+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Common SPI flash Interface
*
* Copyright (C) 2008 Atmel Corporation
* Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
*/
#ifndef _SPI_FLASH_H_
#include <dm.h> /* Because we dereference struct udevice here */
#include <linux/types.h>
+#include <linux/mtd/spi-nor.h>
-#ifndef CONFIG_SF_DEFAULT_SPEED
-# define CONFIG_SF_DEFAULT_SPEED 1000000
+/* by default ENV use the same parameters than SF command */
+#ifndef CONFIG_ENV_SPI_BUS
+# define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
#endif
-#ifndef CONFIG_SF_DEFAULT_MODE
-# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+#ifndef CONFIG_ENV_SPI_CS
+# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
#endif
-#ifndef CONFIG_SF_DEFAULT_CS
-# define CONFIG_SF_DEFAULT_CS 0
+#ifndef CONFIG_ENV_SPI_MAX_HZ
+# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
-#ifndef CONFIG_SF_DEFAULT_BUS
-# define CONFIG_SF_DEFAULT_BUS 0
+#ifndef CONFIG_ENV_SPI_MODE
+# define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#endif
struct spi_slave;
-/**
- * struct spi_flash - SPI flash structure
- *
- * @spi: SPI slave
- * @name: Name of SPI flash
- * @dual_flash: Indicates dual flash memories - dual stacked, parallel
- * @shift: Flash shift useful in dual parallel
- * @size: Total flash size
- * @page_size: Write (page) size
- * @sector_size: Sector size
- * @erase_size: Erase size
- * @bank_read_cmd: Bank read cmd
- * @bank_write_cmd: Bank write cmd
- * @bank_curr: Current flash bank
- * @poll_cmd: Poll cmd - for flash erase/program
- * @erase_cmd: Erase cmd 4K, 32K, 64K
- * @read_cmd: Read cmd - Array Fast, Extn read and quad read.
- * @write_cmd: Write cmd - page and quad program.
- * @dummy_byte: Dummy cycles for read operation.
- * @memory_map: Address of read-only SPI flash access
- * @read: Flash read ops: Read len bytes at offset into buf
- * Supported cmds: Fast Array Read
- * @write: Flash write ops: Write len bytes from buf into offset
- * Supported cmds: Page Program
- * @erase: Flash erase ops: Erase len bytes from offset
- * Supported cmds: Sector erase 4K, 32K, 64K
- * return 0 - Success, 1 - Failure
- */
-struct spi_flash {
-#ifdef CONFIG_DM_SPI_FLASH
- struct spi_slave *spi;
- struct udevice *dev;
-#else
- struct spi_slave *spi;
-#endif
- const char *name;
- u8 dual_flash;
- u8 shift;
-
- u32 size;
- u32 page_size;
- u32 sector_size;
- u32 erase_size;
-#ifdef CONFIG_SPI_FLASH_BAR
- u8 bank_read_cmd;
- u8 bank_write_cmd;
- u8 bank_curr;
-#endif
- u8 poll_cmd;
- u8 erase_cmd;
- u8 read_cmd;
- u8 write_cmd;
- u8 dummy_byte;
-
- void *memory_map;
-#ifndef CONFIG_DM_SPI_FLASH
- /*
- * These are not strictly needed for driver model, but keep them here
- * whilt the transition is in progress.
- *
- * Normally each driver would provide its own operations, but for
- * SPI flash most chips use the same algorithms. One approach is
- * to create a 'common' SPI flash device which knows how to talk
- * to most devices, and then allow other drivers to be used instead
- * if requird, perhaps with a way of scanning through the list to
- * find the driver that matches the device.
- */
- int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
- int (*write)(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
- int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
-#endif
-};
-
struct dm_spi_flash_ops {
int (*read)(struct udevice *dev, u32 offset, size_t len, void *buf);
int (*write)(struct udevice *dev, u32 offset, size_t len,
#define sf_get_ops(dev) ((struct dm_spi_flash_ops *)(dev)->driver->ops)
#ifdef CONFIG_DM_SPI_FLASH
+/**
+ * spi_flash_read_dm() - Read data from SPI flash
+ *
+ * @dev: SPI flash device
+ * @offset: Offset into device in bytes to read from
+ * @len: Number of bytes to read
+ * @buf: Buffer to put the data that is read
+ * @return 0 if OK, -ve on error
+ */
+int spi_flash_read_dm(struct udevice *dev, u32 offset, size_t len, void *buf);
+
+/**
+ * spi_flash_write_dm() - Write data to SPI flash
+ *
+ * @dev: SPI flash device
+ * @offset: Offset into device in bytes to write to
+ * @len: Number of bytes to write
+ * @buf: Buffer containing bytes to write
+ * @return 0 if OK, -ve on error
+ */
+int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len,
+ const void *buf);
+
+/**
+ * spi_flash_erase_dm() - Erase blocks of the SPI flash
+ *
+ * Note that @len must be a muiltiple of the flash sector size.
+ *
+ * @dev: SPI flash device
+ * @offset: Offset into device in bytes to start erasing
+ * @len: Number of bytes to erase
+ * @return 0 if OK, -ve on error
+ */
+int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len);
+
+/**
+ * spi_flash_std_probe() - Probe a SPI flash device
+ *
+ * This is the standard internal method for probing a SPI flash device to
+ * determine its type. It can be used in chip-specific drivers which need to
+ * do this, typically with of-platdata
+ *
+ * @dev: SPI-flash device to probe
+ * @return 0 if OK, -ve on error
+ */
+int spi_flash_std_probe(struct udevice *dev);
+
int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode,
struct udevice **devp);
/* Compatibility function - this is the old U-Boot API */
void spi_flash_free(struct spi_flash *flash);
-int spi_flash_remove(struct udevice *flash);
-
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
- size_t len, void *buf)
+ size_t len, void *buf)
{
- return sf_get_ops(flash->dev)->read(flash->dev, offset, len, buf);
+ return spi_flash_read_dm(flash->dev, offset, len, buf);
}
static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
- size_t len, const void *buf)
+ size_t len, const void *buf)
{
- return sf_get_ops(flash->dev)->write(flash->dev, offset, len, buf);
+ return spi_flash_write_dm(flash->dev, offset, len, buf);
}
static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
- size_t len)
+ size_t len)
{
- return sf_get_ops(flash->dev)->erase(flash->dev, offset, len);
+ return spi_flash_erase_dm(flash->dev, offset, len);
}
struct sandbox_state;
int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
- struct udevice *bus, int of_offset, const char *spec);
+ struct udevice *bus, ofnode node, const char *spec);
void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs);
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode);
-/**
- * Set up a new SPI flash from an fdt node
- *
- * @param blob Device tree blob
- * @param slave_node Pointer to this SPI slave node in the device tree
- * @param spi_node Cached pointer to the SPI interface this node belongs
- * to
- * @return 0 if ok, -1 on error
- */
-struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
- int spi_node);
-
void spi_flash_free(struct spi_flash *flash);
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
size_t len, void *buf)
{
- return flash->read(flash, offset, len, buf);
+ struct mtd_info *mtd = &flash->mtd;
+ size_t retlen;
+
+ return mtd->_read(mtd, offset, len, &retlen, buf);
}
static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
size_t len, const void *buf)
{
- return flash->write(flash, offset, len, buf);
+ struct mtd_info *mtd = &flash->mtd;
+ size_t retlen;
+
+ return mtd->_write(mtd, offset, len, &retlen, buf);
}
static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
size_t len)
{
- return flash->erase(flash, offset, len);
+ struct mtd_info *mtd = &flash->mtd;
+ struct erase_info instr;
+
+ if (offset % mtd->erasesize || len % mtd->erasesize) {
+ printf("SF: Erase offset/length not multiple of erase size\n");
+ return -EINVAL;
+ }
+
+ memset(&instr, 0, sizeof(instr));
+ instr.addr = offset;
+ instr.len = len;
+
+ return mtd->_erase(mtd, &instr);
}
#endif
-void spi_boot(void) __noreturn;
-void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
+static inline int spi_flash_protect(struct spi_flash *flash, u32 ofs, u32 len,
+ bool prot)
+{
+ if (!flash->flash_lock || !flash->flash_unlock)
+ return -EOPNOTSUPP;
+
+ if (prot)
+ return flash->flash_lock(flash, ofs, len);
+ else
+ return flash->flash_unlock(flash, ofs, len);
+}
#endif /* _SPI_FLASH_H_ */
projects / oweals / u-boot.git / blobdiff