X-Git-Url: https://git.librecmc.org/?p=oweals%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fcolibri_imx6.h;h=0a52a701c628c0f65096fa9c760d7ba534dbfc05;hp=95b5a14b595c93d94d829fad9cb06932efa1fb4a;hb=1099b2abef35c3c887f6afac1a8ef18c7924d5d2;hpb=f0fcab6f8e11cee6d6b81a08fbfc641f6fcce0ec

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 95b5a14b59..0a52a701c6 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -8,6 +8,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/stringify.h>
+
 #include "mx6_common.h"
 
 #undef CONFIG_DISPLAY_BOARDINFO
@@ -43,14 +45,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 
-/* Network */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RMII
-#define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_MXC_PHYADDR		1
-#define CONFIG_TFTP_TSIZE
-
 /* USB Configs */
 /* Host */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
@@ -76,10 +70,6 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Command definition */
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FLASH
 
 #undef CONFIG_IPADDR
 #define CONFIG_IPADDR			192.168.10.2
@@ -110,6 +100,17 @@
 	"imx6dl-colibri-eval-v3.dtb fat 0 1;" \
 	"imx6dl-colibri-cam-eval-v3.dtb fat 0 1"
 
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=8a\0" \
+	"uboot_spl_blk=2\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+	"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
+
 #define EMMC_BOOTCMD \
 	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\
 		"rw,noatime rootfstype=ext4 " \
@@ -131,8 +132,6 @@
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x12100000\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
 	"kernel_addr_r=0x11000000\0" \
 	"pxefile_addr_r=0x17100000\0" \
 	"ramdisk_addr_r=0x12200000\0" \
@@ -153,7 +152,8 @@
 	BOOTENV \
 	"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
 		"usb start ; " \
-		"setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
+		"setenv stdout serial,vidconsole; " \
+		"setenv stdin serial,usbkbd\0" \
 	"boot_file=zImage\0" \
 	"console=ttymxc0\0" \
 	"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
@@ -163,6 +163,7 @@
 	"fdt_fixup=;\0" \
 	MEM_LAYOUT_ENV_SETTINGS \
 	NFS_BOOTCMD \
+	UBOOT_UPDATE \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \
@@ -187,10 +188,6 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		48
 
-#define CONFIG_SYS_MEMTEST_START	0x10000000
-#define CONFIG_SYS_MEMTEST_END		0x10010000
-#define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /* Physical Memory Map */
@@ -213,6 +210,4 @@
 #define CONFIG_SYS_MMC_ENV_PART		1
 #endif
 
-#define CONFIG_CMD_TIME
-
 #endif	/* __CONFIG_H */