#include <dm.h> /* Because we dereference struct udevice here */
#include <linux/types.h>
+#include <linux/mtd/spi-nor.h>
-#ifndef CONFIG_SF_DEFAULT_SPEED
-# define CONFIG_SF_DEFAULT_SPEED 1000000
+/* by default ENV use the same parameters than SF command */
+#ifndef CONFIG_ENV_SPI_BUS
+# define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
#endif
-#ifndef CONFIG_SF_DEFAULT_MODE
-# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+#ifndef CONFIG_ENV_SPI_CS
+# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
#endif
-#ifndef CONFIG_SF_DEFAULT_CS
-# define CONFIG_SF_DEFAULT_CS 0
+#ifndef CONFIG_ENV_SPI_MAX_HZ
+# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
-#ifndef CONFIG_SF_DEFAULT_BUS
-# define CONFIG_SF_DEFAULT_BUS 0
+#ifndef CONFIG_ENV_SPI_MODE
+# define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#endif
struct spi_slave;
-/**
- * struct spi_flash - SPI flash structure
- *
- * @spi: SPI slave
- * @dev: SPI flash device
- * @name: Name of SPI flash
- * @dual_flash: Indicates dual flash memories - dual stacked, parallel
- * @shift: Flash shift useful in dual parallel
- * @flags: Indication of spi flash flags
- * @size: Total flash size
- * @page_size: Write (page) size
- * @sector_size: Sector size
- * @erase_size: Erase size
- * @bank_read_cmd: Bank read cmd
- * @bank_write_cmd: Bank write cmd
- * @bank_curr: Current flash bank
- * @erase_cmd: Erase cmd 4K, 32K, 64K
- * @read_cmd: Read cmd - Array Fast, Extn read and quad read.
- * @write_cmd: Write cmd - page and quad program.
- * @dummy_byte: Dummy cycles for read operation.
- * @memory_map: Address of read-only SPI flash access
- * @flash_lock: lock a region of the SPI Flash
- * @flash_unlock: unlock a region of the SPI Flash
- * @flash_is_locked: check if a region of the SPI Flash is completely locked
- * @read: Flash read ops: Read len bytes at offset into buf
- * Supported cmds: Fast Array Read
- * @write: Flash write ops: Write len bytes from buf into offset
- * Supported cmds: Page Program
- * @erase: Flash erase ops: Erase len bytes from offset
- * Supported cmds: Sector erase 4K, 32K, 64K
- * return 0 - Success, 1 - Failure
- */
-struct spi_flash {
- struct spi_slave *spi;
-#ifdef CONFIG_DM_SPI_FLASH
- struct udevice *dev;
-#endif
- const char *name;
- u8 dual_flash;
- u8 shift;
- u16 flags;
-
- u32 size;
- u32 page_size;
- u32 sector_size;
- u32 erase_size;
-#ifdef CONFIG_SPI_FLASH_BAR
- u8 bank_read_cmd;
- u8 bank_write_cmd;
- u8 bank_curr;
-#endif
- u8 erase_cmd;
- u8 read_cmd;
- u8 write_cmd;
- u8 dummy_byte;
-
- void *memory_map;
-
- int (*flash_lock)(struct spi_flash *flash, u32 ofs, size_t len);
- int (*flash_unlock)(struct spi_flash *flash, u32 ofs, size_t len);
- int (*flash_is_locked)(struct spi_flash *flash, u32 ofs, size_t len);
-#ifndef CONFIG_DM_SPI_FLASH
- /*
- * These are not strictly needed for driver model, but keep them here
- * while the transition is in progress.
- *
- * Normally each driver would provide its own operations, but for
- * SPI flash most chips use the same algorithms. One approach is
- * to create a 'common' SPI flash device which knows how to talk
- * to most devices, and then allow other drivers to be used instead
- * if required, perhaps with a way of scanning through the list to
- * find the driver that matches the device.
- */
- int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
- int (*write)(struct spi_flash *flash, u32 offset, size_t len,
- const void *buf);
- int (*erase)(struct spi_flash *flash, u32 offset, size_t len);
-#endif
-};
-
struct dm_spi_flash_ops {
int (*read)(struct udevice *dev, u32 offset, size_t len, void *buf);
int (*write)(struct udevice *dev, u32 offset, size_t len,
const void *buf);
int (*erase)(struct udevice *dev, u32 offset, size_t len);
+ /**
+ * get_sw_write_prot() - Check state of software write-protect feature
+ *
+ * SPI flash chips can lock a region of the flash defined by a
+ * 'protected area'. This function checks if this protected area is
+ * defined.
+ *
+ * @dev: SPI flash device
+ * @return 0 if no region is write-protected, 1 if a region is
+ * write-protected, -ENOSYS if the driver does not implement this,
+ * other -ve value on error
+ */
+ int (*get_sw_write_prot)(struct udevice *dev);
};
/* Access the serial operations for a device */
*/
int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len);
+/**
+ * spl_flash_get_sw_write_prot() - Check state of software write-protect feature
+ *
+ * SPI flash chips can lock a region of the flash defined by a
+ * 'protected area'. This function checks if this protected area is
+ * defined.
+ *
+ * @dev: SPI flash device
+ * @return 0 if no region is write-protected, 1 if a region is
+ * write-protected, -ENOSYS if the driver does not implement this,
+ * other -ve value on error
+ */
+int spl_flash_get_sw_write_prot(struct udevice *dev);
+
int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode,
struct udevice **devp);
struct sandbox_state;
int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs,
- struct udevice *bus, int of_offset, const char *spec);
+ struct udevice *bus, ofnode node, const char *spec);
void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs);
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
size_t len, void *buf)
{
- return flash->read(flash, offset, len, buf);
+ struct mtd_info *mtd = &flash->mtd;
+ size_t retlen;
+
+ return mtd->_read(mtd, offset, len, &retlen, buf);
}
static inline int spi_flash_write(struct spi_flash *flash, u32 offset,
size_t len, const void *buf)
{
- return flash->write(flash, offset, len, buf);
+ struct mtd_info *mtd = &flash->mtd;
+ size_t retlen;
+
+ return mtd->_write(mtd, offset, len, &retlen, buf);
}
static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
size_t len)
{
- return flash->erase(flash, offset, len);
+ struct mtd_info *mtd = &flash->mtd;
+ struct erase_info instr;
+
+ if (offset % mtd->erasesize || len % mtd->erasesize) {
+ printf("SF: Erase offset/length not multiple of erase size\n");
+ return -EINVAL;
+ }
+
+ memset(&instr, 0, sizeof(instr));
+ instr.addr = offset;
+ instr.len = len;
+
+ return mtd->_erase(mtd, &instr);
}
#endif
projects / oweals / u-boot.git / blobdiff