Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig

[oweals/u-boot.git] / include / configs / xtfpga.h

diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h
index c7862be10d72214681a4bc7294da8f0cb07b0385..b8de931d2c1cdce07a92c82f4a65524e3935d23f 100644 (file)
--- a/include/configs/xtfpga.h
+++ b/include/configs/xtfpga.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2007-2013 Tensilica, Inc.
  * Copyright (C) 2014 - 2016 Cadence Design Systems Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -66,7 +65,6 @@
 # define CONFIG_SYS_MONITOR_LEN                0x00040000      /* 256KB */
 #endif
 
-#define CONFIG_SYS_STACKSIZE           (512 << 10)     /* stack 512KB */
 #define CONFIG_SYS_MALLOC_LEN          (256 << 10)     /* heap  256KB */
 
 /* Linux boot param area in RAM (used only when booting linux) */
@@ -99,9 +97,8 @@
 #define CONFIG_SYS_MEMORY_SIZE         CONFIG_SYS_SDRAM_SIZE
 #endif
 
-#define CONFIG_SYS_MEMORY_TOP          MEMADDR(CONFIG_SYS_MEMORY_SIZE)
-#define CONFIG_SYS_TEXT_ADDR           \
-       (CONFIG_SYS_MEMORY_TOP - CONFIG_SYS_MONITOR_LEN)
+#define XTENSA_SYS_TEXT_ADDR           \
+       (MEMADDR(CONFIG_SYS_MEMORY_SIZE) - CONFIG_SYS_MONITOR_LEN)
 
 /* Used by tftpboot; env var 'loadaddr' */
 #define CONFIG_SYS_LOAD_ADDR           MEMADDR(0x02000000)
@@ -110,44 +107,19 @@
 /* U-Boot general configuration */
 /*==============================*/
 
-#undef CONFIG_USE_IRQ                  /* Keep it simple, poll only */
 #define CONFIG_BOARD_POSTCLK_INIT
-#define CONFIG_MISC_INIT_R
 
 #define CONFIG_BOOTFILE                        "uImage"
        /* Console I/O Buffer Size  */
 #define CONFIG_SYS_CBSIZE              1024
-       /* Prt buf */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                        sizeof(CONFIG_SYS_PROMPT) + 16)
-       /* max number of command args */
-#define CONFIG_SYS_MAXARGS             16
        /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-/*=================*/
-/* U-Boot commands */
-/*=================*/
-
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_SAVES
-
 /*==============================*/
 /* U-Boot autoboot configuration */
 /*==============================*/
 
-#define CONFIG_BOOT_RETRY_TIME         60      /* retry after 60 secs */
-
-#define CONFIG_AUTO_COMPLETE                   /* Support tab autocompletion */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#ifdef DEBUG
-#define CONFIG_PANIC_HANG              1       /* Require manual reboot */
-#endif
 
 
 /*=========================================*/
@@ -207,8 +179,6 @@
 
 /* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */
 #define CONFIG_SYS_NS16550_CLK         CONFIG_SYS_CLK_FREQ
-#define CONFIG_CONS_INDEX              1       /* use UART0 for console */
-#define CONFIG_BAUDRATE                        115200  /* Default baud rate */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*======================*/
@@ -223,8 +193,6 @@
 /* Flash & Environment */
 /*=====================*/
 
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER                        /* use generic CFI driver */
 #define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
 #ifdef CONFIG_XTFPGA_LX60
@@ -249,13 +217,11 @@
 #define CONFIG_SYS_MAX_FLASH_SECT      \
        (CONFIG_SYS_FLASH_SECT_SZ/CONFIG_SYS_FLASH_PARMSECT_SZ + \
         CONFIG_SYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ - 1)
-#define CONFIG_SYS_FLASH_PROTECTION            /* hw flash protection */
 
 /*
  * Put environment in top block (64kB)
  * Another option would be to put env. in 2nd param block offs 8KB, size 8KB
  */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OFFSET    (CONFIG_SYS_FLASH_SIZE - CONFIG_SYS_FLASH_SECT_SZ)
 #define CONFIG_ENV_SIZE             CONFIG_SYS_FLASH_SECT_SZ