \
+ "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \
+ "env exists secureboot && esbc_halt;;"
+#endif
+
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_FSL_MEMAC
#define CONFIG_PHYLIB