Merge git://git.denx.de/u-boot-mpc85xx

[oweals/u-boot.git] / include / configs / pcm030.h

diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h
index 31a93c87de8bbc5f4e5983068f2691d150a45cc7..500277f7f0a8f14db92221602ea992596fc93eb4 100644 (file)
--- a/include/configs/pcm030.h
+++ b/include/configs/pcm030.h
@@ -44,21 +44,11 @@ Serial console configuration
                                        /*define gps port conf. */
                                        /* register later on to */
                                        /*enable UART function! */
-#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 
 #define        CONFIG_TIMESTAMP        1       /* Print image info with timestamp */
@@ -73,15 +63,8 @@ Serial console configuration
 #define MTDPARTS_DEFAULT       "mtdparts=physmap-flash.0:256k(ubootl)," \
        "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
 
-/*-----------------------------------------------------------------------------
-Autobooting
------------------------------------------------------------------------------*/
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* allow stopping of boot process */
-                                       /* even with bootdelay=0 */
 #undef CONFIG_BOOTARGS
 
-
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\
                "mount root filesystem over NFS;" \
@@ -126,8 +109,6 @@ IPB Bus clocking configuration.
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  * -----------------------------------------------------------------------*/
-#define CONFIG_PCI                     1
-#define CONFIG_PCI_PNP                 1
 #define CONFIG_PCI_SCAN_SHOW           1
 #define CONFIG_PCI_MEM_BUS             0x40000000
 #define CONFIG_PCI_MEM_PHYS            CONFIG_PCI_MEM_BUS
@@ -137,31 +118,6 @@ IPB Bus clocking configuration.
 #define CONFIG_PCI_IO_SIZE             0x01000000
 #define CONFIG_SYS_XLB_PIPELINING      1
 
-/*---------------------------------------------------------------------------
- I2C configuration
----------------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*---------------------------------------------------------------------------
- EEPROM CAT24WC32 configuration
----------------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x52    /* 1010100x */
-#define CONFIG_SYS_I2C_FACT_ADDR       0x52    /* EEPROM CAT24WC32 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2       /* Bytes of address */
-#define CONFIG_SYS_EEPROM_SIZE         2048
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
-
-/*---------------------------------------------------------------------------
-RTC configuration
----------------------------------------------------------------------------*/
-#define RTC
-#define CONFIG_RTC_PCF8563             1
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
-
 /*---------------------------------------------------------------------------
  Flash configuration
 ---------------------------------------------------------------------------*/
@@ -189,11 +145,10 @@ RTC configuration
  Environment settings
 ---------------------------------------------------------------------------*/
 
-/* pcm030 ships with environment is EEPROM by default */
-#define CONFIG_ENV_IS_IN_EEPROM        1
+#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_OFFSET      0x00    /* environment starts at the */
                                        /*beginning of the EEPROM */
-#define CONFIG_ENV_SIZE                CONFIG_SYS_EEPROM_SIZE
+#define CONFIG_ENV_SIZE                2048
 
 #define CONFIG_ENV_OVERWRITE   1
 
@@ -340,7 +295,6 @@ RTC configuration
  Miscellaneous configurable options
 -------------------------------------------------------------------------------*/
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
 
 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
 
@@ -364,8 +318,6 @@ RTC configuration
 
 #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
 
-#define CONFIG_DISPLAY_BOARDINFO 1
-
 /*-----------------------------------------------------------------------------
  Various low-level settings
 -----------------------------------------------------------------------------*/
@@ -394,8 +346,6 @@ RTC configuration
  IDE/ATA stuff Supports IDE harddisk
 ----------------------------------------------------------------------------*/
 
-#undef  CONFIG_IDE_8xx_PCCARD  /* Use IDE with PC Card Adapter */
-#undef CONFIG_IDE_8xx_DIRECT   /* Direct IDE not supported */
 #undef CONFIG_IDE_LED          /* LED for ide not supported */
 #define CONFIG_SYS_ATA_CS_ON_TIMER01
 #define        CONFIG_IDE_RESET 1      /* reset for ide supported */
@@ -414,17 +364,10 @@ RTC configuration
 #define CONFIG_SYS_ATA_STRIDE          4
 #define CONFIG_ATAPI                   1
 
-/* we enable IDE and FAT support, so we also need partition support */
-#define CONFIG_DOS_PARTITION 1
-
 /* USB */
 #define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT               1
-#define CONFIG_OF_BOARD_SETUP          1
-
 #define OF_CPU                         "PowerPC,5200@0"
 #define OF_TBCLK                       CONFIG_SYS_MPC5XXX_CLKIN
 #define OF_SOC                         "soc5200@f0000000"