1 $ *************************************<+>*************************************
2 $ *****************************************************************************
6 $ ** Project: CDE dtcalc
10 $ ** This file is the source for the message catalog for dtcalc
11 $ ** Any additional messages are to be added to this file by hand,
12 $ ** and the associated index number placed in the code.
14 $ *****************************************************************************
16 $ ** (c) Copyright 1993, 1994 Hewlett-Packard Company
17 $ ** (c) Copyright 1993, 1994 International Business Machines Corp.
18 $ ** (c) Copyright 1993, 1994 Sun Microsystems, Inc.
19 $ ** (c) Copyright 1993, 1994 Novell, Inc.
22 $ *****************************************************************************
23 $ *************************************<+>*************************************
25 $ *************************************<L>*************************************
26 $ ** -----------------GENERAL LOCALIZATION NOTES SECTION---------------------
27 $ * Comment lines begin with a $ except $set which indicates the start of a
30 $ * Do not delete any comments; you may add comments for your use.
32 $ ** ----------------GENERAL LOCALIZATION NOTES SECTION END------------------
33 $ *************************************<L>*************************************
35 $ *****************************************************************************
37 $ ***** NOTE FOR MESSAGE CATALOG TRANSLATORS *****
39 $ There may be three types of messages in this file:
41 $ 1. Messages that appear in dialogs or are displayed to the user.
43 $ These messages are the default and they should ALL BE LOCALIZED.
44 $ Note that these messages do NOT have any identification (see the
45 $ comments for type 2 and 3 below).
47 $ 2. Messages that only appear in the DT error log file ($HOME?.dt/errorlog).
49 $ The localization of these messages is OPTIONAL. These messages are
50 $ identified by the following:
52 $ MESSAGES xx-yy WILL ONLY APPEAR IN THE DT ERRORLOG FILE
54 $ 3. Messages that should not be localized.
56 $ These messages are identified by the following:
58 $ DO NOT TRANSLATE or CHANGE or LOCALIZE MESSAGES xx-yy
60 $ ***** END (NOTE FOR MESSAGE CATALOG TRANSLATORS) *****
62 $ *****************************************************************************
65 $ ****** Module: motif.c ****(developer comment only)********
67 $ Messages 1 - 4 are used by the "numeric base" option button. Bin is
68 $ short for Binary, Oct is short for Octal, Dec is short for Decimal and
69 $ Hex is short for Hexidecimal. Keep these to 3 to 4 characters!
76 $ Messages 5 - 7 are used by the "display mode" option button. Eng is an
77 $ abbreviation for Engineering, Fix is an abbreviation for Fixed, and
78 $ Sci is an abbreviation for Scientific. Keep these to 3 characters.
86 $ Messages 9 - 11 refer to the three modes the Calculator can operate in.
87 $ They are listed in the "Mode" option button.
93 $ Message 12 - This is the title to the Calculator.
97 $ Messages 13 - 30 are the labels in the menubar pulldown menus and the
98 $ mnemonic's (the letter that gets underlined for keyboard access) that
101 $ Message 13 is the mnemonic for Message 14
105 15 Registri di memoria
108 $ Message 17 is the mnemonic for Message 18
113 $ Message 19 is the mnemonic for Message 20
118 $ Message 21 is the mnemonic for Message 22
123 $ Message 23 is the mnemonic for Message 24
128 $ Message 25 is the mnemonic for Message 26
133 $ Message 27 is the mnemonic for Message 28
138 $ Message 29 is the mnemonic for Message 30
141 30 Informazioni sulla Calcolatrice
143 $ Message 31 is an simple error message.
145 31 Impossibile accedere allo schermo.\n
147 $ Messages 32 and 33 are button labels for dialog boxes.
152 $ Message 34 is an simple error message.
154 34 Impossibile aprire il file della sessione.
156 $ Message 35 - Gets put in the "Functions" popup when no functions have been
157 $ defined by the users.
159 35 Nessuna funzione definita
161 $ Message 36 and 37 are titles to two types of dialogs.
164 37 Richiesta di conferma
166 $ Message 38 and 39 are another label for the Help pulldown menu.
167 $ Message 38 is the mnemonic for Message 39
172 $ 40 - This is the mnemonic for the 'Memory Registers...' option on
173 $ the Option menu pulldown. (message 15 set 2)
177 $ 41 - This is the mnemonic for the 'ASCII Convert...' option on the Option
178 $ menu pulldown. (message 16 set 2)
182 $ 42 - This is the mnemonic for the 'Enter Function...' option on the Option
183 $ menu pulldown. (message 143 set 3)
187 $ 43 - This is the mnemonic for the 'Enter Constant...' option on the Option
188 $ menu pulldown. (message 142 set 3)
192 $ 44 - This is the mnemonic for the 'Exit' option on the Option
193 $ menu pulldown. (message 403 set 3)
197 $ 45 - This is the mnemonic for the 'Financial Registers' option on the Option
198 $ menu pulldown. (message 138 set 3)
202 $ 46 - This is the title for the popup menu.
204 46 Menu della Calcolatrice
206 $ Used as the title, In Asian languages labels need to be different e
207 $ from the menu label.
212 $ ****** Module: text.c ****(developer comment only)********
214 $ NOTE: there is no Message 1 - 4.
216 $ Messages 5-47 are what gets displayed on each of the calculator keys.
222 $ Message 8 - Int is short for integer.
226 $ Message 9 - Frac is short for fraction.
230 $ Message 10 - Abs is short for absolute value.
234 $ Message 11 - Exp is short for exponent.
245 $ Message 19 - Sqrt is short for square root.
251 $ Message 22 - Bsp is short for backspace.
255 $ Message 23 - Clr is short for clear.
283 $ Messages 48-51 tell the user what mode they are in.
290 $ Messages 52-94 are what gets put on the keys when the user presses the 'Keys'
291 $ key. These are the keyboard keys which provide the given function. These are
292 $ also known as keyboard accelerators. These keys directly correspond to
293 $ Messages 5-47. (i.e 5 maps to 52, 6 maps to 53, etc.).
299 $ Message 56 is "Control f"
301 $ Message 57 is "Control u"
315 $ Message 69 is "Control h"
319 $ Message 70 is "Delete"
346 $ Messages 95-98 are keyboard acclerators for Messages 48-51
352 $ NOTE: Messages 99 - 106 aren't used.
354 $ Messages 107-118 are dialog/popup titles.
364 116 Spostare a destra
366 118 Tipo trigonometrico
368 $ Messages 119-128 are the messages describing the Constants listed when the
369 $ Constant popup is brought up. NOTE: don't translate <=>
371 119 chilometri/h <=> miglia/h
372 120 radice quadrata di 2
375 123 centimetri <=> pollici
376 124 gradi in un radiante
379 127 kilojoule <=> unità termiche britanniche (BTU)
380 128 centimetri cubi <=> pollici cubi
382 $ Messages 132-143 are labels in the dialogs.
389 137 Registri di memoria
390 138 Registri finanziari
394 142 Inserire costante
395 143 Inserire funzione
397 $ NOTE: Message 144 - 147 aren't used.
399 $ Messages 148 is an error message used when the command line is used
400 $ improperly. %s tells the user what argument should come next.
404 $ Message 149 is an error message. %s is either the word "Function" or the
405 $ word "Constant" and %1d is a number 0-9. This message gets put in a
406 $ dialog when the user defines a new Function or Constant that already
407 $ exists and the dialog asks the user wheither to overwrite it. (Message 380)
409 149 La %s %1d esiste già .
411 $ Messages 153-162 are in the accuracy popup menu for the level of accuracy.
424 $ Messages 163-172 are in the Sto, Rcl, Exch popup menu's listing the registers.
437 $ Messages 188-191 are the numeric base types of operation.
444 $ Messages 192-194 are the display types.
450 $ Messages 195-197 are the trig. types.
456 $ Messages 198-201 are the modes of operation of the calculator.
463 $ Messages 203-207 are the labels in the Financial Registers dialog.
466 204 % di interesse annuo:
471 $ Messages 208-217 are the button labels of the financial portion of the
472 $ Calculator when it is in Financial mode.
477 $ Message 210 - Pv stands for Present Value.
482 $ Message 211 - Pmt stands for Payment
487 $ Message 212 - Fv stands for Future Value.
492 $ Message 213 means clear financial registers
493 $ Cancella registri finanziari
497 $ Message 214 means Compounding term
501 $ Message 215 means double-declining depreciation
502 $ Ammortamento a quote decrescenti
506 $ Message 216 means Straight-line depreciation
507 $ Ammortamento a quote costanti
511 $ Message 217 means Sum-of-the-years-digits depreciation
512 $ Ammortamento in base alla somma degli anni di prevista durata
516 $ Messages 218-226 are the button labels of the logical portion of the
517 $ Calculator when it is in Logical mode.
519 $ Message 218 means shift left
523 $ Message 219 means shift right
527 $ Message 220 means trunctate to the lower 16 bits.
531 $ Message 221 means trunctate to the lower 32 bits.
535 $ Message 222 means perform a logical OR
539 $ Message 223 means perform a logical AND
543 $ Message 224 means perform a logical NOT
547 $ Message 225 means perform a logical XOR
551 $ Message 226 means perform a logical XNOR
555 $ Messages 227-238 are the button labels of the Scientific portion of the
556 $ Calculator when it is in Scientific mode. This is the default mode.
559 $ Message 227 - Hyp is short for Hyperbolic
563 $ Message 228 - Inv is short for Inverse
576 $ Message 238 - Rand is short for Random
580 $ Messages 239-248 are the button labels of the financial portion of the
581 $ Calculator when it is in Financial mode when in "keys" mode. (i.e. button
585 $ Message 240 is 'Control r'
591 $ Message 245 is 'Control t'
593 $ Message 246 is 'Control d'
595 $ Message 247 is 'Control s'
597 $ Message 248 is 'Control y'
600 $ Messages 249-257 are the button labels of the logical portion of the
601 $ Calculator when it is in Logical mode when in "keys" mode. (i.e. button
614 $ Messages 258-269 are the button labels of the scientific portion of the
615 $ Calculator when it is in Scientific mode when in "keys" mode. (i.e. button
624 $ Message 264 is 'Control c'
626 $ Message 265 is 'Control s'
628 $ Message 266 is 'Control t'
634 $ Messages 270-272 are capitalized versions of the calculator MODES.
640 $ Messages 273-336 are error messages which will go into $HOME/.errorlog. They
641 $ are all math errors. Localization of these are optional.
643 273 *** SIGN NOT 0, +1 OR -1 IN MPADD2 CALL.\n
644 274 POSSIBLE OVERWRITING PROBLEM ***\n
645 275 *** N .LE. 1 IN CALL TO MPART1 ***\n
646 276 *** ABS(X) .GT. 1 IN CALL TO MPASIN ***\n
647 277 *** ERROR OCCURRED IN MPATAN, RESULT INCORRECT ***
648 278 *** B = %d ILLEGAL IN CALL TO MPCHK.\n
649 279 PERHAPS NOT SET BEFORE CALL TO AN MP ROUTINE ***\n
650 280 *** T = %d ILLEGAL IN CALL TO MPCHK.\n
651 282 *** M .LE. T IN CALL TO MPCHK.\n
652 284 *** B TOO LARGE IN CALL TO MPCHK ***\n
653 285 *** MXR TOO SMALL OR NOT SET TO DIM(R) BEFORE CALL
654 286 TO AN MP ROUTINE ***\n
655 287 *** MXR SHOULD BE AT LEAST %d*T + %d = %d ***\n
656 288 *** ACTUALLY MXR = %d, AND T= %d ***\n
657 289 *** FLOATING-POINT OVER/UNDER-FLOW IN MPCMD ***\n
658 290 *** FLOATING-POINT OVER/UNDER-FLOW IN MPCMR ***\n
659 291 *** J = 0 IN CALL TO MPCQM ***\n
660 292 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPDIV ***\n
661 293 *** OVERFLOW OCCURRED IN MPDIV ***\n
662 294 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPDIVI ***\n
663 295 *** INTEGER OVERFLOW IN MPDIVI, B TOO LARGE ***\n
664 296 *** OVERFLOW IN SUBROUTINE MPEXP ***\n
665 297 *** ERROR OCCURRED IN MPEXP, RESULT INCORRECT ***\n
666 298 *** ABS(X) NOT LESS THAN 1 IN CALL TO MPEXP1 ***\n
667 299 *** X NONPOSITIVE IN CALL TO MPLN ***\n
668 301 *** ERROR IN MPLN, ITERATION NOT CONVERGING ***\n
669 302 *** ABS(X) .GE. 1/B IN CALL TO MPLNS ***\n
670 303 *** ERROR OCCURRED IN MPLNS.\n
671 304 NEWTON ITERATION NOT CONVERGING PROPERLY ***\n
672 305 *** INTEGER OVERFLOW IN MPMUL, B TOO LARGE ***\n
673 306 *** ILLEGAL BASE B DIGIT IN CALL TO MPMUL.\n
674 307 POSSIBLE OVERWRITING PROBLEM ***\n
675 308 *** OVERFLOW OCCURRED IN MPMUL2 ***\n
676 309 *** INTEGER OVERFLOW IN MPMUL2, B TOO LARGE ***\n
677 310 *** ATTEMPTED DIVISION BY ZERO IN MPMULQ ***\n
678 311 POSSIBLE OVERWRITING PROBLEM ***\n
679 312 *** OVERFLOW OCCURRED IN MPNZR ***\n
680 313 *** CALL TO MPOVFL, MP OVERFLOW OCCURRED ***\n
681 314 *** ERROR OCCURRED IN MPPI, RESULT INCORRECT ***\n
682 315 *** ATTEMPT TO RAISE ZERO TO NEGATIVE POWER IN\n
683 316 CALL TO SUBROUTINE MPPWR ***\n
684 317 *** X NEGATIVE IN CALL TO MPPWR2 ***\n
685 318 *** X ZERO AND Y NONPOSITIVE IN CALL TO MPPWR2 ***\n
686 319 *** ATTEMPTED DIVISION BY ZERO IN CALL TO MPREC ***\n
687 320 *** ERROR OCCURRED IN MPREC, NEWTON ITERATION\n
688 321 NOT CONVERGING PROPERLY ***\n
689 322 *** OVERFLOW OCCURRED IN MPREC ***\n
690 323 *** N = 0 IN CALL TO MPROOT ***\n
691 324 *** ABS(N) TOO LARGE IN CALL TO MPROOT ***\n
692 325 *** X = 0 AND N NEGATIVE IN CALL TO MPROOT ***\n
693 326 *** X NEGATIVE AND N EVEN IN CALL TO MPROOT ***\n
694 327 *** ERROR OCCURRED IN MPROOT, NEWTON ITERATION\n
695 328 NOT CONVERGING PROPERLY ***\n
696 329 *** IDECPL .LE. 0 IN CALL TO MPSET ***\n
697 330 ITMAX2 TOO SMALL IN CALL TO MPSET ***\n
698 331 *** INCREASE ITMAX2 AND DIMENSIONS OF MP ARRAYS \n
699 332 TO AT LEAST %d ***\n
700 333 *** ERROR OCCURRED IN MPSIN, RESULT INCORRECT ***\n
701 334 *** ABS(X) .GT. 1 IN CALL TO MPSIN1 ***\n
702 335 *** X NEGATIVE IN CALL TO SUBROUTINE MPSQRT ***\n
703 336 *** TAN(X) TOO LARGE IN CALL TO MPTAN ***\n
705 $ Messages 337-343 are error messages from the command line options.
706 $ They also will only show up in the errorlog.
708 337 Calcolatrice: -a richiede un valore compreso tra 0 e 9.\n
710 $ Message 338 only goes to the errorlog file
712 338 Calcolatrice: Le cifre decimali devono essere comprese tra 0 e 9\nVerrà usato il valore predefinito: 2.\n
713 339 Calcolatrice: La base deve essere binaria, ottale, decimale o esadecimale.\nVerrà usata l'opzione predefinita: decimale.\n
715 $ Message 340 - %s is the invalid display mode the user supplied.
716 $ This goes to $HOME/.dt/errorlog only.
718 340 Calcolatrice: Modalità del display non valido [%s]\n
720 $ Message 341 - %s is the invalid mode the user supplied.
721 $ This goes to $HOME/.dt/errorlog only.
723 341 Calcolatrice: Modalità non valida [%s]\nVerrà impostata la modalità predefinita: scientifica\n
725 $ Message 342 - %s is the invalid trig. mode the user supplied.
726 $ This goes to $HOME/.dt/errorlog only.
728 342 Calcolatrice: Modalità trigonometrica non valida [%s].\n
729 343 Calcolatrice: File di sessione non valido.\n
731 $ NOTE: no Messages 344 through 350
733 $ Message 351 is a label in the ASCII convert dialog.
737 $ Message 352 is the title of the ASCII convert dialog.
741 $ Messages 353-355 are the Trigonometric types (abbreviations).
747 $ Messages 356-358 are the usage messages.
748 $ Don't translate dtcalc, -a, -m, -b, -no_menu_bar -? -notation -trig or
751 356 Calcolatrice (dtcalc) Versione 1.%1d\n\n
752 357 Sintassi: dtcalc [-a decimali] [-m modo] [-b base] [-no_menu_bar] [-?]\n
753 358 \t [-notation notazione_display] [-trig tipo_trigonometrico] [-session file_sessione]\n
755 $ Messages 359 and 360 not used
757 $ Messages 361 - 363 are button labels
764 $ Message 365 - 369 not used
766 $ Messages 370 - 372 get put under the Calculator display when the
767 $ corresponding calculator key is pressed, CLR is short for clear, HYP is
768 $ short for Hyperbolic, and INV is short for Inverse.
773 373 Valore della costante errato
774 374 Numero della costante errato.
775 375 Numero della funzione errato.
777 $ Message 376 not used.
779 377 La costante non è stata modificata.
780 378 Errore nella sequenza di numeri
781 379 Errore nella sequenza di operandi
782 380 Si desidera sostituirla?
783 381 Il valore deve essere compreso tra 0 e 9
785 $ Message 382 not used.
789 385 Impossibile salvare i valori predefiniti.\n
791 $ NOTE: Messages 386 - 402 are not used.
795 $ Messages 452-478 are the actual characters that the keyboard accelerators
796 $ map to. These are the keyboard keys which provide the given function.
797 $ For example: Message 5 is the label of the Functions key, Message 52 is
798 $ the label of the Functions key when the "keys" button is pressed, and
799 $ finally Message 452 is the character (i.e. 'F') that the calculator uses
800 $ to represent the Functions key so if the user had a "function string" which
801 $ included 'F' the calculator know that the 'F' represents the Function key.
803 $ Message 452 - the Functions key.
807 $ Message 453 - the Constants key.
811 $ Message 454 - the Keys key.
815 $ Message 455 - the Int (integer) key.
819 $ Message 456 - the Frac (fraction) key.
820 $ \006 is "Control f"
824 $ Message 457 - the Abs (absolute value) key.
825 $ \025 is "Control u"
829 $ Message 458 - the Exp (exponent) key.
833 $ Message 459 - the accuracy key.
837 $ Message 460 - the Store key (memory register store)
841 $ Message 461 - the Recall key (memory register recall)
845 $ Message 462 - the Exchange key (memory register exchange)
849 $ Message 463 - the 1/x key
853 $ Message 464 - the x^2 key
857 $ Message 465 - the % key
861 $ Message 465 - the square root key
865 $ Message 467 - the Bsp (backspace) key.
866 $ \010 is "Control h"
870 $ Message 468 - the clear key.
871 $ Message 468 is "Delete" (Note: Message 513 is the same)
875 $ Message 469 - hex 'd' key
879 $ Message 470 - hex 'e' key
883 $ Message 471 - hex 'f' key
887 $ Message 472 - Change sign (i.e. +/-) key
891 $ Message 473 - hex 'a' key
895 $ Message 474 - hex 'b' key
899 $ Message 475 - hex 'c' key
903 $ Message 476 - multiplcation key
907 $ Message 477 - the quit key
911 $ NOTE: 478 and 479 are not used.
913 $ Messages 480-489 are the actual characters that the keyboard accelerators
914 $ map to when the calculator is in Financial mode. These are the keyboard
915 $ keys which provide the given function.
917 $ Message 480 - the Term key
921 $ Message 481 - the i%Yr (interest per year)
922 $ \022 is 'Control r'
926 $ Message 482 - the Pv (present value) key
930 $ Message 483 - the Pmt (payment) key
934 $ Message 484 - the Fv (future value) key
938 $ Message 485 - the clrgs (clear financial registers) key
942 $ Message 486 - the Ctrm (Compounding term) key
943 $ \024 is 'Control t'
947 $ Message 487 - the Ddb (Double-declining depreciation) key
948 $ \004 is 'Control d'
952 $ Message 488 - the Sln (Straight-line depreciation) key
953 $ \023 is 'Control s'
957 $ Message 489 - the Syd (Sum-of-the-years'-digits depreciation) key
958 $ \031 is 'Control y'
962 $ Messages 490-496 are the actual characters that the keyboard accelerators
963 $ map to when the calculator is in Logical mode. These are the keyboard
964 $ keys which provide the given function.
966 $ Message 490 - the &16 (truncate to 16 bits) key.
970 $ Message 491 - the &32 (truncate to 32 bits) key.
974 $ Message 492 - the OR key
978 $ Message 493 - the AND key
982 $ Message 494 - the NOT key
986 $ Message 495 - the XOR key
990 $ Message 496 - the XNOR key
994 $ NOTE 497 - 499 aren't used.
996 $ Messages 500-511 are the actual characters that the keyboard accelerators
997 $ map to when the calculator is in Scientific mode. These are the keyboard
998 $ keys which provide the given function.
1000 $ Message 500 - the Hyp (Hyperbolic) key
1004 $ Message 501 - the Inv (Inverse) key
1008 $ Message 502 - the e^x key
1012 $ Message 503 - the 10^x key
1016 $ Message 504 - the y^x key
1020 $ Message 505 - the x! key
1024 $ Message 506 - the Cos (cosine) key
1025 $ \003 is 'Control c'
1029 $ Message 507 - the Sin (sine) key
1030 $ \023 is 'Control s'
1034 $ Message 507 - the Tan (tangent) key
1035 $ \024 is 'Control t'
1039 $ Message 509 - the Ln key
1043 $ Message 510 - the Log key
1047 $ Message 510 - the Rand (random) key
1051 $ Message 512, 513 are HP's del - Clr when it finds an ITF keyboard.
1055 $ Message 513 is 'Clear Display' on HP boxes
1059 $ added now capability to Financial regs: change the payment per year
1060 $ The following messages (514 - 517) refect this new button.
1067 $ Used as the title, In Asian languages the dialog title needs to be different
1068 $ from the menu label.
1070 518 Registri finanziari
1073 $ ****** Module: help.c ****(developer comment only)********
1074 $ Message 1 is the title for the calculator help dialogs.
1075 1 Calcolatrice - Aiuto
1076 2 Selezionare un elemento della Calcolatrice.
1081 $ ****** Module: functions.c ****(developer comment only)********
1083 1 ERRORE: Calcolo non riuscito
1084 2 ERRORE: Nessuna soluzione
1085 3 ERRORE: Soluzioni multiple
1086 4 ERRORE: Periodo <= 0
1087 5 ERRORE: Periodi non validi
1088 6 ERRORE: Numero troppo grande
1089 7 Impossibile calcolare il 'Periodo composto'\nsenza un interesse diverso da zero,\nun valore attuale diverso da zero e\nun valore futuro diverso da zero.\n
1092 $ ****** Version Information ********
1093 $ DO NOT TRANSLATE THESE MESSAGES
1094 $ DO NOT CHANGE THESE MESSAGES
1095 $ DO NOT LOCALIZE THESE MESSAGES
1096 $ These messages are used for the version information.
1097 1 @(#)version_goes_here
1098 2 \n@(#)_DtMessage catalog source $XConsortium: dtcalc.msg /main/3 1995/11/08 12:40:45 rswiston $