--- /dev/null
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+static char *get_reset_cause(char *);
+
+u32 get_cpu_rev(void)
+{
+ /* Temporally hard code the CPU rev to 0x73, rev 1.0. Fix it later */
+ return (MXC_CPU_MX7ULP << 12) | (1 << 4);
+}
+
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+ return get_cpu_rev();
+}
+#endif
+
+enum bt_mode get_boot_mode(void)
+{
+ u32 bt0_cfg = 0;
+
+ bt0_cfg = readl(CMC0_RBASE + 0x40);
+ bt0_cfg &= (BT0CFG_LPBOOT_MASK | BT0CFG_DUALBOOT_MASK);
+
+ if (!(bt0_cfg & BT0CFG_LPBOOT_MASK)) {
+ /* No low power boot */
+ if (bt0_cfg & BT0CFG_DUALBOOT_MASK)
+ return DUAL_BOOT;
+ else
+ return SINGLE_BOOT;
+ }
+
+ return LOW_POWER_BOOT;
+}
+
+int arch_cpu_init(void)
+{
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_POSTCLK_INIT
+int board_postclk_init(void)
+{
+ return 0;
+}
+#endif
+
+#define UNLOCK_WORD0 0xC520 /* 1st unlock word */
+#define UNLOCK_WORD1 0xD928 /* 2nd unlock word */
+#define REFRESH_WORD0 0xA602 /* 1st refresh word */
+#define REFRESH_WORD1 0xB480 /* 2nd refresh word */
+
+static void disable_wdog(u32 wdog_base)
+{
+ writel(UNLOCK_WORD0, (wdog_base + 0x04));
+ writel(UNLOCK_WORD1, (wdog_base + 0x04));
+ writel(0x0, (wdog_base + 0x0C)); /* Set WIN to 0 */
+ writel(0x400, (wdog_base + 0x08)); /* Set timeout to default 0x400 */
+ writel(0x120, (wdog_base + 0x00)); /* Disable it and set update */
+
+ writel(REFRESH_WORD0, (wdog_base + 0x04)); /* Refresh the CNT */
+ writel(REFRESH_WORD1, (wdog_base + 0x04));
+}
+
+void init_wdog(void)
+{
+ /*
+ * ROM will configure WDOG1, disable it or enable it
+ * depending on FUSE. The update bit is set for reconfigurable.
+ * We have to use unlock sequence to reconfigure it.
+ * WDOG2 is not touched by ROM, so it will have default value
+ * which is enabled. We can directly configure it.
+ * To simplify the codes, we still use same reconfigure
+ * process as WDOG1. Because the update bit is not set for
+ * WDOG2, the unlock sequence won't take effect really.
+ * It actually directly configure the wdog.
+ * In this function, we will disable both WDOG1 and WDOG2,
+ * and set update bit for both. So that kernel can reconfigure them.
+ */
+ disable_wdog(WDG1_RBASE);
+ disable_wdog(WDG2_RBASE);
+}
+
+
+void s_init(void)
+{
+ /* Disable wdog */
+ init_wdog();
+
+ /* clock configuration. */
+ clock_init();
+
+ return;
+}
+
+#ifndef CONFIG_ULP_WATCHDOG
+void reset_cpu(ulong addr)
+{
+ setbits_le32(SIM0_RBASE, SIM_SOPT1_A7_SW_RESET);
+ while (1)
+ ;
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+const char *get_imx_type(u32 imxtype)
+{
+ return "7ULP";
+}
+
+int print_cpuinfo(void)
+{
+ u32 cpurev;
+ char cause[18];
+
+ cpurev = get_cpu_rev();
+
+ printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n",
+ get_imx_type((cpurev & 0xFF000) >> 12),
+ (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0,
+ mxc_get_clock(MXC_ARM_CLK) / 1000000);
+
+ printf("Reset cause: %s\n", get_reset_cause(cause));
+
+ printf("Boot mode: ");
+ switch (get_boot_mode()) {
+ case LOW_POWER_BOOT:
+ printf("Low power boot\n");
+ break;
+ case DUAL_BOOT:
+ printf("Dual boot\n");
+ break;
+ case SINGLE_BOOT:
+ default:
+ printf("Single boot\n");
+ break;
+ }
+
+ return 0;
+}
+#endif
+
+#define CMC_SRS_TAMPER (1 << 31)
+#define CMC_SRS_SECURITY (1 << 30)
+#define CMC_SRS_TZWDG (1 << 29)
+#define CMC_SRS_JTAG_RST (1 << 28)
+#define CMC_SRS_CORE1 (1 << 16)
+#define CMC_SRS_LOCKUP (1 << 15)
+#define CMC_SRS_SW (1 << 14)
+#define CMC_SRS_WDG (1 << 13)
+#define CMC_SRS_PIN_RESET (1 << 8)
+#define CMC_SRS_WARM (1 << 4)
+#define CMC_SRS_HVD (1 << 3)
+#define CMC_SRS_LVD (1 << 2)
+#define CMC_SRS_POR (1 << 1)
+#define CMC_SRS_WUP (1 << 0)
+
+static u32 reset_cause = -1;
+
+static char *get_reset_cause(char *ret)
+{
+ u32 cause1, cause = 0, srs = 0;
+ u32 *reg_ssrs = (u32 *)(SRC_BASE_ADDR + 0x28);
+ u32 *reg_srs = (u32 *)(SRC_BASE_ADDR + 0x20);
+
+ if (!ret)
+ return "null";
+
+ srs = readl(reg_srs);
+ cause1 = readl(reg_ssrs);
+ writel(cause1, reg_ssrs);
+
+ reset_cause = cause1;
+
+ cause = cause1 & (CMC_SRS_POR | CMC_SRS_WUP | CMC_SRS_WARM);
+
+ switch (cause) {
+ case CMC_SRS_POR:
+ sprintf(ret, "%s", "POR");
+ break;
+ case CMC_SRS_WUP:
+ sprintf(ret, "%s", "WUP");
+ break;
+ case CMC_SRS_WARM:
+ cause = cause1 & (CMC_SRS_WDG | CMC_SRS_SW |
+ CMC_SRS_JTAG_RST);
+ switch (cause) {
+ case CMC_SRS_WDG:
+ sprintf(ret, "%s", "WARM-WDG");
+ break;
+ case CMC_SRS_SW:
+ sprintf(ret, "%s", "WARM-SW");
+ break;
+ case CMC_SRS_JTAG_RST:
+ sprintf(ret, "%s", "WARM-JTAG");
+ break;
+ default:
+ sprintf(ret, "%s", "WARM-UNKN");
+ break;
+ }
+ break;
+ default:
+ sprintf(ret, "%s-%X", "UNKN", cause1);
+ break;
+ }
+
+ debug("[%X] SRS[%X] %X - ", cause1, srs, srs^cause1);
+ return ret;
+}
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+__weak int board_mmc_get_env_dev(int devno)
+{
+ return CONFIG_SYS_MMC_ENV_DEV;
+}
+
+int mmc_get_env_dev(void)
+{
+ int devno = 0;
+ u32 bt1_cfg = 0;
+
+ /* If not boot from sd/mmc, use default value */
+ if (get_boot_mode() == LOW_POWER_BOOT)
+ return CONFIG_SYS_MMC_ENV_DEV;
+
+ bt1_cfg = readl(CMC1_RBASE + 0x40);
+ devno = (bt1_cfg >> 9) & 0x7;
+
+ return board_mmc_get_env_dev(devno);
+}
+#endif
projects / oweals / u-boot.git / commitdiff