+++ /dev/null
-$ *************************************<+>*************************************
-$ *****************************************************************************
-$ **
-$ ** File: dtcalc.msg
-$ **
-$ ** Project: CDE dtcalc
-$ **
-$ ** Description:
-$ ** -----------
-$ ** This file is the source for the message catalog for dtcalc
-$ ** Any additional messages are to be added to this file by hand,
-$ ** and the associated index number placed in the code.
-$ **
-$ *****************************************************************************
-$ **
-$ ** (c) Copyright 1993, 1994 Hewlett-Packard Company
-$ ** (c) Copyright 1993, 1994 International Business Machines Corp.
-$ ** (c) Copyright 1993, 1994 Sun Microsystems, Inc.
-$ ** (c) Copyright 1993, 1994 Novell, Inc.
-$ **
-$ **
-$ *****************************************************************************
-$ *************************************<+>*************************************
-
-$ *************************************<L>*************************************
-$ ** -----------------GENERAL LOCALIZATION NOTES SECTION---------------------
-$ * Comment lines begin with a $ except $set which indicates the start of a
-$ * new set.
-$ *
-$ * Do not delete any comments; you may add comments for your use.
-$ *
-$ ** ----------------GENERAL LOCALIZATION NOTES SECTION END------------------
-$ *************************************<L>*************************************
-
-$ *****************************************************************************
-$
-$ ***** NOTE FOR MESSAGE CATALOG TRANSLATORS *****
-$
-$ There may be three types of messages in this file:
-$
-$ 1. Messages that appear in dialogs or are displayed to the user.
-$
-$ These messages are the default and they should ALL BE LOCALIZED.
-$ Note that these messages do NOT have any identification (see the
-$ comments for type 2 and 3 below).
-$
-$ 2. Messages that only appear in the DT error log file ($HOME?.dt/errorlog).
-$
-$ The localization of these messages is OPTIONAL. These messages are
-$ identified by the following:
-$
-$ MESSAGES xx-yy WILL ONLY APPEAR IN THE DT ERRORLOG FILE
-$
-$ 3. Messages that should not be localized.
-$
-$ These messages are identified by the following:
-$
-$ DO NOT TRANSLATE or CHANGE or LOCALIZE MESSAGES xx-yy
-$
-$ ***** END (NOTE FOR MESSAGE CATALOG TRANSLATORS) *****
-$
-$ *****************************************************************************
-
-$set 2
-$ ****** Module: motif.c ****(developer comment only)********
-$
-$ Messages 1 - 4 are used by the "numeric base" option button. Bin is
-$ short for Binary, Oct is short for Octal, Dec is short for Decimal and
-$ Hex is short for Hexidecimal. Keep these to 3 to 4 characters!
-$
-1 Bin
-2 Okt
-3 Dec
-4 Hex
-$
-$ Messages 5 - 7 are used by the "display mode" option button. Eng is an
-$ abbreviation for Engineering, Fix is an abbreviation for Fixed, and
-$ Sci is an abbreviation for Scientific. Keep these to 3 characters.
-$
-5 Tek
-6 Nor
-7 Vet
-$
-$ NOTE: no message 8
-$
-$ Messages 9 - 11 refer to the three modes the Calculator can operate in.
-$ They are listed in the "Mode" option button.
-$
-9 Ekonomiskt
-10 Logiskt
-11 Vetenskapligt
-$
-$ Message 12 - This is the title to the Calculator.
-$
-12 Kalkylator
-$
-$ Messages 13 - 30 are the labels in the menubar pulldown menus and the
-$ mnemonic's (the letter that gets underlined for keyboard access) that
-$ go with them.
-$
-$ Message 13 is the mnemonic for Message 14
-$
-13 A
-14 Alternativ
-15 Minnen
-16 ASCII
-$
-$ Message 17 is the mnemonic for Message 18
-$
-17 H
-18 Hjälp
-$
-$ Message 19 is the mnemonic for Message 20
-$
-19 v
-20 Översikt
-$
-$ Message 21 is the mnemonic for Message 22
-$
-21 t
-22 Steg-för-steg-anvisningar
-$
-$ Message 23 is the mnemonic for Message 24
-$
-23 R
-24 Referens
-$
-$ Message 25 is the mnemonic for Message 26
-$
-25 O
-26 Objekthjälp
-$
-$ Message 27 is the mnemonic for Message 28
-$
-27 h
-28 Om hjälpfunktionen
-$
-$ Message 29 is the mnemonic for Message 30
-$
-29 K
-30 Om Kalkylator
-$
-$ Message 31 is an simple error message.
-$
-31 Visningsenheten kunde inte öppnas.\n
-$
-$ Messages 32 and 33 are button labels for dialog boxes.
-$
-32 Stäng
-33 Tillämpa
-$
-$ Message 34 is an simple error message.
-$
-34 Det gick inte att öppna sessionsfilen.
-$
-$ Message 35 - Gets put in the "Functions" popup when no functions have been
-$ defined by the users.
-$
-35 Det finns inga definierade funktioner.
-$
-$ Message 36 and 37 are titles to two types of dialogs.
-$
-36 Fortsätt
-37 Bekräfta
-$
-$ Message 38 and 39 are another label for the Help pulldown menu.
-$ Message 38 is the mnemonic for Message 39
-$
-38 I
-39 Innehållsförteckning
-$
-$ 40 - This is the mnemonic for the 'Memory Registers...' option on
-$ the Option menu pulldown. (message 15 set 2)
-$
-40 R
-$
-$ 41 - This is the mnemonic for the 'ASCII Convert...' option on the Option
-$ menu pulldown. (message 16 set 2)
-$
-41 A
-$
-$ 42 - This is the mnemonic for the 'Enter Function...' option on the Option
-$ menu pulldown. (message 143 set 3)
-$
-42 F
-$
-$ 43 - This is the mnemonic for the 'Enter Constant...' option on the Option
-$ menu pulldown. (message 142 set 3)
-$
-43 C
-$
-$ 44 - This is the mnemonic for the 'Exit' option on the Option
-$ menu pulldown. (message 403 set 3)
-$
-44 x
-$
-$ 45 - This is the mnemonic for the 'Financial Registers' option on the Option
-$ menu pulldown. (message 138 set 3)
-$
-45 g
-$
-$ 46 - This is the title for the popup menu.
-$
-46 Kalkylator
-$
-$ Used as the title, In Asian languages labels need to be different
-$ from the menu label.
-$
-47 Hjälp
-$
-$set 3
-$ ****** Module: text.c ****(developer comment only)********
-$
-$ NOTE: there is no Message 1 - 4.
-$
-$ Messages 5-47 are what gets displayed on each of the calculator keys.
-$
-5 Formler
-6 Konstanter
-7 Tang
-$
-$ Message 8 - Int is short for integer.
-$
-8 Hel
-$
-$ Message 9 - Frac is short for fraction.
-$
-9 Dec
-$
-$ Message 10 - Abs is short for absolute value.
-$
-10 Abs
-$
-$ Message 11 - Exp is short for exponent.
-$
-11 Exp
-12 Noggrannhet
-13 Lagra
-14 Hämta
-15 Byt
-16 1/x
-17 x^2
-18 %
-$
-$ Message 19 - Sqrt is short for square root.
-$
-19 Rot
-20 (
-21 )
-$
-$ Message 22 - Bsp is short for backspace.
-$
-22 Bst
-$
-$ Message 23 - Clr is short for clear.
-$
-23 Töm
-24 D
-25 E
-26 F
-27 +/-
-28 A
-29 B
-30 C
-31 X
-32 7
-33 8
-34 9
-35 /
-36 4
-37 5
-38 6
-39 -
-40 1
-41 2
-42 3
-43 +
-44 0
-45 .
-46 =
-47 Slut
-$
-$ Messages 48-51 tell the user what mode they are in.
-$
-48 Bas
-49 Not
-50 Läge
-51 Trig
-$
-$ Messages 52-94 are what gets put on the keys when the user presses the 'Keys'
-$ key. These are the keyboard keys which provide the given function. These are
-$ also known as keyboard accelerators. These keys directly correspond to
-$ Messages 5-47. (i.e 5 maps to 52, 6 maps to 53, etc.).
-$
-52 F - Funk
-53 # - Konst
-54 k - Tang
-55 I - Hel
-$ Message 56 is "Control f"
-56 ^f - Dec
-$ Message 57 is "Control u"
-57 ^u Abs
-58 E - Exp
-59 A - Noggr
-60 S - Lagra
-61 R - Hämta
-62 X - Byt
-63 r - 1/x
-64 @ - x^2
-65 %
-66 s - Rot
-67 (
-68 )
-$
-$ Message 69 is "Control h"
-$
-69 ^h - Bst
-$
-$ Message 70 is "Delete"
-$
-70 del - Töm
-71 d
-72 e
-73 f
-74 C - +/-
-75 a
-76 b
-77 c
-78 x
-79 7
-80 8
-81 9
-82 /
-83 4
-84 5
-85 6
-86 -
-87 1
-88 2
-89 3
-90 +
-91 0
-92 .
-93 =
-94 q - Slut
-$ Messages 95-98 are keyboard acclerators for Messages 48-51
-95 B
-96 D
-97 M
-98 T
-$
-$ NOTE: Messages 99 - 106 aren't used.
-$
-$ Messages 107-118 are dialog/popup titles.
-$
-107 Noggrannhet
-108 Numerisk bas
-109 Konstanter
-110 Byt
-111 Formler
-113 Läge
-114 Notation
-115 Hämta
-116 Skifta höger
-117 Lagra
-118 Trigonometriskt
-$
-$ Messages 119-128 are the messages describing the Constants listed when the
-$ Constant popup is brought up. NOTE: don't translate <=>
-$
-119 kilometer per timme <=> miles per timme
-120 kvadratroten ur 2
-121 e
-122 pi
-123 centimeter <=> tum
-124 grader i en radian
-125 2 ^ 20
-126 gram <=> ounce
-127 kilojoules <=> engelska värmeenheter
-128 kubikcentimeter <=> kubiktum
-$
-$ Messages 132-143 are labels in the dialogs.
-$
-132 Konstant nr:
-133 Formel nr:
-134 Kalkylator
-135 Ny konstant
-136 Ny formel
-137 Minnen
-138 Ekonomiska register
-139 Egenskaper för kalkylatorn
-140 Beskrivning:
-141 Värde:
-142 Lägg in konstant
-143 Lägg in formel
-$
-$ NOTE: Message 144 - 147 aren't used.
-$
-$ Messages 148 is an error message used when the command line is used
-$ improperly. %s tells the user what argument should come next.
-$
-148 %s\n
-$
-$ Message 149 is an error message. %s is either the word "Function" or the
-$ word "Constant" and %1d is a number 0-9. This message gets put in a
-$ dialog when the user defines a new Function or Constant that already
-$ exists and the dialog asks the user wheither to overwrite it. (Message 380)
-$
-149 %s %1d finns redan.
-$
-$ Messages 153-162 are in the accuracy popup menu for the level of accuracy.
-$
-153 0 decimaler
-154 1 decimaler
-155 2 decimaler
-156 3 decimaler
-157 4 decimaler
-158 5 decimaler
-159 6 decimaler
-160 7 decimaler
-161 8 decimaler
-162 9 decimaler
-$
-$ Messages 163-172 are in the Sto, Rcl, Exch popup menu's listing the registers.
-$
-163 Minne 0
-164 Minne 1
-165 Minne 2
-166 Minne 3
-167 Minne 4
-168 Minne 5
-169 Minne 6
-170 Minne 7
-171 Minne 8
-172 Minne 9
-$
-$ Messages 188-191 are the numeric base types of operation.
-$
-188 Binär
-189 Oktal
-190 Decimal
-191 Hexadecimal
-$
-$ Messages 192-194 are the display types.
-$
-192 Teknisk
-193 Normal
-194 Vetenskaplig
-$
-$ Messages 195-197 are the trig. types.
-$
-195 Grader
-196 Gradienter
-197 Radianer
-$
-$ Messages 198-201 are the modes of operation of the calculator.
-$
-198 Standard
-199 Ekonomiskt
-200 Logiskt
-201 Vetenskapligt
-$
-$ Messages 203-207 are the labels in the Financial Registers dialog.
-$
-203 Betp:
-204 r%År:
-205 Nuvärde:
-206 Betalning:
-207 Framtida värde:
-$
-$ Messages 208-217 are the button labels of the financial portion of the
-$ Calculator when it is in Financial mode.
-$
-208 Betp
-209 r%ÅR
-$
-$ Message 210 - Pv stands for Present Value.
-$
-210 Nv
-$
-$ Message 211 - Pmt stands for Payment
-$
-211 Bet
-$
-$ Message 212 - Fv stands for Future Value.
-$
-212 Fv
-$
-$ Message 213 means clear financial registers
-$
-213 TÖMekreg
-$
-$ Message 214 means Compounding term
-$
-214 Avkp
-$
-$ Message 215 means double-declining depreciation
-$
-215 DA
-$
-$ Message 216 means Straight-line depreciation
-$
-216 RA
-$
-$ Message 217 means Sum-of-the-years-digits depreciation
-$
-217 AS
-$
-$ Messages 218-226 are the button labels of the logical portion of the
-$ Calculator when it is in Logical mode.
-$
-$ Message 218 means shift left
-$
-218 <
-$
-$ Message 219 means shift right
-$
-219 >
-$
-$ Message 220 means trunctate to the lower 16 bits.
-$
-220 &16
-$
-$ Message 221 means trunctate to the lower 32 bits.
-$
-221 &32
-$
-$ Message 222 means perform a logical OR
-$
-222 Eller
-$
-$ Message 223 means perform a logical AND
-$
-223 Och
-$
-$ Message 224 means perform a logical NOT
-$
-224 Inte
-$
-$ Message 225 means perform a logical XOR
-$
-225 Xeller
-$
-$ Message 226 means perform a logical XNOR
-$
-226 XIEl
-$
-$ Messages 227-238 are the button labels of the Scientific portion of the
-$ Calculator when it is in Scientific mode. This is the default mode.
-$
-$
-$ Message 227 - Hyp is short for Hyperbolic
-$
-227 Hyp
-$
-$ Message 228 - Inv is short for Inverse
-$
-228 Inv
-229 e^x
-230 10^x
-231 y^x
-232 x!
-233 Cos
-234 Sin
-235 Tan
-236 Ln
-237 Log
-$
-$ Message 238 - Rand is short for Random
-$
-238 ?tal
-$
-$ Messages 239-248 are the button labels of the financial portion of the
-$ Calculator when it is in Financial mode when in "keys" mode. (i.e. button
-$ acclerators).
-$
-239 T - Betp
-$ Message 240 is 'Control r'
-240 ^c - r%År
-241 p - Nv
-242 P - Bet
-243 v - Sv
-244 L - Tömreg
-$ Message 245 is 'Control t'
-245 ^t - Avkp
-$ Message 246 is 'Control d'
-246 ^d - DA
-$ Message 247 is 'Control s'
-247 ^s - RA
-$ Message 248 is 'Control y'
-248 ^y - AS
-$
-$ Messages 249-257 are the button labels of the logical portion of the
-$ Calculator when it is in Logical mode when in "keys" mode. (i.e. button
-$ acclerators).
-$
-249 <
-250 >
-251 [ - &16
-252 ] - &32
-253 | - Eller
-254 & - Och
-255 ~ - Inte
-256 ^ - Xel
-257 n - XIEl
-$
-$ Messages 258-269 are the button labels of the scientific portion of the
-$ Calculator when it is in Scientific mode when in "keys" mode. (i.e. button
-$ acclerators).
-$
-258 h - Hyp
-259 i - Inv
-260 { - e^x
-261 } - 10^x
-262 y - y^x
-263 ! - x!
-$ Message 264 is 'Control c'
-264 ^c - Cos
-$ Message 265 is 'Control s'
-265 ^s - Sin
-$ Message 266 is 'Control t'
-266 ^t - Tan
-267 N - Ln
-268 G - Log
-269 ? - ?tal
-$
-$ Messages 270-272 are capitalized versions of the calculator MODES.
-$
-270 EKONOMISKT
-271 LOGISKT
-272 VETENSKAPLIGT
-$
-$ Messages 273-336 are error messages which will go into $HOME/.errorlog. They
-$ are all math errors. Localization of these are optional.
-$
-273 *** SIGN NOT 0, +1 OR -1 IN MPADD2 CALL.\n
-274 POSSIBLE OVERWRITING PROBLEM ***\n
-275 *** N .LE. 1 IN CALL TO MPART1 ***\n
-276 *** ABS(X) .GT. 1 IN CALL TO MPASIN ***\n
-277 *** ERROR OCCURRED IN MPATAN, RESULT INCORRECT ***
-278 *** B = %d ILLEGAL IN CALL TO MPCHK.\n
-279 PERHAPS NOT SET BEFORE CALL TO AN MP ROUTINE ***\n
-280 *** T = %d ILLEGAL IN CALL TO MPCHK.\n
-282 *** M .LE. T IN CALL TO MPCHK.\n
-284 *** B TOO LARGE IN CALL TO MPCHK ***\n
-285 *** MXR TOO SMALL OR NOT SET TO DIM(R) BEFORE CALL
-286 TO AN MP ROUTINE ***\n
-287 *** MXR SHOULD BE AT LEAST %d*T + %d = %d ***\n
-288 *** ACTUALLY MXR = %d, AND T= %d ***\n
-289 *** FLOATING-POINT OVER/UNDER-FLOW IN MPCMD ***\n
-290 *** FLOATING-POINT OVER/UNDER-FLOW IN MPCMR ***\n
-291 *** J = 0 IN CALL TO MPCQM ***\n
-292 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPDIV ***\n
-293 *** OVERFLOW OCCURRED IN MPDIV ***\n
-294 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPDIVI ***\n
-295 *** INTEGER OVERFLOW IN MPDIVI, B TOO LARGE ***\n
-296 *** OVERFLOW IN SUBROUTINE MPEXP ***\n
-297 *** ERROR OCCURRED IN MPEXP, RESULT INCORRECT ***\n
-298 *** ABS(X) NOT LESS THAN 1 IN CALL TO MPEXP1 ***\n
-299 *** X NONPOSITIVE IN CALL TO MPLN ***\n
-301 *** ERROR IN MPLN, ITERATION NOT CONVERGING ***\n
-302 *** ABS(X) .GE. 1/B IN CALL TO MPLNS ***\n
-303 *** ERROR OCCURRED IN MPLNS.\n
-304 NEWTON ITERATION NOT CONVERGING PROPERLY ***\n
-305 *** INTEGER OVERFLOW IN MPMUL, B TOO LARGE ***\n
-306 *** ILLEGAL BASE B DIGIT IN CALL TO MPMUL.\n
-307 POSSIBLE OVERWRITING PROBLEM ***\n
-308 *** OVERFLOW OCCURRED IN MPMUL2 ***\n
-309 *** INTEGER OVERFLOW IN MPMUL2, B TOO LARGE ***\n
-310 *** ATTEMPTED DIVISION BY ZERO IN MPMULQ ***\n
-311 POSSIBLE OVERWRITING PROBLEM ***\n
-312 *** OVERFLOW OCCURRED IN MPNZR ***\n
-313 *** CALL TO MPOVFL, MP OVERFLOW OCCURRED ***\n
-314 *** ERROR OCCURRED IN MPPI, RESULT INCORRECT ***\n
-315 *** ATTEMPT TO RAISE ZERO TO NEGATIVE POWER IN\n
-316 CALL TO SUBROUTINE MPPWR ***\n
-317 *** X NEGATIVE IN CALL TO MPPWR2 ***\n
-318 *** X ZERO AND Y NONPOSITIVE IN CALL TO MPPWR2 ***\n
-319 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPREC ***\n
-320 *** ERROR OCCURRED IN MPREC, NEWTON ITERATION\n
-321 NOT CONVERGING PROPERLY ***\n
-322 *** OVERFLOW OCCURRED IN MPREC ***\n
-323 *** N = 0 IN CALL TO MPROOT ***\n
-324 *** ABS(N) TOO LARGE IN CALL TO MPROOT ***\n
-325 *** X = 0 AND N NEGATIVE IN CALL TO MPROOT ***\n
-326 *** X NEGATIVE AND N EVEN IN CALL TO MPROOT ***\n
-327 *** ERROR OCCURRED IN MPROOT, NEWTON ITERATION\n
-328 NOT CONVERGING PROPERLY ***\n
-329 *** IDECPL .LE. 0 IN CALL TO MPSET ***\n
-330 ITMAX2 TOO SMALL IN CALL TO MPSET ***\n
-331 *** INCREASE ITMAX2 AND DIMENSIONS OF MP ARRAYS \n
-332 TO AT LEAST %d ***\n
-333 *** ERROR OCCURRED IN MPSIN, RESULT INCORRECT ***\n
-334 *** ABS(X) .GT. 1 IN CALL TO MPSIN1 ***\n
-335 *** X NEGATIVE IN CALL TO SUBROUTINE MPSQRT ***\n
-336 *** TAN(X) TOO LARGE IN CALL TO MPTAN ***\n
-$
-$ Messages 337-343 are error messages from the command line options.
-$ They also will only show up in the errorlog.
-$
-337 Calculator: -a needs accuracy value of 0-9.\n
-$
-$ Message 338 only goes to the errorlog file
-$
-338 Calculator: accuracy should be in the range 0-9\nWill set accuracy to the default: 2.\n
-339 Calculator: base should be binary, octal, decimal or hexadecimal.\nWill set base to the default: decimal.\n
-$
-$ Message 340 - %s is the invalid display mode the user supplied.
-$ This goes to $HOME/.dt/errorlog only.
-$
-340 Calculator: invalid display mode [%s]\n
-$
-$ Message 341 - %s is the invalid mode the user supplied.
-$ This goes to $HOME/.dt/errorlog only.
-$
-341 Calculator: invalid mode [%s]\nWill set mode to its default: scientific\n
-$
-$ Message 342 - %s is the invalid trig. mode the user supplied.
-$ This goes to $HOME/.dt/errorlog only.
-$
-342 Calculator: invalid trig. mode [%s].\n
-343 Calculator: invalid session file.\n
-$
-$ NOTE: no Messages 344 through 350
-$
-$ Message 351 is a label in the ASCII convert dialog.
-$
-351 Tecken:
-$
-$ Message 352 is the title of the ASCII convert dialog.
-$
-352 ASCII-tecken
-$
-$ Messages 353-355 are the Trigonometric types (abbreviations).
-$
-353 Grader
-354 Gradn
-355 Rad
-$
-$ Messages 356-358 are the usage messages.
-$ Don't translate dtcalc, -a, -m, -b, -no_menu_bar -? -notation -trig or
-$ -session.
-$
-356 Kalkylator (dtcalc) version 1.%1d\n\n
-357 Syntax: dtcalc [-a noggrannhet] [-m läge] [-b bas] [-no_menu_bar] [-?]\n
-358 \t [-notation visningsnotation] [-trig trigonometrisk typ] [-session sessionsfil]\n
-$
-$ Messages 359 and 360 not used
-$
-$ Messages 361 - 363 are button labels
-$
-361 Avbryt
-362 Bekräfta
-363 Fortsätt
-364 Fel
-$
-$ Message 365 - 369 not used
-$
-$ Messages 370 - 372 get put under the Calculator display when the
-$ corresponding calculator key is pressed, CLR is short for clear, HYP is
-$ short for Hyperbolic, and INV is short for Inverse.
-$
-370 TÖM
-371 HYP
-372 INV
-373 Felaktigt värde på konstant.
-374 Felaktigt antal konstanter.
-375 Felaktigt antal formler.
-$
-$ Message 376 not used.
-$
-377 Konstanten har inte ändrats.
-378 Numeriskt fel
-379 Operandfel
-380 Vill du ersätta?
-381 Talet måste vara mellan 0 och 9.
-$
-$ Message 382 not used.
-$
-383 Konstant
-384 Formel
-385 Det gick inte att spara standardinställningarna.\n
-$
-$ NOTE: Messages 386 - 402 are not used.
-$
-403 Avsluta
-$
-$ Messages 452-478 are the actual characters that the keyboard accelerators
-$ map to. These are the keyboard keys which provide the given function.
-$ For example: Message 5 is the label of the Functions key, Message 52 is
-$ the label of the Functions key when the "keys" button is pressed, and
-$ finally Message 452 is the character (i.e. 'F') that the calculator uses
-$ to represent the Functions key so if the user had a "function string" which
-$ included 'F' the calculator know that the 'F' represents the Function key.
-$
-$ Message 452 - the Functions key.
-$
-452 F
-$
-$ Message 453 - the Constants key.
-$
-453 #
-$
-$ Message 454 - the Keys key.
-$
-454 k
-$
-$ Message 455 - the Int (integer) key.
-$
-455 I
-$
-$ Message 456 - the Frac (fraction) key.
-$ \006 is "Control f"
-$
-456 \006
-$
-$ Message 457 - the Abs (absolute value) key.
-$ \025 is "Control u"
-$
-457 \025
-$
-$ Message 458 - the Exp (exponent) key.
-$
-458 E
-$
-$ Message 459 - the accuracy key.
-$
-459 A
-$
-$ Message 460 - the Store key (memory register store)
-$
-460 S
-$
-$ Message 461 - the Recall key (memory register recall)
-$
-461 R
-$
-$ Message 462 - the Exchange key (memory register exchange)
-$
-462 X
-$
-$ Message 463 - the 1/x key
-$
-463 r
-$
-$ Message 464 - the x^2 key
-$
-464 @
-$
-$ Message 465 - the % key
-$
-465 %
-$
-$ Message 465 - the square root key
-$
-466 s
-$
-$ Message 467 - the Bsp (backspace) key.
-$ \010 is "Control h"
-$
-467 \010
-$
-$ Message 468 - the clear key.
-$ Message 468 is "Delete" (Note: Message 513 is the same)
-$
-468 \177
-$
-$ Message 469 - hex 'd' key
-$
-469 d
-$
-$ Message 470 - hex 'e' key
-$
-470 e
-$
-$ Message 471 - hex 'f' key
-$
-471 f
-$
-$ Message 472 - Change sign (i.e. +/-) key
-$
-472 C
-$
-$ Message 473 - hex 'a' key
-$
-473 a
-$
-$ Message 474 - hex 'b' key
-$
-474 b
-$
-$ Message 475 - hex 'c' key
-$
-475 c
-$
-$ Message 476 - multiplcation key
-$
-476 x
-$
-$ Message 477 - the quit key
-$
-477 q
-$
-$ NOTE: 478 and 479 are not used.
-$
-$ Messages 480-489 are the actual characters that the keyboard accelerators
-$ map to when the calculator is in Financial mode. These are the keyboard
-$ keys which provide the given function.
-$
-$ Message 480 - the Term key
-$
-480 T
-$
-$ Message 481 - the i%Yr (interest per year)
-$ \022 is 'Control r'
-$
-481 \022
-$
-$ Message 482 - the Pv (present value) key
-$
-482 p
-$
-$ Message 483 - the Pmt (payment) key
-$
-483 P
-$
-$ Message 484 - the Fv (future value) key
-$
-484 v
-$
-$ Message 485 - the clrgs (clear financial registers) key
-$
-485 L
-$
-$ Message 486 - the Ctrm (Compounding term) key
-$ \024 is 'Control t'
-$
-486 \024
-$
-$ Message 487 - the Ddb (Double-declining depreciation) key
-$ \004 is 'Control d'
-$
-487 \004
-$
-$ Message 488 - the Sln (Straight-line depreciation) key
-$ \023 is 'Control s'
-$
-488 \023
-$
-$ Message 489 - the Syd (Sum-of-the-years'-digits depreciation) key
-$ \031 is 'Control y'
-$
-489 \031
-$
-$ Messages 490-496 are the actual characters that the keyboard accelerators
-$ map to when the calculator is in Logical mode. These are the keyboard
-$ keys which provide the given function.
-$
-$ Message 490 - the &16 (truncate to 16 bits) key.
-$
-490 [
-$
-$ Message 491 - the &32 (truncate to 32 bits) key.
-$
-491 ]
-$
-$ Message 492 - the OR key
-$
-492 |
-$
-$ Message 493 - the AND key
-$
-493 &
-$
-$ Message 494 - the NOT key
-$
-494 ~
-$
-$ Message 495 - the XOR key
-$
-495 ^
-$
-$ Message 496 - the XNOR key
-$
-496 n
-$
-$ NOTE 497 - 499 aren't used.
-$
-$ Messages 500-511 are the actual characters that the keyboard accelerators
-$ map to when the calculator is in Scientific mode. These are the keyboard
-$ keys which provide the given function.
-$
-$ Message 500 - the Hyp (Hyperbolic) key
-$
-500 h
-$
-$ Message 501 - the Inv (Inverse) key
-$
-501 i
-$
-$ Message 502 - the e^x key
-$
-502 {
-$
-$ Message 503 - the 10^x key
-$
-503 }
-$
-$ Message 504 - the y^x key
-$
-504 y
-$
-$ Message 505 - the x! key
-$
-505 !
-$
-$ Message 506 - the Cos (cosine) key
-$ \003 is 'Control c'
-$
-506 \003
-$
-$ Message 507 - the Sin (sine) key
-$ \023 is 'Control s'
-$
-507 \023
-$
-$ Message 507 - the Tan (tangent) key
-$ \024 is 'Control t'
-$
-508 \024
-$
-$ Message 509 - the Ln key
-$
-509 N
-$
-$ Message 510 - the Log key
-$
-510 G
-$
-$ Message 510 - the Rand (random) key
-$
-511 ?
-$
-$ Message 512, 513 are HP's del - Clr when it finds an ITF keyboard.
-$
-512 clr disp
-$
-$ Message 513 is 'Clear Display' on HP boxes
-$
-513 \013
-$
-$ added now capability to Financial regs: change the payment per year
-$ The following messages (514 - 517) refect this new button.
-$
-514 Betalningar/år:
-515 BET/ÅR
-516 år - BET/ÅR
-517 år
-$
-$ Used as the title, In Asian languages the dialog title needs to be different
-$ from the menu label.
-$
-518 Ekonomiska register
-$
-$set 4
-$ ****** Module: help.c ****(developer comment only)********
-$ Message 1 is the title for the calculator help dialogs.
-1 Kalkylator - Hjälp
-2 Du måste välja ett objekt inom Kalkylator.
-3 Fel
-4 OK
-
-$set 5
-$ ****** Module: functions.c ****(developer comment only)********
-$
-1 FEL: Beräkningen misslyckades.
-2 FEL: Det finns ingen lösning.
-3 FEL: Det finns flera lösningar.
-4 FEL: Betp<= 0
-5 FEL: Felaktiga udda periodiska värden.
-6 FEL: Talet är för stort för att operationen ska kunna utföras.
-7 Det gick inte att beräkna 'ränta på ränta'\nutan ett räntebelopp,\nett nuvärde och\n ett framtida värde som är större än noll.\n
-
-$set 99
-$ ****** Version Information ********
-$ DO NOT TRANSLATE THESE MESSAGES
-$ DO NOT CHANGE THESE MESSAGES
-$ DO NOT LOCALIZE THESE MESSAGES
-$ These messages are used for the version information.
-$quote "
-1 "@(#)version_goes_here"
-2 "\n@(#)_DtMessage catalog source $XConsortium: dtcalc.msg /main/3 1995/11/08 13:32:16 rswiston $"
-
projects / oweals / cde.git / blobdiff