From: wdenk Date: Fri, 10 Dec 2004 11:40:40 +0000 (+0000) Subject: * Clean up CMC PU2 flash driver X-Git-Tag: LABEL_2006_03_12_0025~450 X-Git-Url: https://git.librecmc.org/?p=oweals%2Fu-boot.git;a=commitdiff_plain;h=25d6712a81b31fc5e4c4bddd81e9aaddb84e23be * Clean up CMC PU2 flash driver * Update MAINTAINERS file * Fix bug in MPC823 LCD driver --- diff --git a/CHANGELOG b/CHANGELOG index 217fa4eff3..5a26bfa99e 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,12 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Clean up CMC PU2 flash driver + +* Update MAINTAINERS file + +* Fix bug in MPC823 LCD driver + * Fix udelay() on AT91RM9200 for delays < 1 ms. * Enable long help on CMC PU2 board; diff --git a/MAINTAINERS b/MAINTAINERS index bd497b8b5a..a9e9a400bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -209,6 +209,13 @@ Frank Panno ep8260 MPC8260 +Peter Pearse + + Integrator/AP CM 926EJ-S, CM7x0T, CM9x0T + Integrator/CP CM 926EJ-S CM920T, CM940T, CM922T-XA10 + Versatile/AB ARM926EJ-S + Versatile/PB ARM926EJ-S + Denis Peter MIP405 PPC4xx diff --git a/Makefile b/Makefile index f2965f7886..e19a561e11 100644 --- a/Makefile +++ b/Makefile @@ -1197,12 +1197,12 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$ xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) -integratorcp_config : unconfig - @./mkconfig $(@:_config=) arm arm926ejs integratorcp - integratorap_config : unconfig @./mkconfig $(@:_config=) arm arm926ejs integratorap +integratorcp_config : unconfig + @./mkconfig $(@:_config=) arm arm926ejs integratorcp + lpd7a400_config \ lpd7a404_config: unconfig @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x diff --git a/README b/README index 294f8f704d..bb4c90abc4 100644 --- a/README +++ b/README @@ -1977,9 +1977,9 @@ Low Level (hardware related) configuration options: source code. It is used to make hardware dependant initializations. -- CFG_IMMR: Physical address of the Internal Memory Mapped - Register; DO NOT CHANGE! (11-4) - [MPC8xx systems only] +- CFG_IMMR: Physical address of the Internal Memory. + DO NOT CHANGE unless you know exactly what you're + doing! (11-4) [MPC8xx/82xx systems only] - CFG_INIT_RAM_ADDR: diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c index 9baa473bdf..6105d56649 100644 --- a/board/cmc_pu2/flash.c +++ b/board/cmc_pu2/flash.c @@ -37,11 +37,11 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ typedef unsigned short FLASH_PORT_WIDTH; typedef volatile unsigned short FLASH_PORT_WIDTHV; -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV #define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x02aa +#define FLASH_CYCLE2 0x02AA /*----------------------------------------------------------------------- * Functions @@ -96,9 +96,9 @@ static void flash_reset(flash_info_t *info) /* Put FLASH back in read mode */ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = (FPW)0x00FF00FF; /* Intel Read Mode */ + *base = (FPW)0x00FF; /* Intel Read Mode */ else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - *base = (FPW)0x00F000F0; /* AMD Read Mode */ + *base = (FPW)0x00F0; /* AMD Read Mode */ } /*----------------------------------------------------------------------- @@ -183,9 +183,9 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) /* Write auto select command: read Manufacturer ID */ /* Write auto select command sequence and test FLASH answer */ - addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */ + addr[FLASH_CYCLE1] = (FPW)0x00AA; /* for AMD, Intel ignores this */ + addr[FLASH_CYCLE2] = (FPW)0x0055; /* for AMD, Intel ignores this */ + addr[FLASH_CYCLE1] = (FPW)0x0090; /* selects Intel or AMD */ /* The manufacturer codes are only 1 byte, so just use 1 byte. * This works for any bus width and any FLASH device width. @@ -262,7 +262,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { FPWV *addr = (FPWV *)(info->start[0]); - int flag, prot, sect, l_sect; + int flag, prot, sect, ssect, l_sect; ulong start, now, last; printf ("flash_erase: first: %d last: %d\n", s_first, s_last); @@ -297,58 +297,70 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - l_sect = -1; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); - addr[0x0555] = 0x00AA; - addr[0x02AA] = 0x0055; - addr[0x0555] = 0x0080; - addr[0x0555] = 0x00AA; - addr[0x02AA] = 0x0055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (FPWV *)(info->start[sect]); - addr[0] = 0x0030; - l_sect = sect; + /* + * Start erase on unprotected sectors. + * Since the flash can erase multiple sectors with one command + * we take advantage of that by doing the erase in chunks of + * 3 sectors. + */ + for (sect = s_first; sect <= s_last; ) { + l_sect = -1; + + addr[FLASH_CYCLE1] = 0x00AA; + addr[FLASH_CYCLE2] = 0x0055; + addr[FLASH_CYCLE1] = 0x0080; + addr[FLASH_CYCLE1] = 0x00AA; + addr[FLASH_CYCLE2] = 0x0055; + + /* do the erase in chunks of at most 3 sectors */ + for (ssect = 0; ssect < 3; ssect++) { + if ((sect + ssect) > s_last) + break; + if (info->protect[sect + ssect] == 0) { /* not protected */ + addr = (FPWV *)(info->start[sect + ssect]); + addr[0] = 0x0030; + l_sect = sect + ssect; + } } + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + + start = get_timer (0); + last = start; + addr = (FPWV *)(info->start[l_sect]); + while ((addr[0] & 0x0080) != 0x0080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + addr = (FPWV *)info->start[0]; + addr[0] = 0x00F0; /* reset bank */ + sect += ssect; } /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (FPWV *)(info->start[l_sect]); - while ((addr[0] & 0x00000080) != 0x00000080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - DONE: /* reset to read mode */ addr = (FPWV *)info->start[0]; - addr[0] = 0x000000F0; /* reset bank */ + addr[0] = 0x00F0; /* reset bank */ printf (" done\n"); return 0; @@ -432,9 +444,9 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */ + base[FLASH_CYCLE1] = (FPW)0x00AA; /* unlock */ + base[FLASH_CYCLE2] = (FPW)0x0055; /* unlock */ + base[FLASH_CYCLE1] = (FPW)0x00A0; /* selects program mode */ *dest = data; /* start programming the data */ @@ -445,9 +457,9 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) start = get_timer (0); /* data polling for D7 */ - while ((*dest & (FPW)0x00000080) != (data & (FPW)0x00000080)) { + while ((*dest & (FPW)0x0080) != (data & (FPW)0x0080)) { if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *dest = (FPW)0x000000F0; /* reset bank */ + *dest = (FPW)0x00F0; /* reset bank */ return (1); } } diff --git a/common/lcd.c b/common/lcd.c index 85b44cad15..d3ecd925fc 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -620,6 +620,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) cmap = (ushort *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]); +#else +# error "Don't know location of color map" #endif /* Set color map */ @@ -631,9 +633,14 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) ( (cte.blue) & 0x001f) ; #ifdef CFG_INVERT_COLORS - *cmap++ = 0xffff - colreg; + *cmap = 0xffff - colreg; #else - *cmap++ = colreg; + *cmap = colreg; +#endif +#if defined(CONFIG_PXA250) + cmap++; +#elif defined(CONFIG_MPC823) + cmap--; #endif } } diff --git a/doc/README.NetConsole b/doc/README.NetConsole index aa13627659..3a572931c5 100644 --- a/doc/README.NetConsole +++ b/doc/README.NetConsole @@ -25,7 +25,7 @@ nc -u ${TARGET_IP} 6666 stty icanon echo intr ^C +++++++++++++++++++++++++++++++++++++++++++ -It turned out that 'netcat' couldn't be used to listen to broadcast +It turns out that 'netcat' cannot be used to listen to broadcast packets. We developed our own tool 'ncb' (see tools directory) that listens to broadcast packets on a given port and dumps them to the standard output. use it as follows: @@ -87,3 +87,6 @@ To browse the Linux network console output, use the 'netcat' tool invoked as follows: nc -u -l -p 6666 + +Note that unlike the U-Boot implementation the Linux netconsole is +unidirectional, i. e. you have console output only in Linux.