#define _PHY_H
#include <dm.h>
+#include <linux/errno.h>
#include <linux/list.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/mdio.h>
+#include <log.h>
#include <phy_interface.h>
#define PHY_FIXED_ID 0xa5a55a5a
+#define PHY_NCSI_ID 0xbeefcafe
+
+/*
+ * There is no actual id for this.
+ * This is just a dummy id for gmii2rgmmi converter.
+ */
+#define PHY_GMII2RGMII_ID 0x5a5a5a5a
#define PHY_MAX_ADDR 32
u16 val);
struct list_head list;
+
+ /* driver private data */
+ ulong data;
};
struct phy_device {
{
struct mii_dev *bus = phydev->bus;
+ if (!bus || !bus->read) {
+ debug("%s: No bus configured\n", __func__);
+ return -1;
+ }
+
return bus->read(bus, phydev->addr, devad, regnum);
}
{
struct mii_dev *bus = phydev->bus;
+ if (!bus || !bus->read) {
+ debug("%s: No bus configured\n", __func__);
+ return -1;
+ }
+
return bus->write(bus, phydev->addr, devad, regnum, val);
}
#ifdef CONFIG_PHYLIB_10G
extern struct phy_driver gen10g_driver;
-/* For now, XGMII is the only 10G interface */
+/*
+ * List all 10G interfaces here, the assumption being that PHYs on these
+ * interfaces are C45
+ */
static inline int is_10g_interface(phy_interface_t interface)
{
- return interface == PHY_INTERFACE_MODE_XGMII;
+ return interface == PHY_INTERFACE_MODE_XGMII ||
+ interface == PHY_INTERFACE_MODE_USXGMII ||
+ interface == PHY_INTERFACE_MODE_XFI;
}
#endif
+/**
+ * phy_init() - Initializes the PHY drivers
+ *
+ * This function registers all available PHY drivers
+ *
+ * @return 0 if OK, -ve on error
+ */
int phy_init(void);
+
+/**
+ * phy_reset() - Resets the specified PHY
+ *
+ * Issues a reset of the PHY and waits for it to complete
+ *
+ * @phydev: PHY to reset
+ * @return 0 if OK, -ve on error
+ */
int phy_reset(struct phy_device *phydev);
+
+/**
+ * phy_find_by_mask() - Searches for a PHY on the specified MDIO bus
+ *
+ * The function checks the PHY addresses flagged in phy_mask and returns a
+ * phy_device pointer if it detects a PHY.
+ * This function should only be called if just one PHY is expected to be present
+ * in the set of addresses flagged in phy_mask. If multiple PHYs are present,
+ * it is undefined which of these PHYs is returned.
+ *
+ * @bus: MII/MDIO bus to scan
+ * @phy_mask: bitmap of PYH addresses to scan
+ * @interface: type of MAC-PHY interface
+ * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ */
struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask,
phy_interface_t interface);
+
#ifdef CONFIG_DM_ETH
+
+/**
+ * phy_connect_dev() - Associates the given pair of PHY and Ethernet devices
+ * @phydev: PHY device
+ * @dev: Ethernet device
+ */
void phy_connect_dev(struct phy_device *phydev, struct udevice *dev);
+
+/**
+ * phy_connect() - Creates a PHY device for the Ethernet interface
+ *
+ * Creates a PHY device for the PHY at the given address, if one doesn't exist
+ * already, and associates it with the Ethernet device.
+ * The function may be called with addr <= 0, in this case addr value is ignored
+ * and the bus is scanned to detect a PHY. Scanning should only be used if only
+ * one PHY is expected to be present on the MDIO bus, otherwise it is undefined
+ * which PHY is returned.
+ *
+ * @bus: MII/MDIO bus that hosts the PHY
+ * @addr: PHY address on MDIO bus
+ * @dev: Ethernet device to associate to the PHY
+ * @interface: type of MAC-PHY interface
+ * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ */
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct udevice *dev,
phy_interface_t interface);
+
static inline ofnode phy_get_ofnode(struct phy_device *phydev)
{
if (ofnode_valid(phydev->node))
return dev_ofnode(phydev->dev);
}
#else
+
+/**
+ * phy_connect_dev() - Associates the given pair of PHY and Ethernet devices
+ * @phydev: PHY device
+ * @dev: Ethernet device
+ */
void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev);
+
+/**
+ * phy_connect() - Creates a PHY device for the Ethernet interface
+ *
+ * Creates a PHY device for the PHY at the given address, if one doesn't exist
+ * already, and associates it with the Ethernet device.
+ * The function may be called with addr <= 0, in this case addr value is ignored
+ * and the bus is scanned to detect a PHY. Scanning should only be used if only
+ * one PHY is expected to be present on the MDIO bus, otherwise it is undefined
+ * which PHY is returned.
+ *
+ * @bus: MII/MDIO bus that hosts the PHY
+ * @addr: PHY address on MDIO bus
+ * @dev: Ethernet device to associate to the PHY
+ * @interface: type of MAC-PHY interface
+ * @return pointer to phy_device if a PHY is found, or NULL otherwise
+ */
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct eth_device *dev,
phy_interface_t interface);
+
static inline ofnode phy_get_ofnode(struct phy_device *phydev)
{
return ofnode_null();
int phy_xilinx_init(void);
int phy_mscc_init(void);
int phy_fixed_init(void);
+int phy_ncsi_init(void);
+int phy_xilinx_gmii2rgmii_init(void);
int board_phy_config(struct phy_device *phydev);
int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
projects / oweals / u-boot.git / blobdiff