#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright (C) 2016 Piotr Dymacz <piotr@dymacz.pl>
#
-# See file CREDITS for list of people who contributed to this
-# project.
+# (C) Copyright 2000-2006 Wolfgang Denk,
+# DENX Software Engineering, wd@denx.de.
#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
+# SPDX-License-Identifier: GPL-2.0
#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-VERSION = 1
-PATCHLEVEL = 1
-SUBLEVEL = 4
-EXTRAVERSION =
-U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-VERSION_FILE = include/version_autogenerated.h
-
-HOSTARCH := $(shell uname -m | \
- sed -e s/i.86/i386/ \
- -e s/sun4u/sparc64/ \
- -e s/arm.*/arm/ \
- -e s/sa110/arm/ \
- -e s/powerpc/ppc/ \
- -e s/macppc/ppc/)
-HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
- sed -e 's/\(cygwin\).*/cygwin/')
+VERSION = 1
+PATCHLEVEL = 1
+SUBLEVEL = 4
+EXTRAVERSION = -$(shell git rev-parse --short=8 HEAD)
+ISREPODIRTY = $(shell if git diff-files | read dummy; then echo 1; else echo 0; fi)
+VERSION_FILE = include/version_autogenerated.h
-export HOSTARCH HOSTOS
+MKCONFIG = $(BUILD_TOPDIR)/u-boot/mkconfig
+MKIMAGE = $(BUILD_TOPDIR)/u-boot/tools/mkimage
+LZMA = $(BUILD_TOPDIR)/host_util/lzma/lzma
-# Deal with colliding definitions from tcsh etc.
-VENDOR=
+# Show in version string if we are not building from clean repository
+ifeq ($(ISREPODIRTY),1)
+ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)"-dirty"
+else
+ U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)"-clean"
+endif
-#########################################################################
+# ===============================================================
-TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
-export TOPDIR
+TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
+export TOPDIR
-ifeq ($(COMPRESSED_UBOOT),1)
-COMPRESSED_UBOOT = 1
-export export COMPRESSED_UBOOT
+# Some variables passed as arguments in cmd
+ifneq ($(IMG_SIZE),)
+ CONFIG_MAX_UBOOT_SIZE = $(IMG_SIZE)
+ export CONFIG_MAX_UBOOT_SIZE
endif
-ifeq (include/config.mk,$(wildcard include/config.mk))
-# load ARCH, BOARD, and CPU configuration
-include include/config.mk
-export ARCH CPU BOARD VENDOR SOC
-ifndef CROSS_COMPILE
-ifeq ($(HOSTARCH),ppc)
-CROSS_COMPILE =
-else
-ifeq ($(ARCH),ppc)
-CROSS_COMPILE = powerpc-linux-
-endif
-ifeq ($(ARCH),arm)
-CROSS_COMPILE = arm-linux-
-endif
-ifeq ($(ARCH),i386)
-ifeq ($(HOSTARCH),i386)
-CROSS_COMPILE =
-else
-CROSS_COMPILE = i386-linux-
-endif
-endif
-ifeq ($(ARCH),mips)
-CROSS_COMPILE = mips-linux-
+ifeq ($(IMG_LZMA),1)
+ COMPRESSED_UBOOT = 1
+ export COMPRESSED_UBOOT
endif
-ifeq ($(ARCH),nios)
-CROSS_COMPILE = nios-elf-
-endif
-ifeq ($(ARCH),nios2)
-CROSS_COMPILE = nios2-elf-
-endif
-ifeq ($(ARCH),m68k)
-CROSS_COMPILE = m68k-elf-
+
+ifeq ($(IMG_RAM),1)
+ CONFIG_SKIP_LOWLEVEL_INIT = 1
+ export CONFIG_SKIP_LOWLEVEL_INIT
endif
-ifeq ($(ARCH),microblaze)
-CROSS_COMPILE = mb-
+
+ifneq ($(DEVICE_VENDOR),)
+ DEVICE_VENDOR = $(DEVICE_VENDOR)
+ export DEVICE_VENDOR
endif
-ifeq ($(ARCH),blackfin)
-CROSS_COMPILE = bfin-elf-
+
+# Never use LZMA compression
+# for a RAM version of image
+ifdef CONFIG_SKIP_LOWLEVEL_INIT
+ unexport COMPRESSED_UBOOT
+ COMPRESSED_UBOOT =
endif
+
+ifndef CROSS_COMPILE
+ $(error "CROSS_COMPILE is not defined!")
endif
+export CROSS_COMPILE
+
+ifndef STAGING_DIR
+ $(error "STAGING_DIR is not defined!")
endif
+export STAGING_DIR
-export CROSS_COMPILE
+# Endianness
+ifndef ENDIANNESS
+ ENDIANNESS=-EB
+endif
+export ENDIANNESS
+
+# =======================
+# CUSTOM HELPER FUNCTIONS
+# =======================
+
+define echo_green
+ echo -e "\e[92m$(1)\e[0m"
+endef
+
+define echo_red
+ echo -e "\e[91m$(1)\e[0m"
+endef
+
+define echo_yellow
+ echo -e "\e[93m$(1)\e[0m"
+endef
+
+define ih_name
+U-Boot $(strip $(subst ",,$(U_BOOT_VERSION)))
+endef
+
+# $(1): name
+# $(2): path
+define echo_size
+@echo "$(1): `wc -c < $(strip $(2))` Bytes"
+endef
+
+# $(1): define name
+# $(2): define value
+define define_add
+ len=$$((5 - ($$(expr length $(1))/8))); \
+ tab=`printf '%*s' "$$len" | tr ' ' "\t"`; \
+ echo -ne "#define $(strip $(1))$${tab}" >> include/config.h; \
+ echo -e '$(strip $(2))' >> include/config.h
+endef
+
+# $(1): define name
+define undef_add
+ echo -e '#undef $(strip $(1))' >> include/config.h
+endef
+
+# $(1): path
+define include_add
+ echo -e '#include <$(strip $(1))>' >> include/config.h
+endef
+
+# $(1): name
+define board_name
+$(if $(1),$(strip $(1)),OEM/Unknown)
+endef
+
+# $(1): size
+define flash_size
+$(if $(1),$(strip $(1)),4)
+endef
+
+# $(1): vendor, board name/model
+# $(2): hostname
+# $(3): default FLASH size in MB
+# $(4): reset button GPIO number
+# $(5): 1 if reset button is active low
+# $(6): SOC_TYPE
+define config_init
+ $(call echo_green,Preparing configuration for target: $@)
+ echo
+
+ $(call echo_yellow, Device vendor/model:\t$(call board_name,$(1)))
+ $(if $(DEVICE_VENDOR), \
+ $(call echo_yellow, Custom recovery web:\tyes ($(DEVICE_VENDOR))), \
+ $(call echo_yellow, Custom recovery web:\tno) \
+ )
+
+ $(if $(CONFIG_MAX_UBOOT_SIZE), \
+ $(call echo_yellow, Image size limit:\t$$(($(CONFIG_MAX_UBOOT_SIZE) / 1024)) KB),
+ $(call echo_yellow, Image size limit:\tnot specified)
+ )
+
+ $(call echo_yellow, Default FLASH size:\t$(call flash_size,$(3)) MB)
+
+ $(if $(4),
+ $(call echo_yellow, GPIO reset button:\t$(strip $(4))), \
+ $(call echo_yellow, GPIO reset button:\tnot specified) \
+ )
+
+ $(if $(filter $(5),1),
+ $(call echo_yellow, Button active low:\tyes), \
+ $(call echo_yellow, Button active low:\tno) \
+ )
+
+ $(if $(filter $(COMPRESSED_UBOOT),1), \
+ $(call echo_yellow, LZMA compression:\tyes), \
+ $(call echo_yellow, LZMA compression:\tno) \
+ )
+
+ $(if $(filter $(CONFIG_SKIP_LOWLEVEL_INIT),1), \
+ $(call echo_yellow, RAM-loadable only:\tyes), \
+ $(call echo_yellow, RAM-loadable only:\tno) \
+ )
+
+ $(if $(2),$(call define_add,CONFIG_HOSTNAME,u-boot_$(strip $(2))))
+
+ $(if $(4),$(call define_add,CONFIG_GPIO_RESET_BTN,$(strip $(4))))
+ $(if $(filter $(5),1),$(call define_add,CONFIG_GPIO_RESET_BTN_ACTIVE_LOW,1))
+ $(if $(CONFIG_MAX_UBOOT_SIZE), \
+ $(call define_add,CONFIG_MAX_UBOOT_SIZE,$(CONFIG_MAX_UBOOT_SIZE))
+ $(call define_add,CONFIG_MAX_UBOOT_SIZE_HEX,$(shell printf '0x%X' $(CONFIG_MAX_UBOOT_SIZE)))
+ )
+
+ $(if $(filter $(CONFIG_SKIP_LOWLEVEL_INIT),1), \
+ $(call define_add,CONFIG_SKIP_LOWLEVEL_INIT,1) \
+ )
+ $(if $(filter $(CONFIG_SKIP_LOWLEVEL_INIT),1), \
+ $(call undef_add,COMPRESSED_UBOOT) \
+ )
+
+ $(if $(6), \
+ $(call define_add,SOC_TYPE,$(6)) \
+ )
+
+ $(call define_add,CONFIG_BOARD_CUSTOM_STRING,$(call board_name,$(1)))
+ $(call define_add,CONFIG_DEFAULT_FLASH_SIZE_IN_MB,$(call flash_size,$(3)))
+
+ echo
+endef
+
+# ===============================================================
+
+# First, check if configuration was done
+ifneq (include/config.mk, $(wildcard include/config.mk))
+all install u-boot u-boot.srec depend dep:
+ $(error "System was not configured!")
+else
+# Load ARCH, BOARD, and CPU configuration
+include include/config.mk
+export ARCH CPU BOARD VENDOR SOC
-# load other configuration
+# Load other configuration
include $(TOPDIR)/config.mk
-
-#########################################################################
+# ===============================================================
# U-Boot objects....order is important (i.e. start must be first)
-OBJS = cpu/$(CPU)/start.o
-
-ifeq ($(COMPRESSED_UBOOT),1)
-OBJS_BOOTSTRAP = cpu/$(CPU)/start_bootstrap.o
-endif
+OBJS = cpu/$(CPU)/start.o
LIBS = lib_generic/libgeneric.a
LIBS += common/libcommon.a
-LIBS += board/$(BOARDDIR)/lib$(BOARD).a
-LIBS += cpu/$(CPU)/lib$(CPU).a
-
-ifdef SOC
-LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
-endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += drivers/libdrivers.a
LIBS += net/libnet.a
LIBS += rtc/librtc.a
-LIBS += httpd/libhttpd.a
LIBS += $(BOARDLIBS)
-ifeq ($(COMPRESSED_UBOOT),1)
-LIBS_BOOTSTRAP = lib_bootstrap/libbootstrap.a
-LIBS_BOOTSTRAP += board/$(BOARDDIR)/lib$(BOARD).a
-LIBS_BOOTSTRAP += cpu/$(CPU)/lib$(CPU).a
-LIBS_BOOTSTRAP += cpu/$(CPU)/$(SOC)/lib$(SOC).a
+LIBS_SHARED = board/$(BOARDDIR)/lib$(BOARD).a
+LIBS_SHARED += httpd/libhttpd.a
+ifdef SOC
+ LIBS_SHARED += cpu/$(CPU)/$(SOC)/lib$(SOC).a
endif
+LIBS_SHARED += cpu/$(CPU)/lib$(CPU).a
-.PHONY : $(LIBS)
-
-ifeq ($(COMPRESSED_UBOOT),1)
-.PHONY : $(LIBS_BOOTSTRAP)
+ifdef COMPRESSED_UBOOT
+ OBJS_BOOTSTRAP = cpu/$(CPU)/start_bootstrap.o
+ LIBS_BOOTSTRAP = lib_bootstrap/libbootstrap.a
+ PHONY_LIBS = $(LIBS_BOOTSTRAP) $(LIBS_SHARED)
+else
+ PHONY_LIBS = $(LIBS) $(LIBS_SHARED)
endif
+.PHONY: $(PHONY_LIBS)
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
-SUBDIRS = tools
+SUBDIRS = tools
-.PHONY : $(SUBDIRS)
+.PHONY: $(SUBDIRS)
-#########################################################################
-#########################################################################
+# ===============================================================
ALL = u-boot.srec u-boot.bin System.map
-ifeq ($(COMPRESSED_UBOOT),1)
-all: $(ALL) tuboot.bin
+ifdef COMPRESSED_UBOOT
+all: $(ALL) tuboot.bin
else
-all: $(ALL)
+all: $(ALL) u-boot.img
endif
-u-boot.hex: u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
+u-boot.hex: u-boot
+ $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
-u-boot.srec: u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
+u-boot.srec: u-boot
+ $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
-u-boot.bin: u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+u-boot.bin: u-boot
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-u-boot.img: u-boot.bin
- ./tools/mkimage -A $(ARCH) -T firmware -C none \
- -a $(TEXT_BASE) -e 0 \
- -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
- sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
- -d $< $@
+u-boot.img: u-boot.bin
+ @echo
+ $(call echo_green,Preparing regular U-Boot image $@...)
+ $(MKIMAGE) -A $(ARCH) -T firmware -C none -a $(TEXT_BASE) \
+ -e 0 -n '$(call ih_name)' -d $< $@
-u-boot.dis: u-boot
- $(OBJDUMP) -d $< > $@
+u-boot.dis: u-boot
+ $(OBJDUMP) -d $< > $@
-u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
- -Map u-boot.map -o u-boot
+u-boot: fsdata depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LIBS_SHARED) $(LDSCRIPT)
+ UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) $(LIBS_SHARED) | \
+ sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p' | \
+ sort | uniq`; \
+ $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
+ --start-group $(LIBS) $(LIBS_SHARED) \
+ --end-group $(PLATFORM_LIBS) \
+ -Map u-boot.map -o u-boot
+
+$(LIBS_SHARED):
+ $(MAKE) -C `dirname $@`
$(LIBS):
- $(MAKE) -C `dirname $@`
+ $(MAKE) -C `dirname $@`
$(SUBDIRS):
- $(MAKE) -C $@ all
-
-ifeq ($(COMPRESSED_UBOOT),1)
-LZMA = $(BUILD_TOPDIR)/host_util/lzma
-
-tuboot.bin: System.map bootstrap.bin u-boot.lzimg
- @cat bootstrap.bin > $@
- @cat u-boot.lzimg >> $@
-
-u-boot.lzimg: $(obj)u-boot.bin System.map
- @rm -rf u-boot.bin.lzma
- #$(LZMA) e $(obj)u-boot.bin u-boot.bin.lzma
- $(LZMA) --best --keep $(obj)u-boot.bin
- ./tools/mkimage -A mips -T firmware -C lzma \
- -a 0x$(shell grep "T _start" $(TOPDIR)/System.map | awk '{ printf "%s", $$1 }') \
- -e 0x$(shell grep "T _start" $(TOPDIR)/System.map | awk '{ printf "%s", $$1 }') \
- -n 'u-boot image' -d $(obj)u-boot.bin.lzma $@
-
-bootstrap.bin: bootstrap
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-bootstrap: depend version $(SUBDIRS) $(OBJS_BOOTSTRAP) $(LIBS_BOOTSTRAP) $(LDSCRIPT_BOOTSTRAP)
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBS_BOOTSTRAP) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- $(LD) $(LDFLAGS_BOOTSTRAP) $$UNDEF_SYM $(OBJS_BOOTSTRAP) \
- --start-group $(LIBS_BOOTSTRAP) --end-group $(PLATFORM_LIBS) \
- -Map bootstrap.map -o bootstrap
+ $(MAKE) -C $@ all
+
+# For LZMA compressed image
+ifdef COMPRESSED_UBOOT
+tuboot.bin: System.map bootstrap.bin u-boot.lzimg
+ @echo
+ $(call echo_green,Merging bootstrap.bin with u-boot.lzimg...)
+ $(call echo_size, Bootstrap size,bootstrap.bin)
+ $(call echo_size, LZMA image size,u-boot.lzimg)
+ @cat bootstrap.bin > $@
+ @cat u-boot.lzimg >> $@
+ $(call echo_size, Total image size,$@)
+
+u-boot.lzimg: lzma_host $(obj)u-boot.bin System.map
+ @echo
+ @rm -rf u-boot.bin.lzma
+ @$(call echo_green,Compressing U-Boot image $<...)
+ @$(LZMA) --best --keep $(obj)u-boot.bin
+ $(call echo_green,Preparing LZMA compressed U-Boot image $@...)
+ $(MKIMAGE) -A $(ARCH) -T firmware -C lzma \
+ -a 0x$(shell grep "T _start" $(TOPDIR)/System.map | \
+ awk '{ printf "%s", $$1 }') \
+ -e 0x$(shell grep "T _start" $(TOPDIR)/System.map | \
+ awk '{ printf "%s", $$1 }') \
+ -n '$(call ih_name)' -d $(obj)u-boot.bin.lzma $@
+
+bootstrap.bin: bootstrap
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+bootstrap: depend version $(SUBDIRS) $(OBJS_BOOTSTRAP) $(LIBS_BOOTSTRAP) $(LIBS_SHARED) $(LDSCRIPT_BOOTSTRAP)
+ UNDEF_SYM=`$(OBJDUMP) -x $(LIBS_BOOTSTRAP) | \
+ sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p' | \
+ sort | uniq`; \
+ $(LD) $(LDFLAGS_BOOTSTRAP) $$UNDEF_SYM $(OBJS_BOOTSTRAP) \
+ --start-group $(LIBS_BOOTSTRAP) $(LIBS_SHARED) \
+ --end-group $(PLATFORM_LIBS) \
+ -Map bootstrap.map -o bootstrap
$(LIBS_BOOTSTRAP):
- $(MAKE) -C `dirname $@`
-endif
+ $(MAKE) -C `dirname $@`
+
+lzma_host:
+ @echo
+ $(call echo_green,Building lzma host utility...)
+ $(MAKE) -C $(BUILD_TOPDIR)/host_util/lzma -f makefile.gcc all
+endif # ifdef COMPRESSED_UBOOT
version:
- @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
- echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
- echo "\"" >> $(VERSION_FILE)
+ @echo -n "#define U_BOOT_VERSION \"U-Boot $(U_BOOT_VERSION)\"" > $(VERSION_FILE)
-gdbtools:
- $(MAKE) -C tools/gdb || exit 1
+fsdata:
+ $(call echo_green,Preparing web server files...)
+ @echo
+ cd httpd && ./vendors/makefsdatac $(DEVICE_VENDOR)
depend dep:
- @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
-
-tags:
- ctags -w `find $(SUBDIRS) include \
- lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
- net disk rtc dtt drivers drivers/sk98lin common \
- \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
-
-etags:
- etags -a `find $(SUBDIRS) include \
- lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
- net disk rtc dtt drivers drivers/sk98lin common \
- \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
-
-System.map: u-boot
- @$(NM) $< | \
- grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
- sort > System.map
-
-#########################################################################
-else
-all install u-boot u-boot.srec depend dep:
- @echo "System not configured - see README" >&2
- @ exit 1
-endif
+ @for dir in $(SUBDIRS); do $(MAKE) -C $$dir .depend; done
-#########################################################################
+System.map: u-boot
+ @$(NM) $< | \
+ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
+ sort > System.map
+endif # include/config.mk
+
+# =====================
+# COMMON/SHARED TARGETS
+# =====================
unconfig:
+ @$(call echo_green,Removing configuration...)
@rm -f include/config.h include/config.mk board/*/config.tmp
-#========================================================================
-# MIPS
-#========================================================================
-#########################################################################
-## MIPS32 AR7100 (24K)
-#########################################################################
-common_config :
+config_common:
@ >include/config.h
-
-ifdef CONFIG_BOOTDELAY
- @echo "#define CONFIG_BOOTDELAY "$(CONFIG_BOOTDELAY) >> include/config.h
-endif
-
-ifdef CFG_PLL_FREQ
- @echo "#define CFG_PLL_FREQ "$(CFG_PLL_FREQ) >> include/config.h
-endif
-
- @echo "#define CONFIG_DELAY_TO_AUTORUN_HTTPD 3" >> include/config.h
- @echo "#define CONFIG_DELAY_TO_AUTORUN_CONSOLE 5" >> include/config.h
- @echo "#define CONFIG_DELAY_TO_AUTORUN_NETCONSOLE 7" >> include/config.h
-
- # max delay time for button pressing
- @echo "#define CONFIG_MAX_BUTTON_PRESSING 10" >> include/config.h
-
- # don't show info about console (in, out, err...)
- @echo "#define CFG_CONSOLE_INFO_QUIET" >> include/config.h
-
-hornet_common_config : common_config
- @echo "#define CONFIG_AR7240 1" >> include/config.h
- @echo "#define CONFIG_MACH_HORNET 1" >> include/config.h
- @echo "#define CONFIG_HORNET_1_1_WAR 1" >> include/config.h
- @echo "#define NEW_DDR_TAP_CAL 1" >> include/config.h
-
-wr703n_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-WR703N at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_WR703N_V1 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-WR703N\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-wr720n_v3_CH_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-WR720N v3 CH at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_WR720N_V3 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-WR720N v3 CH\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-wr710n_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-WR710N at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_WR710N_V1 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-WR710N\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr3020_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-MR3020 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_MR3020_V1 1" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WPS_LED_BIT 26" >> include/config.h
- @echo "#define GPIO_WPS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_BIT 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_ON 1" >> include/config.h
- @echo "#define GPIO_ETH_LED_BIT 17" >> include/config.h
- @echo "#define GPIO_ETH_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-MR3020\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr3040_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-MR3040 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_MR3040_V1V2 1" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_BIT 26" >> include/config.h
- @echo "#define GPIO_WLAN_LED_ON 0" >> include/config.h
- @echo "#define GPIO_ETH_LED_BIT 17" >> include/config.h
- @echo "#define GPIO_ETH_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-MR3040\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr10u_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-MR10U at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_MR10U_V1 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-MR10U\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr13u_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-MR13U at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_MR13U_V1 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-MR13U\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-wr740n_v4_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-WR740N v4 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_WR740N_V4 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_BIT 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_ON 1" >> include/config.h
- @echo "#define GPIO_LAN1_LED_BIT 14" >> include/config.h
- @echo "#define GPIO_LAN1_LED_ON 1" >> include/config.h
- @echo "#define GPIO_LAN2_LED_BIT 15" >> include/config.h
- @echo "#define GPIO_LAN2_LED_ON 1" >> include/config.h
- @echo "#define GPIO_LAN3_LED_BIT 16" >> include/config.h
- @echo "#define GPIO_LAN3_LED_ON 1" >> include/config.h
- @echo "#define GPIO_LAN4_LED_BIT 17" >> include/config.h
- @echo "#define GPIO_LAN4_LED_ON 0" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_BIT 13" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_ON 1" >> include/config.h
- @echo "#define GPIO_QSS_LED_BIT 1" >> include/config.h
- @echo "#define GPIO_QSS_LED_ON 1" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-WR74xN/D v4\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-mr3220_v2_config : unconfig hornet_common_config
- @echo '======= Configuring for TP-Link TL-MR3220 v2 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_MR3220_V2 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_BIT 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_ON 1" >> include/config.h
- @echo "#define GPIO_LAN1_LED_BIT 14" >> include/config.h
- @echo "#define GPIO_LAN1_LED_ON 1" >> include/config.h
- @echo "#define GPIO_LAN2_LED_BIT 15" >> include/config.h
- @echo "#define GPIO_LAN2_LED_ON 1" >> include/config.h
- @echo "#define GPIO_LAN3_LED_BIT 16" >> include/config.h
- @echo "#define GPIO_LAN3_LED_ON 1" >> include/config.h
- @echo "#define GPIO_LAN4_LED_BIT 17" >> include/config.h
- @echo "#define GPIO_LAN4_LED_ON 0" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_BIT 13" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_ON 1" >> include/config.h
- @echo "#define GPIO_QSS_LED_BIT 1" >> include/config.h
- @echo "#define GPIO_QSS_LED_ON 1" >> include/config.h
- @echo "#define GPIO_USB_LED_BIT 26" >> include/config.h
- @echo "#define GPIO_USB_LED_ON 1" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for TL-MR3220 v2\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-dir505_config : unconfig hornet_common_config
- @echo '======= Configuring for D-Link DIR-505 at:' `date` '======='
- @echo "#define CONFIG_FOR_DLINK_DIR505_A1 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
-
- # we will use WPS button instead of reset
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW 1" >> include/config.h
-
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for DIR-505\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-gs_oolite_v1_dev_config : unconfig hornet_common_config
- @echo '======= Configuring for GS-Oolite v1 with dev board at:' `date` '======='
- @echo "#define CONFIG_FOR_GS_OOLITE_V1_DEV 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 27" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WAN_LED_BIT 17" >> include/config.h
- @echo "#define GPIO_WAN_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN1_LED_BIT 13" >> include/config.h
- @echo "#define GPIO_LAN1_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN2_LED_BIT 15" >> include/config.h
- @echo "#define GPIO_LAN2_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 16" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for GS-Oolite v1\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-carambola2_config : unconfig hornet_common_config
- @echo '======= Configuring for 8devices Carambola 2 at:' `date` '======='
- @echo "#define CONFIG_FOR_8DEVICES_CARAMBOLA2 1" >> include/config.h
-
- # Carambola 2 uses uncompressed version
- @echo "#undef COMPRESSED_UBOOT" >> include/config.h
-
- # Carambola 2 uses 40 MHz oscillator
- @echo "#define CONFIG_40MHZ_XTAL_SUPPORT 1" >> include/config.h
-
- @echo "#define GPIO_WLAN_LED_BIT 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 11" >> include/config.h
-
- # Carambola 2 development board has RST button pulled up, so it is active at low
- @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW 1" >> include/config.h
-
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 16" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP121 (AR9331) U-Boot for CARAMBOLA2 v1\"" >> include/config.h
-
- @./mkconfig -a ap121 mips mips ap121 ar7240 ar7240
-
-wasp_common_config : common_config
- @echo "#define CONFIG_AR7240 1" >> include/config.h
- @echo "#define CONFIG_WASP 1" >> include/config.h
- @echo "#define CONFIG_WASP_SUPPORT 1" >> include/config.h
-
-wdr3600_43x0_config : unconfig wasp_common_config
- @echo '======= Configuring for TP-Link TL-WDR3600/43x0 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_WDR3600_WDR43X0_V1 1" >> include/config.h
- @echo "#define DDR2_32BIT_SUPPORT 1" >> include/config.h
- @echo "#define CFG_ATHRS17_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 1" >> include/config.h
- @echo "#define CFG_DUAL_PHY_SUPPORT 1" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 14" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_2G_LED_BIT 13" >> include/config.h
- @echo "#define GPIO_WLAN_2G_LED_ON 0" >> include/config.h
- @echo "#define GPIO_USB1_LED_BIT 11" >> include/config.h
- @echo "#define GPIO_USB1_LED_ON 0" >> include/config.h
- @echo "#define GPIO_USB2_LED_BIT 12" >> include/config.h
- @echo "#define GPIO_USB2_LED_ON 0" >> include/config.h
- @echo "#define GPIO_QSS_LED_BIT 15" >> include/config.h
- @echo "#define GPIO_QSS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 16" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW 1" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"DB120 (AR9344) U-Boot for TL-WDR3600/43x0\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-wdr3500_config : unconfig wasp_common_config
- @echo '======= Configuring for TP-Link TL-WDR3500 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_WDR3500_V1 1" >> include/config.h
- @echo "#define DDR2_32BIT_SUPPORT 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 2" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 14" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_2G_LED_BIT 13" >> include/config.h
- @echo "#define GPIO_WLAN_2G_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN1_LED_BIT 19" >> include/config.h
- @echo "#define GPIO_LAN1_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN2_LED_BIT 20" >> include/config.h
- @echo "#define GPIO_LAN2_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN3_LED_BIT 21" >> include/config.h
- @echo "#define GPIO_LAN3_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN4_LED_BIT 22" >> include/config.h
- @echo "#define GPIO_LAN4_LED_ON 0" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_BIT 18" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_ON 0" >> include/config.h
- @echo "#define GPIO_QSS_LED_BIT 15" >> include/config.h
- @echo "#define GPIO_QSS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_USB_LED_BIT 11" >> include/config.h
- @echo "#define GPIO_USB_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 16" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW 1" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 8" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"DB120 (AR9344) U-Boot for TL-WDR3500\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-mr3420_v2_config : unconfig wasp_common_config
- @echo '======= Configuring for TP-Link TL-MR3420 v2 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_MR3420_V2 1" >> include/config.h
- @echo "#define CONFIG_AP123 1" >> include/config.h
- @echo "#define DDR2_32BIT_SUPPORT 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 2" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 14" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_BIT 13" >> include/config.h
- @echo "#define GPIO_WLAN_LED_ON 0" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_BIT 18" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN1_LED_BIT 19" >> include/config.h
- @echo "#define GPIO_LAN1_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN2_LED_BIT 20" >> include/config.h
- @echo "#define GPIO_LAN2_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN3_LED_BIT 21" >> include/config.h
- @echo "#define GPIO_LAN3_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN4_LED_BIT 12" >> include/config.h
- @echo "#define GPIO_LAN4_LED_ON 0" >> include/config.h
- @echo "#define GPIO_USB_LED_BIT 11" >> include/config.h
- @echo "#define GPIO_USB_LED_ON 0" >> include/config.h
- @echo "#define GPIO_QSS_LED_BIT 15" >> include/config.h
- @echo "#define GPIO_QSS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 17" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW 1" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP123 (AR9341) U-Boot for TL-MR3420 v2\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-wr841n_v8_config : unconfig wasp_common_config
- @echo '======= Configuring for TP-Link TL-WR841N/D v8 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_WR841N_V8 1" >> include/config.h
- @echo "#define CONFIG_AP123 1" >> include/config.h
- @echo "#define DDR2_32BIT_SUPPORT 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 2" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 14" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_BIT 13" >> include/config.h
- @echo "#define GPIO_WLAN_LED_ON 0" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_BIT 18" >> include/config.h
- @echo "#define GPIO_INTERNET_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN1_LED_BIT 19" >> include/config.h
- @echo "#define GPIO_LAN1_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN2_LED_BIT 20" >> include/config.h
- @echo "#define GPIO_LAN2_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN3_LED_BIT 21" >> include/config.h
- @echo "#define GPIO_LAN3_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN4_LED_BIT 12" >> include/config.h
- @echo "#define GPIO_LAN4_LED_ON 0" >> include/config.h
- @echo "#define GPIO_QSS_LED_BIT 15" >> include/config.h
- @echo "#define GPIO_QSS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 17" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW 1" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP123 (AR9341) U-Boot for TL-WR841N/D v8\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-wa830re_v2_wa801nd_v2_config : unconfig wasp_common_config
- @echo '======= Configuring for TP-Link TL-WA830RE/TL-WA801ND v2 at:' `date` '======='
- @echo "#define CONFIG_FOR_TPLINK_WA830RE_V2_WA801ND_V2 1" >> include/config.h
- @echo "#define CONFIG_AP123 1" >> include/config.h
- @echo "#define DDR2_32BIT_SUPPORT 1" >> include/config.h
- @echo "#define CFG_ATHRS27_PHY 1" >> include/config.h
- @echo "#define CFG_AG7240_NMACS 2" >> include/config.h
- @echo "#define GPIO_SYS_LED_BIT 14" >> include/config.h
- @echo "#define GPIO_SYS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_LAN_LED_BIT 18" >> include/config.h
- @echo "#define GPIO_LAN_LED_ON 0" >> include/config.h
- @echo "#define GPIO_WLAN_LED_BIT 13" >> include/config.h
- @echo "#define GPIO_WLAN_LED_ON 0" >> include/config.h
- @echo "#define GPIO_QSS_LED_BIT 15" >> include/config.h
- @echo "#define GPIO_QSS_LED_ON 0" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_BIT 17" >> include/config.h
- @echo "#define GPIO_RST_BUTTON_IS_ACTIVE_LOW 1" >> include/config.h
- @echo "#define DEFAULT_FLASH_SIZE_IN_MB 4" >> include/config.h
- @echo "#define BOARD_CUSTOM_STRING \"AP123 (AR9341) U-Boot for TL-WA830RE/TL-WA801ND v2\"" >> include/config.h
-
- @./mkconfig -a db12x mips mips db12x ar7240 ar7240
-
-#########################################################################
-#########################################################################
-#########################################################################
+ @$(call include_add,soc/soc_list.h)
+ @$(call define_add,CONFIG_BUILD_DATE_UTC,$(shell date -u +"%Y-%m-%d"))
+
+ar933x_common: unconfig config_common
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(call define_add,CFG_ATHRS26_PHY,1)
+ @$(call define_add,CONFIG_MACH_HORNET,1)
+
+ar934x_common: unconfig config_common
+ @$(call define_add,CONFIG_WASP,1)
+ @$(call define_add,CONFIG_WASP_SUPPORT,1)
+
+qca953x_common: unconfig config_common
+ @$(call define_add,CONFIG_ATHEROS,1)
+ @$(call define_add,CONFIG_MACH_QCA953x,1)
+
+lsdk_kernel:
+ @$(call define_add,CONFIG_LSDK_KERNEL,1)
+
+# =============================
+# TARGETS IN ALPHABETICAL ORDER
+# =============================
+
+8devices_carambola2: ar933x_common
+ @$(call config_init,8devices Carambola 2,carambola-v2,16,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_8DEVICES_CARAMBOLA2,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+alfa-network_ap121f: ar933x_common
+ @$(call config_init,ALFA NETWORK AP121F,ap121f,16,12,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_ALFA_NETWORK_AP121F,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+alfa-network_hornet-ub: ar933x_common
+ @$(call config_init,ALFA NETWORK Hornet-UB,hornet-ub,8,12,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_ALFA_NETWORK_HORNET_UB,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+comfast_cf-e314n: qca953x_common
+ @$(call config_init,Comfast CF-E314N,cf-e314n,16,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_COMFAST_CF_E314N,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+comfast_cf-e320n_v2: qca953x_common
+ @$(call config_init,Comfast CF-E320N v2,cf-e320n-v2,16,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_COMFAST_CF_E320N_V2,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+comfast_cf-e520n: qca953x_common
+ @$(call config_init,Comfast CF-E520N,cf-e520n,8,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_COMFAST_CF_E520N,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+comfast_cf-e530n: qca953x_common
+ @$(call config_init,Comfast CF-E530N,cf-e530n,8,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_COMFAST_CF_E530N,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+creatcomm-technology_d3321: ar933x_common
+ @$(call config_init,CreatComm Technology D3321,d3321,8,12,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_CREATCOMM_D3321,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+d-link_dir-505: ar933x_common
+ @$(call config_init,D-Link DIR-505,dir-505,8,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_DLINK_DIR505_A1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+dragino_v2_ms14: ar933x_common
+ @$(call config_init,Dragino v2 (MS14),dragino-v2,16,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_DRAGINO_V2,1)
+ @$(call define_add,WEBFAILSAFE_DISABLE_ART_UPGRADE,1)
+ @$(call define_add,WEBFAILSAFE_DISABLE_UBOOT_UPGRADE,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+engenius_ens202ext: ar934x_common
+ @$(call config_init,EnGenius ENS202EXT,ens202ext,16,1,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_ENGENIUS_ENS202EXT,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+gainstrong_oolite_v1_dev: ar933x_common
+ @$(call config_init,Gainstrong Oolite v1 (dev board),oolite-v1,16,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_GS_OOLITE_V1_DEV,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+gl-inet_6416: ar933x_common
+ @$(call config_init,GL.iNet 6416,glinet-6416,8,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_GL_INET,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+gl-inet_gl-ar150: ar933x_common
+ @$(call config_init,GL.iNet GL-AR150,gl-ar150,16,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_GL_AR150,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+gl-inet_gl-usb150: ar933x_common
+ @$(call config_init,GL.iNet GL-USB150,gl-usb150,16,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_GL_USB150,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+p2w_cpe505n: qca953x_common
+ @$(call config_init,P&W CPE505N,cpe505n,16,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_P2W_CPE505N,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+p2w_r602n: qca953x_common
+ @$(call config_init,P&W R602N,r602n,16,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_P2W_R602N,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-mr10u: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-MR10U,tl-mr10u,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR10U_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr13u: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-MR13U,tl-mr13u,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR13U_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr3020: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-MR3020,tl-mr3020,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3020_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr3040: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-MR3040,tl-mr3040,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3040_V1V2,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr3220_v2: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-MR3220 v2,tl-mr3220-v2,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3220_V2,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-mr3420_v2: ar934x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-MR3420 v2,tl-mr3420-v2,4,17,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3420_V2,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-mr3420_v3: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-MR3420 v3,tl-mr3420-v3,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR3420_V3,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-mr6400_v1v2: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-MR6400 v1/v2,tl-mr6400-v1v2,8,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_MR6400_V1V2,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CONFIG_QCA_ETH_PHY_SWAP,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wa801nd_v2: ar934x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WA801ND v2,tl-wa801nd-v2,4,17,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WA801ND_V2,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wa830re_v2: ar934x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WA830RE v2,tl-wa830re-v2,4,17,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WA830RE_V2,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wa850re_v2: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WA850RE v2,tl-wa850re-v2,4,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WA850RE_V2,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wdr3500: ar934x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WDR3500,tl-wdr3500,8,16,1,QCA_AR9344_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WDR3500_V1,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(call define_add,CONFIG_PCI,1)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wdr3600: ar934x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WDR3600,tl-wdr3600,8,16,1,QCA_AR9344_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WDR3600_V1,1)
+ @$(call define_add,CFG_ATHRS17_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,1)
+ @$(call define_add,CONFIG_PCI,1)
+ @$(call define_add,CFG_DUAL_PHY_SUPPORT,1)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wdr43x0: ar934x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WDR43x0,tl-wdr43x0,8,16,1,QCA_AR9344_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WDR43X0_V1,1)
+ @$(call define_add,CFG_ATHRS17_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,1)
+ @$(call define_add,CONFIG_PCI,1)
+ @$(call define_add,CFG_DUAL_PHY_SUPPORT,1)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wr703n: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR703N,tl-wr703n,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR703N_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-wr710n: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR710N,tl-wr710n,8,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR710N_V1,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-wr720n_v3_CN: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR720N v3 CN,tl-wr720n-v3,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR720N_V3,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-wr740n_v4: ar933x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR74xN/D v4,tl-wr74xnd-v4,4,11,,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR740N_V4,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+tp-link_tl-wr802n: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR802N,tl-wr802n,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR802N,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr810n: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR810N,tl-wr810n,8,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR810N,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr820n_CN: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR820N CN,tl-wr820n,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR820N_CN,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr841n_v10: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR841N/D v10,tl-wr841nd-v10,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR841N_V10,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr841n_v11: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR841N/D v11,tl-wr841nd-v11,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR841N_V11,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr841n_v8: ar934x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR841N/D v8,tl-wr841nd-v8,4,17,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR841N_V8,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+tp-link_tl-wr841n_v9: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR841N/D v9,tl-wr841nd-v9,4,12,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR841N_V9,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr842n_v3: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR842N/D v3,tl-wr842nd-v3,16,1,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR842N_V3,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+tp-link_tl-wr902ac_v1: qca953x_common lsdk_kernel
+ @$(call config_init,TP-Link TL-WR902AC,tl-wr902ac,8,3,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_TPLINK_WR902AC_V1,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(call define_add,CONFIG_PCI,1)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+unwireddevices_unwired-one: ar933x_common
+ @$(call config_init,Black Swift aka Unwired One,black-swift,16,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_BLACK_SWIFT_BOARD,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+village-telco_mesh-potato_v2: ar933x_common
+ @$(call config_init,Village Telco Mesh Potato 2,mesh-potato-v2,16,11,1,QCA_AR933X_SOC)
+ @$(call define_add,CONFIG_FOR_MESH_POTATO_V2,1)
+ @$(call define_add,WEBFAILSAFE_DISABLE_ART_UPGRADE,1)
+ @$(call define_add,WEBFAILSAFE_DISABLE_UBOOT_UPGRADE,1)
+ @$(MKCONFIG) -a ap121 mips mips ap121 ar7240 ar7240
+
+wallys_dr531: qca953x_common
+ @$(call config_init,Wallys DR531,dr531,8,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_WALLYS_DR531,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(call define_add,CONFIG_PCI,1)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+yuncore_ap90q: qca953x_common
+ @$(call config_init,YunCore AP90Q,ap90q,16,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_YUNCORE_AP90Q,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+yuncore_cpe830: qca953x_common
+ @$(call config_init,YunCore CPE830,cpe830,16,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_YUNCORE_CPE830,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+yuncore_cpe870: ar934x_common
+ @$(call config_init,YunCore CPE870,cpe870,8,16,1,QCA_AR9341_SOC)
+ @$(call define_add,CONFIG_FOR_YUNCORE_CPE870,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_AG7240_NMACS,2)
+ @$(MKCONFIG) -a db12x mips mips db12x ar7240 ar7240
+
+zbtlink_zbt-we1526: qca953x_common
+ @$(call config_init,Zbtlink ZBT-WE1526,zbt-we1526,16,17,1,QCA_QCA953X_SOC)
+ @$(call define_add,CONFIG_FOR_ZBTLINK_ZBT_WE1526,1)
+ @$(call define_add,CONFIG_USB,1)
+ @$(call define_add,CFG_ATHRS27_PHY,1)
+ @$(call define_add,CFG_ATH_GMAC_NMACS,2)
+ @$(MKCONFIG) -a ap143 mips mips ap143 ar7240 ar7240
+
+# =============
+# CLEAN TARGETS
+# =============
clean:
- @echo Making $@
+ @$(call echo_green,Making $@...)
@find . -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' -o -name .depend \) -print \
@rm -f lib_bootstrap/*.a
@rm -f bootstrap bootstrap.bin tuboot.bin u-boot.lzimg u-boot.bin.lzma bootstrap.map
-clobber: clean
- @echo Making $@
+lzma_host_clean:
+ @$(call echo_green,Removing lzma host utility...)
+ @$(MAKE) -C $(BUILD_TOPDIR)/host_util/lzma -f makefile.gcc clean
+
+clobber: clean
+ @$(call echo_green,Making $@...)
@find . -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
- @rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h
+ @rm -f $(OBJS) *.bak include/version_autogenerated.h
@rm -fr *.*~
@rm -f u-boot u-boot.map u-boot.hex $(ALL)
@rm -f tools/crc32.c tools/environment.c
- @rm -f cpu/mpc824x/bedbug_603e.c
@rm -f include/asm/proc include/asm/arch include/asm
-mrproper \
-distclean: clobber unconfig
-
-backup:
- F=`basename $(TOPDIR)` ; cd .. ; \
- gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
-
-#########################################################################
+distclean: clobber unconfig
projects / oweals / u-boot_mod.git / blobdiff