Convert all of CONFIG_CONS_INDEX to Kconfig

[oweals/u-boot.git] / include / configs / usbarmory.h

diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
index 6735055a616fca6e62f24ae4e726bad9a1226c82..492aeb4ca3c8d0398a3c9048290c69a4986fbdd9 100644 (file)
--- a/include/configs/usbarmory.h
+++ b/include/configs/usbarmory.h
@@ -11,80 +11,54 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_MX53
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_FSL_CLK
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_OF_LIBFDT
-#define CONFIG_MXC_GPIO
+#define CONFIG_SYS_FSL_CLK
 
 #include <asm/arch/imx-regs.h>
 
-#include <config_distro_defaults.h>
-
-/* U-Boot commands */
-#define CONFIG_CMD_MEMTEST
-
 /* U-Boot environment */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 #define CONFIG_ENV_SIZE                (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
 /* U-Boot general configurations */
 #define CONFIG_SYS_CBSIZE      512
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
 /* UART */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE   UART1_BASE
-#define CONFIG_CONS_INDEX      1
-#define CONFIG_BAUDRATE                115200
 
 /* SD/MMC */
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 
 /* USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX5
-#define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORT    1
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
 
 /* I2C */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 
 /* Fuse */
-#define CONFIG_CMD_FUSE
 #define CONFIG_FSL_IIM
 
-/* Linux boot */
+/* U-Boot memory offsets */
 #define CONFIG_LOADADDR                0x72000000
-#define CONFIG_SYS_TEXT_BASE   0x77800000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
+
+/* Linux boot */
 #define CONFIG_HOSTNAME                usbarmory
 #define CONFIG_BOOTCOMMAND                                             \
        "run distro_bootcmd; "                                          \
        "setenv bootargs console=${console} ${bootargs_default}; "      \
-       "ext2load mmc 0:1 ${kernel_addr_r} /boot/uImage; "              \
+       "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "              \
        "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "             \
-       "bootm ${kernel_addr_r} - ${fdt_addr_r}"
+       "bootz ${kernel_addr_r} - ${fdt_addr_r}"
 
 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
 
@@ -104,6 +78,11 @@
        "console=ttymxc0,115200\0"                              \
        BOOTENV
 
+#ifndef CONFIG_CMDLINE
+#define USBARMORY_FIT_PATH     "/boot/usbarmory.itb"
+#define USBARMORY_FIT_ADDR     "0x70800000"
+#endif
+
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     CSD0_BASE_ADDR