#define IMAGE_ENABLE_FIT 1
#define IMAGE_ENABLE_OF_LIBFDT 1
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORT 1
#define CONFIG_FIT_ENABLE_SHA256_SUPPORT
#define CONFIG_SHA1
#define CONFIG_SHA256
# define IMAGE_ENABLE_SHA1 1
# endif
# else
-# define CONFIG_CRC32 /* FIT images need CRC32 support */
# define IMAGE_ENABLE_CRC32 1
# define IMAGE_ENABLE_MD5 1
# define IMAGE_ENABLE_SHA1 1
* Operating System Codes
*
* The following are exposed to uImage header.
- * Do not change values for backward compatibility.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
enum {
IH_OS_INVALID = 0, /* Invalid OS */
IH_OS_OPENRTOS, /* OpenRTOS */
IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
IH_OS_TEE, /* Trusted Execution Environment */
+ IH_OS_OPENSBI, /* RISC-V OpenSBI */
IH_OS_COUNT,
};
* CPU Architecture Codes (supported by Linux)
*
* The following are exposed to uImage header.
- * Do not change values for backward compatibility.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
enum {
IH_ARCH_INVALID = 0, /* Invalid CPU */
* as command interpreter (=> Shell Scripts).
*
* The following are exposed to uImage header.
- * Do not change values for backward compatibility.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
enum {
IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */
IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */
IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */
- IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */
IH_TYPE_UBLIMAGE, /* Davinci UBL Image */
IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */
IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */
IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */
IH_TYPE_SOCFPGAIMAGE_V1, /* Altera SOCFPGA A10 Preloader */
IH_TYPE_MTKIMAGE, /* MediaTek BootROM loadable Image */
+ IH_TYPE_IMX8MIMAGE, /* Freescale IMX8MBoot Image */
+ IH_TYPE_IMX8IMAGE, /* Freescale IMX8Boot Image */
+ IH_TYPE_COPRO, /* Coprocessor Image for remoteproc*/
IH_TYPE_COUNT, /* Number of image types */
};
* Compression Types
*
* The following are exposed to uImage header.
- * Do not change values for backward compatibility.
+ * New IDs *MUST* be appended at the end of the list and *NEVER*
+ * inserted for backward compatibility.
*/
enum {
IH_COMP_NONE = 0, /* No Compression Used */
IH_COMP_COUNT,
};
+#define LZ4F_MAGIC 0x184D2204 /* LZ4 Magic Number */
#define IH_MAGIC 0x27051956 /* Image Magic Number */
#define IH_NMLEN 32 /* Image Name Length */
* all data in network byte order (aka natural aka bigendian).
*/
typedef struct image_header {
- __be32 ih_magic; /* Image Header Magic Number */
- __be32 ih_hcrc; /* Image Header CRC Checksum */
- __be32 ih_time; /* Image Creation Timestamp */
- __be32 ih_size; /* Image Data Size */
- __be32 ih_load; /* Data Load Address */
- __be32 ih_ep; /* Entry Point Address */
- __be32 ih_dcrc; /* Image Data CRC Checksum */
+ uint32_t ih_magic; /* Image Header Magic Number */
+ uint32_t ih_hcrc; /* Image Header CRC Checksum */
+ uint32_t ih_time; /* Image Creation Timestamp */
+ uint32_t ih_size; /* Image Data Size */
+ uint32_t ih_load; /* Data Load Address */
+ uint32_t ih_ep; /* Entry Point Address */
+ uint32_t ih_dcrc; /* Image Data CRC Checksum */
uint8_t ih_os; /* Operating System */
uint8_t ih_arch; /* CPU architecture */
uint8_t ih_type; /* Image Type */
#ifndef USE_HOSTCC
/* Image format types, returned by _get_format() routine */
#define IMAGE_FORMAT_INVALID 0x00
-#if defined(CONFIG_IMAGE_FORMAT_LEGACY)
+#if defined(CONFIG_LEGACY_IMAGE_FORMAT)
#define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */
#endif
#define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */
}
#endif /* USE_HOSTCC */
+/**
+ * image_decomp() - decompress an image
+ *
+ * @comp: Compression algorithm that is used (IH_COMP_...)
+ * @load: Destination load address in U-Boot memory
+ * @image_start Image start address (where we are decompressing from)
+ * @type: OS type (IH_OS_...)
+ * @load_bug: Place to decompress to
+ * @image_buf: Address to decompress from
+ * @image_len: Number of bytes in @image_buf to decompress
+ * @unc_len: Available space for decompression
+ * @return 0 if OK, -ve on error (BOOTM_ERR_...)
+ */
+int image_decomp(int comp, ulong load, ulong image_start, int type,
+ void *load_buf, void *image_buf, ulong image_len,
+ uint unc_len, ulong *load_end);
+
/**
* Set up properties in the FDT
*
int fit_conf_find_compat(const void *fit, const void *fdt);
int fit_conf_get_node(const void *fit, const char *conf_uname);
+int fit_conf_get_prop_node_count(const void *fit, int noffset,
+ const char *prop_name);
+int fit_conf_get_prop_node_index(const void *fit, int noffset,
+ const char *prop_name, int index);
/**
* fit_conf_get_prop_node() - Get node refered to by a configuration
* At present we only support signing on the host, and verification on the
* device
*/
-#if defined(CONFIG_FIT_SIGNATURE)
-# ifdef USE_HOSTCC
+#if defined(USE_HOSTCC)
+# if defined(CONFIG_FIT_SIGNATURE)
# define IMAGE_ENABLE_SIGN 1
# define IMAGE_ENABLE_VERIFY 1
-# include <openssl/evp.h>
-#else
+# include <openssl/evp.h>
+# else
# define IMAGE_ENABLE_SIGN 0
-# define IMAGE_ENABLE_VERIFY 1
+# define IMAGE_ENABLE_VERIFY 0
# endif
#else
# define IMAGE_ENABLE_SIGN 0
-# define IMAGE_ENABLE_VERIFY 0
+# define IMAGE_ENABLE_VERIFY CONFIG_IS_ENABLED(FIT_SIGNATURE)
#endif
#ifdef USE_HOSTCC
ulong *second_data, ulong *second_len);
ulong android_image_get_end(const struct andr_img_hdr *hdr);
ulong android_image_get_kload(const struct andr_img_hdr *hdr);
+ulong android_image_get_kcomp(const struct andr_img_hdr *hdr);
void android_print_contents(const struct andr_img_hdr *hdr);
#endif /* CONFIG_ANDROID_BOOT_IMAGE */
projects / oweals / u-boot.git / blobdiff