pico-imx7d: Remove dead code for dm_video

Since convert dm_video, unused code introduced, so remove this

Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>

diff --git a/arch/arm/dts/imx7d-pico-u-boot.dtsi b/arch/arm/dts/imx7d-pico-u-boot.dtsi
index ef19de2b30885992ff76c710c4d2d1231c7df2f9..7307fbaf687e98f0a43e77947fa020ae9127e2fd 100644 (file)
--- a/arch/arm/dts/imx7d-pico-u-boot.dtsi
+++ b/arch/arm/dts/imx7d-pico-u-boot.dtsi
@@ -4,37 +4,6 @@
         usb0 = &usbotg1;
         display0 = &lcdif;
     };
-
-       backlight: backlight {
-               compatible = "pwm-backlight";
-               pinctrl-names = "default";
-               pinctrl-0 = <&pinctrl_backlight>;
-               pwms = <&pwm4 0 50000 0>;
-               brightness-levels = <0 36 72 108 144 180 216 255>;
-               default-brightness-level = <6>;
-               status = "okay";
-       };
-
-       reg_lcd_3v3: regulator-lcd-3v3 {
-               compatible = "regulator-fixed";
-               regulator-name = "lcd-3v3";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-
-       panel {
-               compatible = "vxt,vl050-8048nt-c01";
-               backlight = <&backlight>;
-               power-supply = <&reg_lcd_3v3>;
-
-               port {
-                       panel_in: endpoint {
-                               remote-endpoint = <&display_out>;
-                       };
-               };
-       };
 };
 
 &usbotg1 {
@@ -48,12 +17,6 @@
        display = <&display0>;
        u-boot,dm-pre-reloc;
 
-       port {
-               display_out: endpoint {
-                       remote-endpoint = <&panel_in>;
-               };
-       };
-
        display0: display {
                bits-per-pixel = <16>;
                bus-width = <24>;

diff --git a/board/technexion/pico-imx7d/pico-imx7d.c b/board/technexion/pico-imx7d/pico-imx7d.c
index 32b04b8fd6dcf4759322748bb5cac93416be0d84..bfa3c3c87f01be4cee5a06c42443a7bc3b87a2fe 100644 (file)
--- a/board/technexion/pico-imx7d/pico-imx7d.c
+++ b/board/technexion/pico-imx7d/pico-imx7d.c
@@ -33,13 +33,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define I2C_PAD_CTRL    (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
        PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
 
-
-#define LCD_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
-                        PAD_CTL_DSE_3P3V_49OHM)
-
-#define LCD_SYNC_PAD_CTRL    (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \
-                             PAD_CTL_DSE_3P3V_196OHM)
-
 #ifdef CONFIG_SYS_I2C_MXC
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 
@@ -224,13 +217,8 @@ int board_early_init_f(void)
 }
 
 #ifdef CONFIG_DM_VIDEO
-static iomux_v3_cfg_t const lcd_pads[] = {
-       MX7D_PAD_GPIO1_IO11__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
 void setup_lcd(void)
 {
-       imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
        gpio_request(IMX_GPIO_NR(1, 11), "lcd_brightness");
        gpio_request(IMX_GPIO_NR(1, 6), "lcd_enable");
        /* Set Brightness to high */