1 $ *************************************<+>*************************************
3 $ COMPONENT_NAME: desktop
26 $ ORIGINS: 27,118,119,120,121
28 $ This module contains IBM CONFIDENTIAL code. -- (IBM
29 $ Confidential Restricted when combined with the aggregated
30 $ modules for this product)
31 $ OBJECT CODE ONLY SOURCE MATERIALS
33 $ (C) COPYRIGHT International Business Machines Corp. 1995
35 $ US Government Users Restricted Rights - Use, duplication or
36 $ disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
38 $ *************************************<+>*************************************
39 $ *****************************************************************************
43 $ ** Project: CDE dtcalc
47 $ ** This file is the source for the message catalog for dtcalc
48 $ ** Any additional messages are to be added to this file by hand,
49 $ ** and the associated index number placed in the code.
51 $ *****************************************************************************
53 $ ** (c) Copyright 1993, 1994 Hewlett-Packard Company
54 $ ** (c) Copyright 1993, 1994 International Business Machines Corp.
55 $ ** (c) Copyright 1993, 1994 Sun Microsystems, Inc.
56 $ ** (c) Copyright 1993, 1994 Novell, Inc.
59 $ *****************************************************************************
60 $ *************************************<+>*************************************
62 $ *************************************<L>*************************************
63 $ ** -----------------GENERAL LOCALIZATION NOTES SECTION---------------------
64 $ * Comment lines begin with a $ except $set which indicates the start of a
67 $ * Do not delete any comments; you may add comments for your use.
69 $ ** ----------------GENERAL LOCALIZATION NOTES SECTION END------------------
70 $ *************************************<L>*************************************
72 $ *****************************************************************************
74 $ ***** NOTE FOR MESSAGE CATALOG TRANSLATORS *****
76 $ There may be three types of messages in this file:
78 $ 1. Messages that appear in dialogs or are displayed to the user.
80 $ These messages are the default and they should ALL BE LOCALIZED.
81 $ Note that these messages do NOT have any identification (see the
82 $ comments for type 2 and 3 below).
84 $ 2. Messages that only appear in the DT error log file ($HOME?.dt/errorlog).
86 $ The localization of these messages is OPTIONAL. These messages are
87 $ identified by the following:
89 $ MESSAGES xx-yy WILL ONLY APPEAR IN THE DT ERRORLOG FILE
91 $ 3. Messages that should not be localized.
93 $ These messages are identified by the following:
95 $ DO NOT TRANSLATE or CHANGE or LOCALIZE MESSAGES xx-yy
97 $ ***** END (NOTE FOR MESSAGE CATALOG TRANSLATORS) *****
99 $ *****************************************************************************
102 $ ****** Module: motif.c ****(developer comment only)********
104 $ Messages 1 - 4 are used by the "numeric base" option button. Bin is
105 $ short for Binary, Oct is short for Octal, Dec is short for Decimal and
106 $ Hex is short for Hexidecimal. Keep these to 3 to 4 characters!
113 $ Messages 5 - 7 are used by the "display mode" option button. Eng is an
114 $ abbreviation for Engineering, Fix is an abbreviation for Fixed, and
115 $ Sci is an abbreviation for Scientific. Keep these to 3 characters.
123 $ Messages 9 - 11 refer to the three modes the Calculator can operate in.
124 $ They are listed in the "Mode" option button.
130 $ Message 12 - This is the title to the Calculator.
134 $ Messages 13 - 30 are the labels in the menubar pulldown menus and the
135 $ mnemonic's (the letter that gets underlined for keyboard access) that
138 $ Message 13 is the mnemonic for Message 14
142 15 ¥á¥â¥ê¡¦¥ì¥¸¥¹¥¿(R)
145 $ Message 17 is the mnemonic for Message 18
150 $ Message 19 is the mnemonic for Message 20
155 $ Message 21 is the mnemonic for Message 22
160 $ Message 23 is the mnemonic for Message 24
165 $ Message 25 is the mnemonic for Message 26
170 $ Message 27 is the mnemonic for Message 28
175 $ Message 29 is the mnemonic for Message 30
180 $ Message 31 is an simple error message.
182 31 ¥Ç¥£¥¹¥×¥ì¥¤¤ò³«¤±¤Þ¤»¤ó¡£\n
184 $ Messages 32 and 33 are button labels for dialog boxes.
189 $ Message 34 is an simple error message.
191 34 ¥»¥Ã¥·¥ç¥ó¡¦¥Õ¥¡¥¤¥ë¤ò³«¤±¤Þ¤»¤ó¡£
193 $ Message 35 - Gets put in the "Functions" popup when no functions have been
194 $ defined by the users.
196 35 ´Ø¿ô¤¬ÄêµÁ¤µ¤ì¤Æ¤¤¤Þ¤»¤ó¡£
198 $ Message 36 and 37 are titles to two types of dialogs.
203 $ Message 38 and 39 are another label for the Help pulldown menu.
204 $ Message 38 is the mnemonic for Message 39
209 $ 40 - This is the mnemonic for the 'Memory Registers...' option on
210 $ the Option menu pulldown. (message 15 set 2)
214 $ 41 - This is the mnemonic for the 'ASCII Convert...' option on the Option
215 $ menu pulldown. (message 16 set 2)
219 $ 42 - This is the mnemonic for the 'Enter Function...' option on the Option
220 $ menu pulldown. (message 143 set 3)
224 $ 43 - This is the mnemonic for the 'Enter Constant...' option on the Option
225 $ menu pulldown. (message 142 set 3)
229 $ 44 - This is the mnemonic for the 'Exit' option on the Option
230 $ menu pulldown. (message 403 set 3)
234 $ 45 - This is the mnemonic for the 'Financial Registers' option on the Option
235 $ menu pulldown. (message 138 set 3)
239 $ 46 - This is the title for the popup menu.
243 $ Used as the title, In Asian languages labels need to be different
244 $ from the menu label.
249 $ ****** Module: text.c ****(developer comment only)********
251 $ NOTE: there is no Message 1 - 4.
253 $ Messages 5-47 are what gets displayed on each of the calculator keys.
262 $ Message 8 - Int is short for integer.
267 $ Message 9 - Frac is short for fraction.
272 $ Message 10 - Abs is short for absolute value.
277 $ Message 11 - Exp is short for exponent.
295 $ Message 19 - Sqrt is short for square root.
302 $ Message 22 - Bsp is short for backspace.
306 $ Message 23 - Clr is short for clear.
336 $ Messages 48-51 tell the user what mode they are in.
343 $ Messages 52-94 are what gets put on the keys when the user presses the 'Keys'
344 $ key. These are the keyboard keys which provide the given function. These are
345 $ also known as keyboard accelerators. These keys directly correspond to
346 $ Messages 5-47. (i.e 5 maps to 52, 6 maps to 53, etc.).
356 $ Message 56 is "Control f"
359 $ Message 57 is "Control u"
382 $ Message 69 is "Control h"
386 $ Message 70 is "Delete"
415 $ Messages 95-98 are keyboard acclerators for Messages 48-51
421 $ NOTE: Messages 99 - 106 aren't used.
423 $ Messages 107-118 are dialog/popup titles.
431 114 ¥Ç¥£¥¹¥×¥ì¥¤¡¦¥¿¥¤¥×
437 $ Messages 119-128 are the messages describing the Constants listed when the
438 $ Constant popup is brought up. NOTE: don't translate <=>
440 119 ¥¥í¥á¡¼¥È¥ëËè»þ <=> ¥Þ¥¤¥ëËè»þ
444 123 ¥»¥ó¥Á¥á¡¼¥È¥ë <=> ¥¤¥ó¥Á
447 126 ¥°¥é¥à <=> ¥ª¥ó¥¹
448 127 ¥¥í¥¸¥å¡¼¥ë <=> ±Ñ¹ñÇ®ÎÌñ°Ì
449 128 ΩÊý¥»¥ó¥Á¥á¡¼¥È¥ë <=> ΩÊý¥¤¥ó¥Á
451 $ Messages 132-143 are labels in the dialogs.
466 $ NOTE: Message 144 - 147 aren't used.
468 $ Messages 148 is an error message used when the command line is used
469 $ improperly. %s tells the user what argument should come next.
473 $ Message 149 is an error message. %s is either the word "Function" or the
474 $ word "Constant" and %1d is a number 0-9. This message gets put in a
475 $ dialog when the user defines a new Function or Constant that already
476 $ exists and the dialog asks the user wheither to overwrite it. (Message 380)
478 149 %s %1d ¤Ï¤¹¤Ç¤Ë¸ºß¤·¤Þ¤¹¡£
480 $ Messages 153-162 are in the accuracy popup menu for the level of accuracy.
493 $ Messages 163-172 are in the Sto, Rcl, Exch popup menu's listing the registers.
506 $ Messages 188-191 are the numeric base types of operation.
513 $ Messages 192-194 are the display types.
519 $ Messages 195-197 are the trig. types.
525 $ Messages 198-201 are the modes of operation of the calculator.
532 $ Messages 203-207 are the labels in the Financial Registers dialog.
540 $ Messages 208-217 are the button labels of the financial portion of the
541 $ Calculator when it is in Financial mode.
548 $ Message 210 - Pv stands for Present Value.
553 $ Message 211 - Pmt stands for Payment
558 $ Message 212 - Fv stands for Future Value.
563 $ Message 213 means clear financial registers
568 $ Message 214 means Compounding term
573 $ Message 215 means double-declining depreciation
578 $ Message 216 means Straight-line depreciation
583 $ Message 217 means Sum-of-the-years-digits depreciation
588 $ Messages 218-226 are the button labels of the logical portion of the
589 $ Calculator when it is in Logical mode.
591 $ Message 218 means shift left
595 $ Message 219 means shift right
599 $ Message 220 means trunctate to the lower 16 bits.
603 $ Message 221 means trunctate to the lower 32 bits.
607 $ Message 222 means perform a logical OR
612 $ Message 223 means perform a logical AND
617 $ Message 224 means perform a logical NOT
622 $ Message 225 means perform a logical XOR
627 $ Message 226 means perform a logical XNOR
632 $ Messages 227-238 are the button labels of the Scientific portion of the
633 $ Calculator when it is in Scientific mode. This is the default mode.
636 $ Message 227 - Hyp is short for Hyperbolic
641 $ Message 228 - Inv is short for Inverse
664 $ Message 238 - Rand is short for Random
669 $ Messages 239-248 are the button labels of the financial portion of the
670 $ Calculator when it is in Financial mode when in "keys" mode. (i.e. button
675 $ Message 240 is 'Control r'
687 $ 244 L - ºâ̳ÅÐÏ¿¤Î¾Ãµî
688 $ Message 245 is 'Control t'
691 $ Message 246 is 'Control d'
693 $ 246 ^d - ÇܳÛÄêΨˡ
694 $ Message 247 is 'Control s'
697 $ Message 248 is 'Control y'
699 $ 248 ^y - »»½Ñµé¿ôË¡
701 $ Messages 249-257 are the button labels of the logical portion of the
702 $ Calculator when it is in Logical mode when in "keys" mode. (i.e. button
717 $ 256 ^ - ÇÓ¾ŪÏÀÍýÏÂ
720 $ Messages 258-269 are the button labels of the scientific portion of the
721 $ Calculator when it is in Scientific mode when in "keys" mode. (i.e. button
733 $ 261 } - 10 ¤Î¤Ù¤¾è
736 $ Message 264 is 'Control c'
739 $ Message 265 is 'Control s'
742 $ Message 266 is 'Control t'
747 $ 266 ^t - ¥¿¥ó¥¸¥§¥ó¥È
752 $ Messages 270-272 are capitalized versions of the calculator MODES.
758 $ Messages 273-336 are error messages which will go into $HOME/.errorlog. They
759 $ are all math errors. Localization of these are optional.
761 273 *** SIGN NOT 0, +1 OR -1 IN MPADD2 CALL.\n
762 274 POSSIBLE OVERWRITING PROBLEM ***\n
763 275 *** N .LE. 1 IN CALL TO MPART1 ***\n
764 276 *** ABS(X) .GT. 1 IN CALL TO MPASIN ***\n
765 277 *** ERROR OCCURRED IN MPATAN, RESULT INCORRECT ***
766 278 *** B = %d ILLEGAL IN CALL TO MPCHK.\n
767 279 PERHAPS NOT SET BEFORE CALL TO AN MP ROUTINE ***\n
768 280 *** T = %d ILLEGAL IN CALL TO MPCHK.\n
769 282 *** M .LE. T IN CALL TO MPCHK.\n
770 284 *** B TOO LARGE IN CALL TO MPCHK ***\n
771 285 *** MXR TOO SMALL OR NOT SET TO DIM(R) BEFORE CALL
772 286 TO AN MP ROUTINE ***\n
773 287 *** MXR SHOULD BE AT LEAST %d*T + %d = %d ***\n
774 288 *** ACTUALLY MXR = %d, AND T= %d ***\n
775 289 *** FLOATING-POINT OVER/UNDER-FLOW IN MPCMD ***\n
776 290 *** FLOATING-POINT OVER/UNDER-FLOW IN MPCMR ***\n
777 291 *** J = 0 IN CALL TO MPCQM ***\n
778 292 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPDIV ***\n
779 293 *** OVERFLOW OCCURRED IN MPDIV ***\n
780 294 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPDIVI ***\n
781 295 *** INTEGER OVERFLOW IN MPDIVI, B TOO LARGE ***\n
782 296 *** OVERFLOW IN SUBROUTINE MPEXP ***\n
783 297 *** ERROR OCCURRED IN MPEXP, RESULT INCORRECT ***\n
784 298 *** ABS(X) NOT LESS THAN 1 IN CALL TO MPEXP1 ***\n
785 299 *** X NONPOSITIVE IN CALL TO MPLN ***\n
786 301 *** ERROR IN MPLN, ITERATION NOT CONVERGING ***\n
787 302 *** ABS(X) .GE. 1/B IN CALL TO MPLNS ***\n
788 303 *** ERROR OCCURRED IN MPLNS.\n
789 304 NEWTON ITERATION NOT CONVERGING PROPERLY ***\n
790 305 *** INTEGER OVERFLOW IN MPMUL, B TOO LARGE ***\n
791 306 *** ILLEGAL BASE B DIGIT IN CALL TO MPMUL.\n
792 307 POSSIBLE OVERWRITING PROBLEM ***\n
793 308 *** OVERFLOW OCCURRED IN MPMUL2 ***\n
794 309 *** INTEGER OVERFLOW IN MPMUL2, B TOO LARGE ***\n
795 310 *** ATTEMPTED DIVISION BY ZERO IN MPMULQ ***\n
796 311 POSSIBLE OVERWRITING PROBLEM ***\n
797 312 *** OVERFLOW OCCURRED IN MPNZR ***\n
798 313 *** CALL TO MPOVFL, MP OVERFLOW OCCURRED ***\n
799 314 *** ERROR OCCURRED IN MPPI, RESULT INCORRECT ***\n
800 315 *** ATTEMPT TO RAISE ZERO TO NEGATIVE POWER IN\n
801 316 CALL TO SUBROUTINE MPPWR ***\n
802 317 *** X NEGATIVE IN CALL TO MPPWR2 ***\n
803 318 *** X ZERO AND Y NONPOSITIVE IN CALL TO MPPWR2 ***\n
804 319 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPREC ***\n
805 320 *** ERROR OCCURRED IN MPREC, NEWTON ITERATION\n
806 321 NOT CONVERGING PROPERLY ***\n
807 322 *** OVERFLOW OCCURRED IN MPREC ***\n
808 323 *** N = 0 IN CALL TO MPROOT ***\n
809 324 *** ABS(N) TOO LARGE IN CALL TO MPROOT ***\n
810 325 *** X = 0 AND N NEGATIVE IN CALL TO MPROOT ***\n
811 326 *** X NEGATIVE AND N EVEN IN CALL TO MPROOT ***\n
812 327 *** ERROR OCCURRED IN MPROOT, NEWTON ITERATION\n
813 328 NOT CONVERGING PROPERLY ***\n
814 329 *** IDECPL .LE. 0 IN CALL TO MPSET ***\n
815 330 ITMAX2 TOO SMALL IN CALL TO MPSET ***\n
816 331 *** INCREASE ITMAX2 AND DIMENSIONS OF MP ARRAYS \n
817 332 TO AT LEAST %d ***\n
818 333 *** ERROR OCCURRED IN MPSIN, RESULT INCORRECT ***\n
819 334 *** ABS(X) .GT. 1 IN CALL TO MPSIN1 ***\n
820 335 *** X NEGATIVE IN CALL TO SUBROUTINE MPSQRT ***\n
821 336 *** TAN(X) TOO LARGE IN CALL TO MPTAN ***\n
823 $ Messages 337-343 are error messages from the command line options.
824 $ They also will only show up in the errorlog.
826 337 ÅÅÂî: -a ¥ª¥×¥·¥ç¥ó¤Ë¤Ï¡¢ÀºÅÙ¤ÎÃÍ 0-9 ¤¬É¬ÍפǤ¹¡£\n
828 $ Message 338 only goes to the errorlog file
830 338 ÅÅÂî: ÀºÅÙ¤Ï 0-9 ¤ÎÈϰϤǤʤ±¤ì¤Ð¤Ê¤ê¤Þ¤»¤ó¡£\nÀºÅÙ¤ò¥Ç¥Õ¥©¥ë¥È¤Î 2 ¤ËÀßÄꤷ¤Þ¤¹¡£\n
831 339 ÅÅÂî: ´ð¿ô¤Ï 2 ¿Ê¡¢8 ¿Ê¡¢10 ¿Ê¡¢¤Þ¤¿¤Ï 16 ¿Ê¤Ç¤Ê¤±¤ì¤Ð¤Ê¤ê¤Þ¤»¤ó¡£\n\
832 ´ð¿ô¤ò¥Ç¥Õ¥©¥ë¥È¤Î 10 ¿Ê¤ËÀßÄꤷ¤Þ¤¹¡£\n
834 $ Message 340 - %s is the invalid display mode the user supplied.
835 $ This goes to $HOME/.dt/errorlog only.
837 340 ÅÅÂî: ɽ¼¨¥â¡¼¥É [%s] ¤¬Ìµ¸ú¤Ç¤¹¡£\n
839 $ Message 341 - %s is the invalid mode the user supplied.
840 $ This goes to $HOME/.dt/errorlog only.
842 341 ÅÅÂî: ¥â¡¼¥É [%s] ¤¬Ìµ¸ú¤Ç¤¹¡£\n¥â¡¼¥É¤ò¥Ç¥Õ¥©¥ë¥È(²Ê³Ø)¤ËÀßÄꤷ¤Þ¤¹¡£\n
844 $ Message 342 - %s is the invalid trig. mode the user supplied.
845 $ This goes to $HOME/.dt/errorlog only.
847 342 ÅÅÂî: »°³Ñ´Ø¿ô¥â¡¼¥É [%s] ¤Ï̵¸ú¤Ç¤¹¡£\n
848 343 ÅÅÂî: ¥»¥Ã¥·¥ç¥ó¡¦¥Õ¥¡¥¤¥ë¤¬Ìµ¸ú¤Ç¤¹¡£\n
850 $ NOTE: no Messages 344 through 350
852 $ Message 351 is a label in the ASCII convert dialog.
856 $ Message 352 is the title of the ASCII convert dialog.
860 $ Messages 353-355 are the Trigonometric types (abbreviations).
866 $ Messages 356-358 are the usage messages.
867 $ Don't translate dtcalc, -a, -m, -b, -no_menu_bar -? -notation -trig or
870 356 ÅÅÂî(dtcalc)¥Ð¡¼¥¸¥ç¥ó 1.%1d\n\n
871 357 »ÈÍÑÊýË¡: dtcalc [-a ÀºÅÙ] [-m ¥â¡¼¥É] [-b ´ð¿ô] [-no_menu_bar] [-?]\n
872 358 \t [-notation ɽ¼¨ÄÌÃÎ] [-trig »°³Ñ´Ø¿ô¤Î¥¿¥¤¥×] [-session ¥»¥Ã¥·¥ç¥ó¡¦¥Õ¥¡¥¤¥ë]\n
874 $ Messages 359 and 360 not used
876 $ Messages 361 - 363 are button labels
883 $ Message 365 - 369 not used
885 $ Messages 370 - 372 get put under the Calculator display when the
886 $ corresponding calculator key is pressed, CLR is short for clear, HYP is
887 $ short for Hyperbolic, and INV is short for Inverse.
892 373 Äê¿ô¤ÎÃͤÏ̵¸ú¤Ç¤¹¡£
893 374 Äê¿ôÈÖ¹æ¤Ï̵¸ú¤Ç¤¹¡£
894 375 ´Ø¿ôÈÖ¹æ¤Ï̵¸ú¤Ç¤¹¡£
896 $ Message 376 not used.
898 377 Äê¿ô¤òÊѹ¹¤·¤Þ¤»¤ó¡£
899 378 ¿ôÃÍ¥¹¥¿¥Ã¥¯¡¦¥¨¥é¡¼¤¬È¯À¸¤·¤Þ¤·¤¿¡£
900 379 ¥ª¥Ú¥é¥ó¥É¡¦¥¹¥¿¥Ã¥¯¡¦¥¨¥é¡¼¤¬È¯À¸¤·¤Þ¤·¤¿¡£
901 380 ¾å½ñ¤¤·¤Æ¤â¤¤¤¤¤Ç¤¹¤«?
902 381 0 - 9 ¤ÎÈϰϤǤʤ±¤ì¤Ð¤Ê¤ê¤Þ¤»¤ó¡£
904 $ Message 382 not used.
908 385 ¥Ç¥Õ¥©¥ë¥È¤òÊݸ¤Ç¤¤Þ¤»¤ó¡£\n
910 $ NOTE: Messages 386 - 402 are not used.
914 $ Messages 452-478 are the actual characters that the keyboard accelerators
915 $ map to. These are the keyboard keys which provide the given function.
916 $ For example: Message 5 is the label of the Functions key, Message 52 is
917 $ the label of the Functions key when the "keys" button is pressed, and
918 $ finally Message 452 is the character (i.e. 'F') that the calculator uses
919 $ to represent the Functions key so if the user had a "function string" which
920 $ included 'F' the calculator know that the 'F' represents the Function key.
922 $ Message 452 - the Functions key.
926 $ Message 453 - the Constants key.
930 $ Message 454 - the Keys key.
934 $ Message 455 - the Int (integer) key.
938 $ Message 456 - the Frac (fraction) key.
939 $ \006 is "Control f"
943 $ Message 457 - the Abs (absolute value) key.
944 $ \025 is "Control u"
948 $ Message 458 - the Exp (exponent) key.
952 $ Message 459 - the accuracy key.
956 $ Message 460 - the Store key (memory register store)
960 $ Message 461 - the Recall key (memory register recall)
964 $ Message 462 - the Exchange key (memory register exchange)
968 $ Message 463 - the 1/x key
972 $ Message 464 - the x^2 key
976 $ Message 465 - the % key
980 $ Message 465 - the square root key
984 $ Message 467 - the Bsp (backspace) key.
985 $ \010 is "Control h"
989 $ Message 468 - the clear key.
990 $ Message 468 is "Delete" (Note: Message 513 is the same)
994 $ Message 469 - hex 'd' key
998 $ Message 470 - hex 'e' key
1002 $ Message 471 - hex 'f' key
1006 $ Message 472 - Change sign (i.e. +/-) key
1010 $ Message 473 - hex 'a' key
1014 $ Message 474 - hex 'b' key
1018 $ Message 475 - hex 'c' key
1022 $ Message 476 - multiplcation key
1026 $ Message 477 - the quit key
1030 $ NOTE: 478 and 479 are not used.
1032 $ Messages 480-489 are the actual characters that the keyboard accelerators
1033 $ map to when the calculator is in Financial mode. These are the keyboard
1034 $ keys which provide the given function.
1036 $ Message 480 - the Term key
1040 $ Message 481 - the i%Yr (interest per year)
1041 $ \022 is 'Control r'
1045 $ Message 482 - the Pv (present value) key
1049 $ Message 483 - the Pmt (payment) key
1053 $ Message 484 - the Fv (future value) key
1057 $ Message 485 - the clrgs (clear financial registers) key
1061 $ Message 486 - the Ctrm (Compounding term) key
1062 $ \024 is 'Control t'
1066 $ Message 487 - the Ddb (Double-declining depreciation) key
1067 $ \004 is 'Control d'
1071 $ Message 488 - the Sln (Straight-line depreciation) key
1072 $ \023 is 'Control s'
1076 $ Message 489 - the Syd (Sum-of-the-years'-digits depreciation) key
1077 $ \031 is 'Control y'
1081 $ Messages 490-496 are the actual characters that the keyboard accelerators
1082 $ map to when the calculator is in Logical mode. These are the keyboard
1083 $ keys which provide the given function.
1085 $ Message 490 - the &16 (truncate to 16 bits) key.
1089 $ Message 491 - the &32 (truncate to 32 bits) key.
1093 $ Message 492 - the OR key
1097 $ Message 493 - the AND key
1101 $ Message 494 - the NOT key
1105 $ Message 495 - the XOR key
1109 $ Message 496 - the XNOR key
1113 $ NOTE 497 - 499 aren't used.
1115 $ Messages 500-511 are the actual characters that the keyboard accelerators
1116 $ map to when the calculator is in Scientific mode. These are the keyboard
1117 $ keys which provide the given function.
1119 $ Message 500 - the Hyp (Hyperbolic) key
1123 $ Message 501 - the Inv (Inverse) key
1127 $ Message 502 - the e^x key
1131 $ Message 503 - the 10^x key
1135 $ Message 504 - the y^x key
1139 $ Message 505 - the x! key
1143 $ Message 506 - the Cos (cosine) key
1144 $ \003 is 'Control c'
1148 $ Message 507 - the Sin (sine) key
1149 $ \023 is 'Control s'
1153 $ Message 507 - the Tan (tangent) key
1154 $ \024 is 'Control t'
1158 $ Message 509 - the Ln key
1162 $ Message 510 - the Log key
1166 $ Message 510 - the Rand (random) key
1170 $ Message 512, 513 are HP's del - Clr when it finds an ITF keyboard.
1174 $ Message 513 is 'Clear Display' on HP boxes
1178 $ added now capability to Financial regs: change the payment per year
1179 $ The following messages (514 - 517) refect this new button.
1186 $ Used as the title, In Asian languages the dialog title needs to be different
1187 $ from the menu label.
1191 $ ****** Module: help.c ****(developer comment only)********
1192 $ Message 1 is the title for the calculator help dialogs.
1194 2 ÅÅÂîÆâ¤Ç¹àÌܤòÁªÂò¤·¤Ê¤±¤ì¤Ð¤Ê¤ê¤Þ¤»¤ó¡£
1199 $ ****** Module: functions.c ****(developer comment only)********
1201 1 ¥¨¥é¡¼: ·×»»¤Ë¼ºÇÔ¤·¤Þ¤·¤¿¡£
1202 2 ¥¨¥é¡¼: ²òÅú¤¬¤¢¤ê¤Þ¤»¤ó¡£
1203 3 ¥¨¥é¡¼: Ê£¿ô²òÅú¤¬¤¢¤ê¤Þ¤¹¡£
1205 5 ¥¨¥é¡¼: ´ü´Ö¤ÎÃͤ¬Ìµ¸ú¤Ç¤¹¡£
1206 6 ¥¨¥é¡¼: Áàºî¤¹¤ë¤Ë¤Ï¿ô»ú¤¬Â礤¹¤®¤Þ¤¹¡£
1207 7 0 °Ê³°¤ÎÍøΨ¡¢0 °Ê³°¤Î¸½ºß¤ÎÃÍ¡¢¤ª¤è¤Ó 0 °Ê³°¤Î¾Íè¤ÎÃͤ¬¤Ê¤±¤ì¤Ð¡¢\n'Ê£¹ç´ü´Ö' ¤ò·×»»¤Ç¤¤Þ¤»¤ó¡£
1208 $ 1 ¥¨¥é¡¼: ·×»»¤Ë¼ºÇÔ¤·¤Þ¤·¤¿¡£
1209 $ 2 ¥¨¥é¡¼: ²òÅú¤¬¤¢¤ê¤Þ¤»¤ó¡£
1210 $ 3 ¥¨¥é¡¼: Ê£¿ô²òÅú¤¬¤¢¤ê¤Þ¤¹¡£
1211 $ 4 ¥¨¥é¡¼: ´ü´Ö <= 0
1212 $ 5 ¥¨¥é¡¼: ´ü´Ö¤ÎÃͤ¬Ìµ¸ú¤Ç¤¹¡£
1213 $ 6 ¥¨¥é¡¼: ·×»»¤¹¤ë¤Ë¤Ï¿ô»ú¤¬Â礤¹¤®¤Þ¤¹¡£
1214 $ 7 0 °Ê³°¤ÎÍøΨ¡¢0 °Ê³°¤Î¸½ºß¤ÎÃÍ¡¢¤ª¤è¤Ó 0 °Ê³°¤Î¾Íè¤ÎÃͤ¬¤Ê¤±¤ì¤Ð¡¢\n[Ê£¹ç´ü´Ö] ¤ò·×»»¤Ç¤¤Þ¤»¤ó¡£
1217 $ ****** Version Information ********
1218 $ DO NOT TRANSLATE THESE MESSAGES
1219 $ DO NOT CHANGE THESE MESSAGES
1220 $ DO NOT LOCALIZE THESE MESSAGES
1221 $ These messages are used for the version information.
1222 1 @(#)version_goes_here
1223 2 \n@(#)_DtMessage catalog source $XConsortium: dtcalc.msg /main/4 1996/10/16 03:13:46 cde-hit $