arm64: zynqmp: Use power header in zynqmp.dtsi

Use power header and add power-domains property.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index a498ff9af6235a7acbd57e25b738b70d3dce4e24..435b1e1ca6e6c7abf616f17ab9771b97cb73bfb2 100644 (file)
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -12,6 +12,7 @@
  * the License, or (at your option) any later version.
  */
 
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
 #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
 
 / {
@@ -286,6 +287,7 @@
                        interrupt-parent = <&gic>;
                        tx-fifo-depth = <0x40>;
                        rx-fifo-depth = <0x40>;
+                       power-domains = <&zynqmp_firmware PD_CAN_0>;
                };
 
                can1: can@ff070000 {
@@ -297,6 +299,7 @@
                        interrupt-parent = <&gic>;
                        tx-fifo-depth = <0x40>;
                        rx-fifo-depth = <0x40>;
+                       power-domains = <&zynqmp_firmware PD_CAN_1>;
                };
 
                cci: cci@fd6e0000 {
@@ -329,6 +332,7 @@
                        xlnx,bus-width = <128>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x14e8>;
+                       power-domains = <&zynqmp_firmware PD_GDMA>;
                };
 
                fpd_dma_chan2: dma@fd510000 {
@@ -341,6 +345,7 @@
                        xlnx,bus-width = <128>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x14e9>;
+                       power-domains = <&zynqmp_firmware PD_GDMA>;
                };
 
                fpd_dma_chan3: dma@fd520000 {
@@ -353,6 +358,7 @@
                        xlnx,bus-width = <128>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x14ea>;
+                       power-domains = <&zynqmp_firmware PD_GDMA>;
                };
 
                fpd_dma_chan4: dma@fd530000 {
@@ -365,6 +371,7 @@
                        xlnx,bus-width = <128>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x14eb>;
+                       power-domains = <&zynqmp_firmware PD_GDMA>;
                };
 
                fpd_dma_chan5: dma@fd540000 {
@@ -377,6 +384,7 @@
                        xlnx,bus-width = <128>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x14ec>;
+                       power-domains = <&zynqmp_firmware PD_GDMA>;
                };
 
                fpd_dma_chan6: dma@fd550000 {
@@ -389,6 +397,7 @@
                        xlnx,bus-width = <128>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x14ed>;
+                       power-domains = <&zynqmp_firmware PD_GDMA>;
                };
 
                fpd_dma_chan7: dma@fd560000 {
@@ -401,6 +410,7 @@
                        xlnx,bus-width = <128>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x14ee>;
+                       power-domains = <&zynqmp_firmware PD_GDMA>;
                };
 
                fpd_dma_chan8: dma@fd570000 {
@@ -413,6 +423,7 @@
                        xlnx,bus-width = <128>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x14ef>;
+                       power-domains = <&zynqmp_firmware PD_GDMA>;
                };
 
                gpu: gpu@fd4b0000 {
@@ -423,6 +434,7 @@
                        interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>;
                        interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1";
                        clock-names = "gpu", "gpu_pp0", "gpu_pp1";
+                       power-domains = <&zynqmp_firmware PD_GPU>;
                };
 
                /* LPDDMA default allows only secured access. inorder to enable
@@ -439,6 +451,7 @@
                        xlnx,bus-width = <64>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x868>;
+                       power-domains = <&zynqmp_firmware PD_ADMA>;
                };
 
                lpd_dma_chan2: dma@ffa90000 {
@@ -451,6 +464,7 @@
                        xlnx,bus-width = <64>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x869>;
+                       power-domains = <&zynqmp_firmware PD_ADMA>;
                };
 
                lpd_dma_chan3: dma@ffaa0000 {
@@ -463,6 +477,7 @@
                        xlnx,bus-width = <64>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x86a>;
+                       power-domains = <&zynqmp_firmware PD_ADMA>;
                };
 
                lpd_dma_chan4: dma@ffab0000 {
@@ -475,6 +490,7 @@
                        xlnx,bus-width = <64>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x86b>;
+                       power-domains = <&zynqmp_firmware PD_ADMA>;
                };
 
                lpd_dma_chan5: dma@ffac0000 {
@@ -487,6 +503,7 @@
                        xlnx,bus-width = <64>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x86c>;
+                       power-domains = <&zynqmp_firmware PD_ADMA>;
                };
 
                lpd_dma_chan6: dma@ffad0000 {
@@ -499,6 +516,7 @@
                        xlnx,bus-width = <64>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x86d>;
+                       power-domains = <&zynqmp_firmware PD_ADMA>;
                };
 
                lpd_dma_chan7: dma@ffae0000 {
@@ -511,6 +529,7 @@
                        xlnx,bus-width = <64>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x86e>;
+                       power-domains = <&zynqmp_firmware PD_ADMA>;
                };
 
                lpd_dma_chan8: dma@ffaf0000 {
@@ -523,6 +542,7 @@
                        xlnx,bus-width = <64>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x86f>;
+                       power-domains = <&zynqmp_firmware PD_ADMA>;
                };
 
                mc: memory-controller@fd070000 {
@@ -543,6 +563,7 @@
                        #size-cells = <0>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x872>;
+                       power-domains = <&zynqmp_firmware PD_NAND>;
                };
 
                gem0: ethernet@ff0b0000 {
@@ -556,6 +577,7 @@
                        #size-cells = <0>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x874>;
+                       power-domains = <&zynqmp_firmware PD_ETH_0>;
                };
 
                gem1: ethernet@ff0c0000 {
@@ -569,6 +591,7 @@
                        #size-cells = <0>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x875>;
+                       power-domains = <&zynqmp_firmware PD_ETH_1>;
                };
 
                gem2: ethernet@ff0d0000 {
@@ -582,6 +605,7 @@
                        #size-cells = <0>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x876>;
+                       power-domains = <&zynqmp_firmware PD_ETH_2>;
                };
 
                gem3: ethernet@ff0e0000 {
@@ -595,6 +619,7 @@
                        #size-cells = <0>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x877>;
+                       power-domains = <&zynqmp_firmware PD_ETH_3>;
                };
 
                gpio: gpio@ff0a0000 {
@@ -607,6 +632,7 @@
                        #interrupt-cells = <2>;
                        reg = <0x0 0xff0a0000 0x0 0x1000>;
                        gpio-controller;
+                       power-domains = <&zynqmp_firmware PD_GPIO>;
                };
 
                i2c0: i2c@ff020000 {
@@ -617,6 +643,7 @@
                        reg = <0x0 0xff020000 0x0 0x1000>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       power-domains = <&zynqmp_firmware PD_I2C_0>;
                };
 
                i2c1: i2c@ff030000 {
@@ -627,6 +654,7 @@
                        reg = <0x0 0xff030000 0x0 0x1000>;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       power-domains = <&zynqmp_firmware PD_I2C_1>;
                };
 
                ocm: memory-controller@ff960000 {
@@ -665,6 +693,7 @@
                                        <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
                                        <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
                                        <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+                       power-domains = <&zynqmp_firmware PD_PCIE>;
                        pcie_intc: legacy-interrupt-controller {
                                interrupt-controller;
                                #address-cells = <0>;
@@ -686,6 +715,7 @@
                        #size-cells = <0>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x873>;
+                       power-domains = <&zynqmp_firmware PD_QSPI>;
                };
 
                rtc: rtc@ffa60000 {
@@ -743,6 +773,7 @@
                        reg = <0x0 0xfd0c0000 0x0 0x2000>;
                        interrupt-parent = <&gic>;
                        interrupts = <0 133 4>;
+                       power-domains = <&zynqmp_firmware PD_SATA>;
                        #stream-id-cells = <4>;
                        iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
                                 <&smmu 0x4c2>, <&smmu 0x4c3>;
@@ -760,6 +791,7 @@
                        xlnx,device_id = <0>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x870>;
+                       power-domains = <&zynqmp_firmware PD_SD_0>;
                        nvmem-cells = <&soc_revision>;
                        nvmem-cell-names = "soc_revision";
                };
@@ -775,6 +807,7 @@
                        xlnx,device_id = <1>;
                        #stream-id-cells = <1>;
                        iommus = <&smmu 0x871>;
+                       power-domains = <&zynqmp_firmware PD_SD_1>;
                        nvmem-cells = <&soc_revision>;
                        nvmem-cell-names = "soc_revision";
                };
@@ -808,6 +841,7 @@
                        clock-names = "ref_clk", "pclk";
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       power-domains = <&zynqmp_firmware PD_SPI_0>;
                };
 
                spi1: spi@ff050000 {
@@ -819,6 +853,7 @@
                        clock-names = "ref_clk", "pclk";
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       power-domains = <&zynqmp_firmware PD_SPI_1>;
                };
 
                ttc0: timer@ff110000 {
@@ -828,6 +863,7 @@
                        interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
                        reg = <0x0 0xff110000 0x0 0x1000>;
                        timer-width = <32>;
+                       power-domains = <&zynqmp_firmware PD_TTC_0>;
                };
 
                ttc1: timer@ff120000 {
@@ -837,6 +873,7 @@
                        interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
                        reg = <0x0 0xff120000 0x0 0x1000>;
                        timer-width = <32>;
+                       power-domains = <&zynqmp_firmware PD_TTC_1>;
                };
 
                ttc2: timer@ff130000 {
@@ -846,6 +883,7 @@
                        interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
                        reg = <0x0 0xff130000 0x0 0x1000>;
                        timer-width = <32>;
+                       power-domains = <&zynqmp_firmware PD_TTC_2>;
                };
 
                ttc3: timer@ff140000 {
@@ -855,6 +893,7 @@
                        interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
                        reg = <0x0 0xff140000 0x0 0x1000>;
                        timer-width = <32>;
+                       power-domains = <&zynqmp_firmware PD_TTC_3>;
                };
 
                uart0: serial@ff000000 {
@@ -865,6 +904,7 @@
                        interrupts = <0 21 4>;
                        reg = <0x0 0xff000000 0x0 0x1000>;
                        clock-names = "uart_clk", "pclk";
+                       power-domains = <&zynqmp_firmware PD_UART_0>;
                };
 
                uart1: serial@ff010000 {
@@ -875,6 +915,7 @@
                        interrupts = <0 22 4>;
                        reg = <0x0 0xff010000 0x0 0x1000>;
                        clock-names = "uart_clk", "pclk";
+                       power-domains = <&zynqmp_firmware PD_UART_1>;
                };
 
                usb0: usb0@ff9d0000 {
@@ -884,6 +925,7 @@
                        compatible = "xlnx,zynqmp-dwc3";
                        reg = <0x0 0xff9d0000 0x0 0x100>;
                        clock-names = "bus_clk", "ref_clk";
+                       power-domains = <&zynqmp_firmware PD_USB_0>;
                        ranges;
                        nvmem-cells = <&soc_revision>;
                        nvmem-cell-names = "soc_revision";
@@ -909,6 +951,7 @@
                        compatible = "xlnx,zynqmp-dwc3";
                        reg = <0x0 0xff9e0000 0x0 0x100>;
                        clock-names = "bus_clk", "ref_clk";
+                       power-domains = <&zynqmp_firmware PD_USB_1>;
                        ranges;
                        nvmem-cells = <&soc_revision>;
                        nvmem-cell-names = "soc_revision";
@@ -1001,6 +1044,7 @@
                        interrupts = <0 122 4>;
                        interrupt-parent = <&gic>;
                        clock-names = "axi_clk";
+                       power-domains = <&zynqmp_firmware PD_DP>;
                        dma-channels = <6>;
                        #dma-cells = <1>;
                        dma-video0channel {