ath79: add support for AVM FRITZ!WLAN Repeater DVB-C

[oweals/openwrt.git] / target / linux / ath79 / dts / qca9556_avm_fritzdvbc.dts

diff --git a/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts b/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts
new file mode 100644 (file)
index 0000000..28b19f9
--- /dev/null
+++ b/target/linux/ath79/dts/qca9556_avm_fritzdvbc.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9556_avm_fritz-repeater.dtsi"
+
+/ {
+       compatible = "avm,fritzdvbc", "qca,qca9556";
+       model = "AVM FRITZ!WLAN Repeater DVB-C";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       led_spi {
+               compatible = "spi-gpio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               sck-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               mosi-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               num-chipselects = <0>;
+
+               spi_gpio: led_gpio@0 {
+                       compatible = "fairchild,74hc595";
+                       reg = <0>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       registers-number = <2>;
+                       spi-max-frequency = <10000000>;
+
+                       gpio_latch_bit {
+                               gpio-hog;
+                               gpios = <16 GPIO_ACTIVE_HIGH>;
+                               output-high;
+                               line-name = "gpio-latch-bit";
+                       };
+               };
+       };
+
+       /*
+        * GPIO pins 100 or greater in the vendor GPL dump are redirected
+        * to the shift register.
+        * So OEM source pin 100 becomes 0 on the SR and so forth.
+        */
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "fritzdvbc:green:power";
+                       gpios = <&spi_gpio 6 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan {
+                       label = "fritzdvbc:green:wlan";
+                       gpios = <&spi_gpio 7 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               tv {
+                       label = "fritzdvbc:green:tv";
+                       gpios = <&spi_gpio 5 GPIO_ACTIVE_LOW>;
+               };
+
+               rssihigh {
+                       label = "fritzdvbc:green:rssihigh";
+                       gpios = <&spi_gpio 1 GPIO_ACTIVE_LOW>;
+               };
+
+               rssimediumhigh {
+                       label = "fritzdvbc:green:rssimediumhigh";
+                       gpios = <&spi_gpio 2 GPIO_ACTIVE_LOW>;
+               };
+
+               rssimedium {
+                       label = "fritzdvbc:green:rssimedium";
+                       gpios = <&spi_gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+               rssimediumlow {
+                       label = "fritzdvbc:green:rssimediumlow";
+                       gpios = <&spi_gpio 4 GPIO_ACTIVE_LOW>;
+               };
+
+               rssilow {
+                       label = "fritzdvbc:green:rssilow";
+                       gpios = <&spi_gpio 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&gpio {
+       reset-pcie-ep {
+               gpio-hog;
+               gpios = <109 GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "PCIE EP reset";
+       };
+
+       reset-pcie-bus {
+               gpio-hog;
+               gpios = <110 GPIO_ACTIVE_HIGH>;
+               output-high;
+               line-name = "PCIE Bus reset";
+       };
+};