treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig

[oweals/u-boot.git] / include / configs / pcm058.h

diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h
index c36245b4cc7bcfa53a28dc580d218655d6b71810..9481e5b5c5c70f73763f8f0412cd9f071237932e 100644 (file)
--- a/include/configs/pcm058.h
+++ b/include/configs/pcm058.h
@@ -8,8 +8,6 @@
 #ifndef __PCM058_CONFIG_H
 #define __PCM058_CONFIG_H
 
-#include <config_distro_defaults.h>
-
 #ifdef CONFIG_SPL
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
@@ -24,14 +22,11 @@
 /* Serial */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE          UART2_BASE
-#define CONFIG_CONSOLE_DEV             "ttymxc1"
+#define CONSOLE_DEV            "ttymxc1"
 
 #define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
 /* Early setup */
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 
 /* Size of malloc() pool */
@@ -45,12 +40,7 @@
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         3
 
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_PHY_KSZ9031
-
 /* SPI Flash */
-#define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED                20000000
@@ -63,10 +53,7 @@
 #define CONFIG_SYS_I2C_SPEED             100000
 
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_CMD_NAND
 /* Enable NAND support */
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -74,25 +61,10 @@
 #endif
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
 
 /* Filesystem support */
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
-#define MTDIDS_DEFAULT    "nand0=nand"
-#define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
-
-/* Various command support */
-#define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
-#define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
-#define CONFIG_CMD_GSC
-#define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
-#define CONFIG_RBTREE
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -112,7 +84,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM       1
 
 /* Environment organization */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                (16 * 1024)
 #define CONFIG_ENV_OFFSET              (1024 * SZ_1K)
 #define CONFIG_ENV_SECT_SIZE           (64 * SZ_1K)