+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
*
* Based on davinci_dvevm.h. Original Copyrights follow:
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier: GPL-2.0
*/
#ifndef __CONFIG_H
/*
* Board
*/
-#define CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_USE_SPIFLASH
-#undef CONFIG_SYS_USE_NOR
-#define CONFIG_USE_NAND
/*
* SoC Configuration
*/
#define CONFIG_MACH_OMAPL138_LCDK
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
/*
* Memory Info
#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
+#define CONFIG_SPL_BSS_START_ADDR DAVINCI_DDR_EMIF_DATA_BASE
+#define CONFIG_SPL_BSS_MAX_SIZE 0x1080000
+
/* memtest start addr */
#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
/* memtest will be run on 16MB */
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-
#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
DAVINCI_SYSCFG_SUSPSRC_SPI1 | \
* PLL configuration
*/
-#define CONFIG_SYS_DA850_PLL0_PLLM 37
+/* Requires CONFIG_SYS_DA850_PLL0_POSTDIV=0, set in Kconfig */
+#define CONFIG_SYS_DA850_PLL0_PLLM 18
#define CONFIG_SYS_DA850_PLL1_PLLM 21
/*
/*
* Serial Driver info
*/
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
-#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_SPI
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
-#define CONFIG_SF_DEFAULT_SPEED 30000000
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
-#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000
-#endif
/*
* I2C Configuration
*/
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
#define CONFIG_SYS_DAVINCI_I2C_SPEED 25000
#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20
/*
* Flash & Environment
*/
-#ifdef CONFIG_USE_NAND
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
-#define CONFIG_ENV_SIZE (128 << 9)
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#ifdef CONFIG_MTD_RAW_NAND
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
#define CONFIG_SYS_NAND_PAGE_2K
#define CONFIG_SYS_NAND_CS 3
#define CONFIG_SPL_NAND_LOAD
#endif
-#ifdef CONFIG_SYS_USE_NOR
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
-#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */
-#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3)
-#define CONFIG_ENV_SIZE (128 << 10)
-#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
-#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */
-#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
- + 3)
-#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
-#endif
-
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_ENV_SIZE (64 << 10)
-#define CONFIG_ENV_OFFSET (256 << 10)
-#define CONFIG_ENV_SECT_SIZE (64 << 10)
-#endif
-
/*
* Network & Ethernet Configuration
*/
#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
#undef CONFIG_DRIVER_TI_EMAC_USE_RMII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS2
/*
* U-Boot general configuration
*/
-#define CONFIG_MISC_INIT_R
#define CONFIG_BOOTFILE "zImage" /* Boot file name */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
+
+/*
+ * USB Configs
+ */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
/*
* Linux Information
#define CONFIG_CLOCKS
#endif
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
-#ifdef CONFIG_USE_NAND
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#endif
-
-#if !defined(CONFIG_USE_NAND) && \
- !defined(CONFIG_SYS_USE_NOR) && \
- !defined(CONFIG_USE_SPIFLASH)
-#define CONFIG_ENV_SIZE (16 << 10)
-#endif
-
/* SD/MMC */
-#ifdef CONFIG_ENV_IS_IN_MMC
-#undef CONFIG_ENV_SIZE
-#undef CONFIG_ENV_OFFSET
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
-#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */
-#endif
-
-#ifndef CONFIG_DIRECT_NOR_BOOT
/* defines for SPL */
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SPL_STACK 0x8001ff00
-#define CONFIG_SPL_TEXT_BASE 0x80000000
#define CONFIG_SPL_MAX_FOOTPRINT 32768
#define CONFIG_SPL_PAD_TO 32768
-#endif
/* additions for new relocation code, must added to all boards */
#define CONFIG_SYS_SDRAM_BASE 0xc0000000
projects / oweals / u-boot.git / blobdiff