X-Git-Url: https://git.librecmc.org/?p=oweals%2Fu-boot.git;a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=21df1c415f58897caa6575c14057612669d6a9d1;hp=a623ef5743ac1aee20dd04834c91d3c6de3c069b;hb=c27178ba3649f539c9f1890ea147f4c5415f63b5;hpb=994bb86fc90aa9edff5a6685b28b44e2f77de196 diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a623ef5743..21df1c415f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -340,6 +340,34 @@ config SYS_CACHELINE_SIZE default 64 if SYS_CACHE_SHIFT_6 default 32 if SYS_CACHE_SHIFT_5 +choice + prompt "Select the ARM data write cache policy" + default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || \ + TARGET_BCMNSP || CPU_PXA || RZA1 + default SYS_ARM_CACHE_WRITEBACK + +config SYS_ARM_CACHE_WRITEBACK + bool "Write-back (WB)" + help + A write updates the cache only and marks the cache line as dirty. + External memory is updated only when the line is evicted or explicitly + cleaned. + +config SYS_ARM_CACHE_WRITETHROUGH + bool "Write-through (WT)" + help + A write updates both the cache and the external memory system. + This does not mark the cache line as dirty. + +config SYS_ARM_CACHE_WRITEALLOC + bool "Write allocation (WA)" + help + A cache line is allocated on a write miss. This means that executing a + store instruction on the processor might cause a burst read to occur. + There is a linefill to obtain the data for the cache line, before the + write is performed. +endchoice + config ARCH_CPU_INIT bool "Enable ARCH_CPU_INIT" help @@ -475,7 +503,7 @@ config TPL_USE_ARCH_MEMSET config SET_STACK_SIZE bool "Enable an option to set max stack size that can be used" - default y if ARCH_VERSAL || ARCH_ZYNQMP + default y if ARCH_VERSAL || ARCH_ZYNQMP || ARCH_ZYNQ help This will enable an option to set max stack size that can be used by U-Boot. @@ -484,6 +512,7 @@ config STACK_SIZE hex "Define max stack size that can be used by U-Boot" depends on SET_STACK_SIZE default 0x4000000 if ARCH_VERSAL || ARCH_ZYNQMP + default 0x1000000 if ARCH_ZYNQ help Define Max stack size that can be used by U-Boot so that the initrd_high will be calculated as base stack pointer minus this @@ -524,7 +553,7 @@ config ARCH_DAVINCI help Support for TI's DaVinci platform. -config KIRKWOOD +config ARCH_KIRKWOOD bool "Marvell Kirkwood" select ARCH_MISC_INIT select BOARD_EARLY_INIT_F @@ -547,7 +576,7 @@ config TARGET_APF27 select CPU_ARM926EJS select SUPPORT_SPL -config ORION5X +config ARCH_ORION5X bool "Marvell Orion" select CPU_ARM926EJS @@ -598,15 +627,6 @@ config TARGET_X600 select PL011_SERIAL select SUPPORT_SPL -config TARGET_WOODBURN - bool "Support woodburn" - select CPU_ARM1136 - -config TARGET_WOODBURN_SD - bool "Support woodburn_sd" - select CPU_ARM1136 - select SUPPORT_SPL - config TARGET_FLEA3 bool "Support flea3" select CPU_ARM1136 @@ -633,6 +653,12 @@ config ARCH_BCM63158 select OF_CONTROL imply CMD_DM +config ARCH_BCM68360 + bool "Broadcom BCM68360 family" + select DM + select OF_CONTROL + imply CMD_DM + config ARCH_BCM6858 bool "Broadcom BCM6858 family" select DM @@ -765,6 +791,7 @@ config ARCH_OMAP2PLUS config ARCH_MESON bool "Amlogic Meson" imply DISTRO_DEFAULTS + imply DM_RNG help Support for the Meson SoC family developed by Amlogic Inc., targeted at media players and tablet computers. We currently @@ -772,7 +799,6 @@ config ARCH_MESON config ARCH_MEDIATEK bool "MediaTek SoCs" - select BINMAN select DM select OF_CONTROL select SPL_DM if SPL @@ -877,10 +903,13 @@ config ARCH_MX5 config ARCH_OWL bool "Actions Semi OWL SoCs" - select ARM64 select DM select DM_SERIAL + select OWL_SERIAL + select CLK + select CLK_OWL select OF_CONTROL + select SYS_RELOC_GD_ENV_ADDR imply CMD_DM config ARCH_QEMU @@ -993,6 +1022,8 @@ config ARCH_SUNXI select USB_KEYBOARD if DISTRO_DEFAULTS select USB_STORAGE if DISTRO_DEFAULTS select SPL_USE_TINY_PRINTF + select USE_PREBOOT + select SYS_RELOC_GD_ENV_ADDR imply CMD_DM imply CMD_GPT imply CMD_UBI if MTD_RAW_NAND @@ -1009,6 +1040,24 @@ config ARCH_SUNXI imply SPL_SERIAL_SUPPORT imply USB_GADGET +config ARCH_U8500 + bool "ST-Ericsson U8500 Series" + select CPU_V7A + select DM + select DM_GPIO + select DM_MMC if MMC + select DM_SERIAL + select DM_USB if USB + select OF_CONTROL + select SYSRESET + select TIMER + imply ARM_PL180_MMCI + imply DM_RTC + imply NOMADIK_MTU_TIMER + imply PL01X_SERIAL + imply RTC_PL031 + imply SYSRESET_SYSCON + config ARCH_VERSAL bool "Support Xilinx Versal Platform" select ARM64 @@ -1093,7 +1142,7 @@ config ARCH_ZYNQMP imply MP imply DM_USB_GADGET -config TEGRA +config ARCH_TEGRA bool "NVIDIA Tegra" imply DISTRO_DEFAULTS imply FAT_WRITE @@ -1113,11 +1162,21 @@ config TARGET_VEXPRESS64_JUNO bool "Support Versatile Express Juno Development Platform" select ARM64 select PL01X_SERIAL + select DM + select OF_CONTROL + select OF_BOARD + select CLK + select DM_SERIAL + select ARM_PSCI_FW + select PSCI_RESET + select DM + select BLK + select USB + select DM_USB config TARGET_LS2080A_EMU bool "Support ls2080a_emu" select ARCH_LS2080A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select FSL_DDR_SYNC_REFRESH @@ -1130,7 +1189,6 @@ config TARGET_LS2080A_EMU config TARGET_LS2080A_SIMU bool "Support ls2080a_simu" select ARCH_LS2080A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT @@ -1143,7 +1201,6 @@ config TARGET_LS2080A_SIMU config TARGET_LS1088AQDS bool "Support ls1088aqds" select ARCH_LS1088A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT @@ -1159,7 +1216,6 @@ config TARGET_LS1088AQDS config TARGET_LS2080AQDS bool "Support ls2080aqds" select ARCH_LS2080A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT @@ -1178,7 +1234,6 @@ config TARGET_LS2080AQDS config TARGET_LS2080ARDB bool "Support ls2080ardb" select ARCH_LS2080A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT @@ -1197,7 +1252,6 @@ config TARGET_LS2080ARDB config TARGET_LS2081ARDB bool "Support ls2081ardb" select ARCH_LS2080A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select BOARD_LATE_INIT @@ -1211,7 +1265,6 @@ config TARGET_LS2081ARDB config TARGET_LX2160ARDB bool "Support lx2160ardb" select ARCH_LX2160A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT @@ -1225,7 +1278,6 @@ config TARGET_LX2160ARDB config TARGET_LX2160AQDS bool "Support lx2160aqds" select ARCH_LX2160A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT @@ -1348,7 +1400,6 @@ config TARGET_LS1028AQDS select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT - select ARCH_MISC_INIT help Support for Freescale LS1028AQDS platform The LS1028A Development System (QDS) is a high-performance @@ -1361,6 +1412,7 @@ config TARGET_LS1028ARDB select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT + select BOARD_LATE_INIT help Support for Freescale LS1028ARDB platform The LS1028A Development System (RDB) is a high-performance @@ -1370,7 +1422,6 @@ config TARGET_LS1028ARDB config TARGET_LS1088ARDB bool "Support ls1088ardb" select ARCH_LS1088A - select ARCH_MISC_INIT select ARM64 select ARMV8_MULTIENTRY select ARCH_SUPPORT_TFABOOT @@ -1531,9 +1582,11 @@ config ARCH_UNIPHIER bool "Socionext UniPhier SoCs" select BOARD_LATE_INIT select DM + select DM_ETH select DM_GPIO select DM_I2C select DM_MMC + select DM_MTD select DM_RESET select DM_SERIAL select DM_USB @@ -1555,7 +1608,7 @@ config ARCH_UNIPHIER Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) -config STM32 +config ARCH_STM32 bool "Support STMicroelectronics STM32 MCU with cortex M" select CPU_V7M select DM @@ -1578,6 +1631,7 @@ config ARCH_STI config ARCH_STM32MP bool "Support STMicroelectronics STM32MP Socs with cortex A" select ARCH_MISC_INIT + select ARCH_SUPPORT_TFABOOT select BOARD_LATE_INIT select CLK select DM @@ -1611,6 +1665,7 @@ config ARCH_STM32MP config ARCH_ROCKCHIP bool "Support Rockchip SoCs" select BLK + select BINMAN if !ARM64 select DM select DM_GPIO select DM_I2C @@ -1659,6 +1714,10 @@ config TARGET_DURIAN Support for durian platform. It has 2GB Sdram, uart and pcie. +config TARGET_PRESIDIO_ASIC + bool "Support Cortina Presidio ASIC Platform" + select ARM64 + endchoice config ARCH_SUPPORT_TFABOOT @@ -1719,7 +1778,7 @@ source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" -source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig" +source "arch/arm/mach-lpc32xx/Kconfig" source "arch/arm/mach-mvebu/Kconfig" @@ -1779,6 +1838,8 @@ source "arch/arm/mach-sunxi/Kconfig" source "arch/arm/mach-tegra/Kconfig" +source "arch/arm/mach-u8500/Kconfig" + source "arch/arm/mach-uniphier/Kconfig" source "arch/arm/cpu/armv7/vf610/Kconfig" @@ -1805,9 +1866,11 @@ source "board/Marvell/gplugd/Kconfig" source "board/armadeus/apf27/Kconfig" source "board/armltd/vexpress/Kconfig" source "board/armltd/vexpress64/Kconfig" +source "board/cortina/presidio-asic/Kconfig" source "board/broadcom/bcm23550_w1d/Kconfig" source "board/broadcom/bcm28155_ap/Kconfig" source "board/broadcom/bcm963158/Kconfig" +source "board/broadcom/bcm968360bg/Kconfig" source "board/broadcom/bcm968580xref/Kconfig" source "board/broadcom/bcmcygnus/Kconfig" source "board/broadcom/bcmnsp/Kconfig" @@ -1851,12 +1914,10 @@ source "board/spear/spear600/Kconfig" source "board/spear/x600/Kconfig" source "board/st/stv0991/Kconfig" source "board/tcl/sl50/Kconfig" -source "board/ucRobotics/bubblegum_96/Kconfig" source "board/birdland/bav335x/Kconfig" source "board/toradex/colibri_pxa270/Kconfig" source "board/variscite/dart_6ul/Kconfig" source "board/vscom/baltos/Kconfig" -source "board/woodburn/Kconfig" source "board/xilinx/Kconfig" source "board/xilinx/zynq/Kconfig" source "board/xilinx/zynqmp/Kconfig"