compatible = "mediatek,mt7623-topckgen";
reg = <0x10000000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
infracfg: syscon@10001000 {
compatible = "mediatek,mt7623-infracfg", "syscon";
reg = <0x10001000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
pericfg: syscon@10003000 {
compatible = "mediatek,mt7623-pericfg", "syscon";
reg = <0x10003000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
pinctrl: pinctrl@10005000 {
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
clocks = <&system_clk>;
clock-names = "system-clk";
- u-boot,dm-pre-reloc;
};
sysirq: interrupt-controller@10200100 {
compatible = "mediatek,mt7623-apmixedsys";
reg = <0x10209000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
gic: interrupt-controller@10211000 {
<&pericfg CLK_PERI_UART2>;
clock-names = "baud", "bus";
status = "disabled";
- u-boot,dm-pre-reloc;
};
uart3: serial@11005000 {
compatible = "mediatek,mt7629-infracfg", "syscon";
reg = <0x10000000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
pericfg: syscon@10002000 {
compatible = "mediatek,mt7629-pericfg", "syscon";
reg = <0x10002000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
timer0: timer@10004000 {
clocks = <&topckgen CLK_TOP_CLKXTAL_D4>,
<&topckgen CLK_TOP_10M_SEL>;
clock-names = "mux", "src";
- u-boot,dm-pre-reloc;
};
scpsys: scpsys@10006000 {
compatible = "mediatek,mt7629-mcucfg", "syscon";
reg = <0x10200000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
sysirq: interrupt-controller@10200a80 {
<&topckgen CLK_TOP_MEM_SEL>,
<&topckgen CLK_TOP_DMPLL>;
clock-names = "phy", "phy_mux", "mem", "mem_mux";
- u-boot,dm-pre-reloc;
};
apmixedsys: clock-controller@10209000 {
compatible = "mediatek,mt7629-apmixedsys";
reg = <0x10209000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
topckgen: clock-controller@10210000 {
compatible = "mediatek,mt7629-topckgen";
reg = <0x10210000 0x1000>;
#clock-cells = <1>;
- u-boot,dm-pre-reloc;
};
watchdog: watchdog@10212000 {
status = "disabled";
assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
- u-boot,dm-pre-reloc;
};
uart1: serial@11003000 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- u-boot,dm-pre-reloc;
};
ethsys: syscon@1b000000 {