X-Git-Url: https://git.librecmc.org/?p=oweals%2Fu-boot.git;a=blobdiff_plain;f=Makefile;h=9ca414e68d4d3970492cf3d8d9a328ef6240f693;hp=a4b1d1db52419dfe185c1b553f7cac3e18aee08b;hb=748ad078eefea2ee5a3c8e53ca46e9e93c2fc7f1;hpb=6d4a3ff2649faa2cf2739e332557f256cc34831e

diff --git a/Makefile b/Makefile
index a4b1d1db52..9ca414e68d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-VERSION = 2018
-PATCHLEVEL = 11
+VERSION = 2019
+PATCHLEVEL = 01
 SUBLEVEL =
 EXTRAVERSION =
 NAME =
@@ -443,7 +443,7 @@ defaultenv_h := include/generated/defaultenv_autogenerated.h
 
 no-dot-config-targets := clean clobber mrproper distclean \
 			 help %docs check% coccicheck \
-			 ubootversion backup tests
+			 ubootversion backup tests check qcheck
 
 config-targets := 0
 mixed-targets  := 0
@@ -534,7 +534,7 @@ include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
 	@# Otherwise, 'make silentoldconfig' would be invoked twice.
 	$(Q)touch include/config/auto.conf
 
-u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg: include/config.h FORCE
+u-boot.cfg spl/u-boot.cfg tpl/u-boot.cfg:
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf $(@)
 
 -include include/autoconf.mk
@@ -695,7 +695,6 @@ libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 libs-y += drivers/mtd/spi/
 libs-y += drivers/net/
 libs-y += drivers/net/phy/
-libs-y += drivers/pci/
 libs-y += drivers/power/ \
 	drivers/power/domain/ \
 	drivers/power/fuel_gauge/ \
@@ -713,8 +712,8 @@ libs-y += drivers/usb/dwc3/
 libs-y += drivers/usb/common/
 libs-y += drivers/usb/emul/
 libs-y += drivers/usb/eth/
-libs-y += drivers/usb/gadget/
-libs-y += drivers/usb/gadget/udc/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
 libs-y += drivers/usb/host/
 libs-y += drivers/usb/musb/
 libs-y += drivers/usb/musb-new/
@@ -725,8 +724,7 @@ libs-y += common/
 libs-y += env/
 libs-$(CONFIG_API) += api/
 libs-$(CONFIG_HAS_POST) += post/
-libs-y += test/
-libs-y += test/dm/
+libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
 libs-$(CONFIG_UT_ENV) += test/env/
 libs-$(CONFIG_UT_OVERLAY) += test/overlay/
 
@@ -895,7 +893,7 @@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E -p $(CONFIG_FIT_EXTERNAL_OFFSET) $@\
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
@@ -912,13 +910,92 @@ quiet_cmd_cfgcheck = CFGCHK  $2
 cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
 		$(srctree)/scripts/config_whitelist.txt $(srctree)
 
-all:		$(ALL-y) cfg
+all:		$(ALL-y)
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
-	@echo "===================== WARNING ======================"
-	@echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
-	@echo "(possibly in a subsequent patch in your series)"
-	@echo "before sending patches to the mailing list."
-	@echo "===================================================="
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+	@echo >&2 "(possibly in a subsequent patch in your series)"
+	@echo >&2 "before sending patches to the mailing list."
+	@echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_MMC),y)
+ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
+	@echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_USB),y)
+ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_USB. Please update"
+	@echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
+ifneq ($(CONFIG_DM_SCSI),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
+	@echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_PCI),y)
+ifneq ($(CONFIG_DM_PCI),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_PCI Please update"
+	@echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
+ifneq ($(CONFIG_DM_VIDEO),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
+	@echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_OF_EMBED),y)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+	@echo >&2 "be used for debugging purposes. Please use"
+	@echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+	@echo >&2 "See doc/README.fdt-control for more info."
+	@echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_SPI),y)
+ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
+	@echo >&2 "the board before v2019.04 for no dm conversion"
+	@echo >&2 "and v2019.07 for partially dm converted drivers."
+	@echo >&2 "Failure to update can lead to driver/board removal"
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_SPI_FLASH),y)
+ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
+	@echo >&2 "===================== WARNING ======================"
+	@echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
+	@echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+	@echo >&2 "Failure to update by the deadline may result in board removal."
+	@echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+	@echo >&2 "===================================================="
+endif
 endif
 	@# Check that this build does not use CONFIG options that we do not
 	@# know about unless they are in Kconfig. All the existing CONFIG
@@ -1078,6 +1155,9 @@ U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
 else
 ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
 U_BOOT_ITS := u-boot.its
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
 ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
 U_BOOT_ITS_DEPS += u-boot
 endif
@@ -1118,6 +1198,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
 	$(call if_changed,mkimage)
+	$(BOARD_SIZE_CHECK)
 
 u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
@@ -1173,6 +1254,11 @@ tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
 SPL: spl/u-boot-spl.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
+ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y)
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+
 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
 
@@ -1470,7 +1556,7 @@ ifneq ($(KBUILD_SRC),)
 endif
 
 # prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile cfg
 
 prepare1: prepare2 $(version_h) $(timestamp_h) \
                    include/config/auto.conf
@@ -1709,7 +1795,7 @@ distclean: mrproper
 		-o -name '.*.rej' -o -name '*%' -o -name 'core' \
 		-o -name '*.pyc' \) \
 		-type f -print | xargs rm -f
-	@rm -f boards.cfg
+	@rm -f boards.cfg CHANGELOG
 
 backup:
 	F=`basename $(srctree)` ; cd .. ; \
@@ -1727,6 +1813,7 @@ help:
 	@echo  'Test targets:'
 	@echo  ''
 	@echo  '  check           - Run all automated tests that use sandbox'
+	@echo  '  qcheck          - Run quick automated tests that use sandbox'
 	@echo  ''
 	@echo  'Other generic targets:'
 	@echo  '  all		  - Build all necessary images depending on configuration'
@@ -1769,6 +1856,9 @@ help:
 tests check:
 	$(srctree)/test/run
 
+qcheck:
+	$(srctree)/test/run quick
+
 # Documentation targets
 # ---------------------------------------------------------------------------
 DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \