ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6

[oweals/u-boot.git] / arch / arm / dts / sun4i-a10-olinuxino-lime.dts

diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
index b64aa4eb071e34d49b384e1731657dce451aa972..b74a614965377f49e074567137e490dc7e352087 100644 (file)
--- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts
@@ -45,7 +45,6 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
        model = "Olimex A10-OLinuXino-LIME";
@@ -59,6 +58,17 @@
                stdout-path = "serial0:115200n8";
        };
 
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
@@ -87,7 +97,10 @@
                864000  1300000
                624000  1250000
                >;
-       cooling-max-level = <2>;
+};
+
+&de {
+       status = "okay";
 };
 
 &ehci0 {
@@ -99,8 +112,6 @@
 };
 
 &emac {
-       pinctrl-names = "default";
-       pinctrl-0 = <&emac_pins_a>;
        phy = <&phy1>;
        status = "okay";
 };
@@ -109,9 +120,17 @@
        status = "okay";
 };
 
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&i2c0_pins_a>;
        status = "okay";
 
        axp209: pmic@34 {
@@ -124,6 +143,16 @@
        };
 };
 
+&i2c1 {
+       status = "okay";
+
+       eeprom: eeprom@50 {
+               compatible = "atmel,24c16";
+               reg = <0x50>;
+               pagesize = <16>;
+       };
+};
+
 &mdio {
        status = "okay";
 
@@ -133,12 +162,9 @@
 };
 
 &mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;
-       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-       cd-inverted;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
        status = "okay";
 };
 
@@ -150,28 +176,39 @@
        status = "okay";
 };
 
+&otg_sram {
+       status = "okay";
+};
+
 &pio {
-       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-               allwinner,pins = "PC3";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       led_pins_olinuxinolime: led-pin {
+               pins = "PH2";
+               function = "gpio_out";
+               drive-strength = <20>;
+       };
+
+       usb0_id_detect_pin: usb0-id-detect-pin {
+               pins = "PH4";
+               function = "gpio_in";
+               bias-pull-up;
        };
 
-       led_pins_olinuxinolime: led_pins@0 {
-               allwinner,pins = "PH2";
-               allwinner,function = "gpio_out";
-               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       usb0_vbus_detect_pin: usb0-vbus-detect-pin {
+               pins = "PH5";
+               function = "gpio_in";
+               bias-pull-down;
        };
 };
 
 &reg_ahci_5v {
-       pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
        gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
        status = "okay";
 };
 
+&reg_usb0_vbus {
+       status = "okay";
+};
+
 &reg_usb1_vbus {
        status = "okay";
 };
@@ -182,11 +219,21 @@
 
 &uart0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&uart0_pins_a>;
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
        status = "okay";
 };
 
 &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpio   = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_vbus-supply   = <&reg_usb0_vbus>;
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";