+// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for common parts of Salvator-X board variants
*
* Copyright (C) 2015-2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
*/
/*
/ {
aliases {
serial0 = &scif2;
- serial1 = &scif1;
+ serial1 = &hscif1;
ethernet0 = &avb;
};
*/
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <11289600>;
+ clock-frequency = <12288000>;
};
backlight: backlight {
brightness-levels = <256 128 64 16 8 4 0>;
default-brightness-level = <6>;
+ power-supply = <®_12v>;
enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
};
+ cvbs-in {
+ compatible = "composite-video-connector";
+ label = "CVBS IN";
+
+ port {
+ cvbs_con: endpoint {
+ remote-endpoint = <&adv7482_ain7>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ label = "HDMI IN";
+ type = "a";
+
+ port {
+ hdmi_in_con: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-always-on;
};
- rsnd_ak4613: sound {
- compatible = "simple-audio-card";
+ reg_12v: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcpu>;
- simple-audio-card,frame-master = <&sndcpu>;
+ sound_card: sound {
+ compatible = "audio-graph-card";
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
+ label = "rcar-sound";
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4613>;
- };
+ dais = <&rsnd_port0>;
};
vbus0_usb2: regulator-vbus0-usb2 {
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
- renesas,no-ether-link;
phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&csi20 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ csi20_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&adv7482_txb>;
+ };
+ };
+ };
+};
+
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
};
};
remote-endpoint = <&adv7123_in>;
};
};
- port@3 {
- lvds_connector: endpoint {
- };
- };
};
};
&ehci0 {
+ dr_mode = "otg";
status = "okay";
};
clock-frequency = <32768>;
};
+&hscif1 {
+ pinctrl-0 = <&hscif1_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ /* Please only enable hscif1 or scif1 */
+ status = "okay";
+};
+
&hsusb {
+ dr_mode = "otg";
status = "okay";
};
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
+
+ port {
+ ak4613_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint0>;
+ };
+ };
};
cs2000: clk_multiplier@4f {
&i2c4 {
status = "okay";
+ pca9654: gpio@20 {
+ compatible = "onnn,pca9654";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
csa_vdd: adc@7c {
compatible = "maxim,max9611";
reg = <0x7c>;
shunt-resistor-micro-ohms = <5000>;
};
+
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gpio6>;
+ interrupt-names = "intrq1", "intrq2";
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
+ <31 IRQ_TYPE_LEVEL_LOW>;
+
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
+ };
+
+ port@a {
+ reg = <10>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+
+ port@b {
+ reg = <11>;
+
+ adv7482_txb: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&csi20_in>;
+ };
+ };
+ };
};
&i2c_dvfs {
status = "okay";
+
+ pmic: pmic@30 {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
+ compatible = "rohm,bd9571mwv";
+ reg = <0x30>;
+ interrupt-parent = <&intc_ex>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ rohm,ddr-backup-power = <0xf>;
+ rohm,rstbmode-level;
+
+ regulators {
+ dvfs: dvfs {
+ regulator-name = "dvfs";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
};
&ohci0 {
+ dr_mode = "otg";
status = "okay";
};
avb_pins: avb {
mux {
- groups = "avb_link", "avb_phy_int", "avb_mdc",
- "avb_mii";
+ groups = "avb_link", "avb_mdio", "avb_mii";
function = "avb";
};
- pins_mdc {
- groups = "avb_mdc";
+ pins_mdio {
+ groups = "avb_mdio";
drive-strength = <24>;
};
function = "du";
};
+ hscif1_pins: hscif1 {
+ groups = "hscif1_data_a", "hscif1_ctrl_a";
+ function = "hscif1";
+ };
+
i2c2_pins: i2c2 {
groups = "i2c2_a";
function = "i2c2";
};
+ irq0_pins: irq0 {
+ groups = "intc_ex_irq0";
+ function = "intc_ex";
+ };
+
pwm1_pins: pwm1 {
groups = "pwm1_a";
function = "pwm1";
};
sdhi2_pins: sd2 {
- groups = "sdhi2_data8", "sdhi2_ctrl";
+ groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
power-source = <3300>;
};
sdhi2_pins_uhs: sd2_uhs {
- groups = "sdhi2_data8", "sdhi2_ctrl";
+ groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
function = "sdhi2";
power-source = <1800>;
};
bias-pull-down;
};
};
+
+ usb30_pins: usb30 {
+ groups = "usb30";
+ function = "usb30";
+ };
};
&pwm1 {
<&audio_clk_c>,
<&cpg CPG_CORE CPG_AUDIO_CLK_I>;
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src0 &dvc0>;
- capture = <&ssi1 &src1 &dvc1>;
+ ports {
+ rsnd_port0: port@0 {
+ rsnd_endpoint0: endpoint {
+ remote-endpoint = <&ak4613_endpoint>;
+
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_endpoint0>;
+ frame-master = <&rsnd_endpoint0>;
+
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
};
};
};
pinctrl-names = "default";
uart-has-rtscts;
- status = "okay";
+ /* Please only enable hscif1 or scif1 */
+ /* status = "okay"; */
};
&scif2 {
bus-width = <8>;
mmc-hs200-1_8v;
non-removable;
+ fixed-emmc-driver-type = <1>;
status = "okay";
};
shared-pin;
};
+&usb_extal_clk {
+ clock-frequency = <50000000>;
+};
+
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
status = "okay";
};
-&wdt0 {
+&usb3_peri0 {
+ phys = <&usb3_phy0>;
+ phy-names = "usb";
+
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3s0_clk {
+ clock-frequency = <100000000>;
+};
+
+&vin0 {
+ status = "okay";
+};
+
+&vin1 {
+ status = "okay";
+};
+
+&vin2 {
+ status = "okay";
+};
+
+&vin3 {
+ status = "okay";
+};
+
+&vin4 {
+ status = "okay";
+};
+
+&vin5 {
+ status = "okay";
+};
+
+&vin6 {
+ status = "okay";
+};
+
+&vin7 {
+ status = "okay";
+};
+
+&rwdt {
timeout-sec = <60>;
status = "okay";
};
&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
projects / oweals / u-boot.git / blobdiff