Convert CONFIG_MISC_INIT_R to Kconfig

[oweals/u-boot.git] / include / configs / omap3_igep00x0.h

diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
index 31972bd31de72cd2926a4f480470624abee3d3d7..b9d65697521bb754b6ccb093b979cf56f49573a1 100644 (file)
--- a/include/configs/omap3_igep00x0.h
+++ b/include/configs/omap3_igep00x0.h
@@ -1,20 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common configuration settings for IGEP technology based boards
  *
  * (C) Copyright 2012
  * ISEE 2007 SL, <www.iseebcn.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __IGEP00X0_H
 #define __IGEP00X0_H
 
-#define CONFIG_NR_DRAM_BANKS            2
-#define CONFIG_NAND
-
 #include <configs/ti_omap3_common.h>
-#include <asm/mach-types.h>
 
 /*
  * We are only ever GP parts and will utilize all of the "downloaded image"
@@ -23,43 +18,27 @@
 #undef CONFIG_SPL_TEXT_BASE
 #define CONFIG_SPL_TEXT_BASE           0x40200000
 
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_REVISION_TAG            1
 
-/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
-#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
-#define CONFIG_STATUS_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define CONFIG_GPIO_LED
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-#define RED_LED_GPIO 27
-#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define RED_LED_GPIO 16
-#else
-#error "status LED not defined for this machine."
-#endif
-#define RED_LED_DEV                    0
-#define STATUS_LED_BIT                 RED_LED_GPIO
-#define STATUS_LED_STATE               STATUS_LED_ON
-#define STATUS_LED_PERIOD              (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT                        RED_LED_DEV
-#endif
-
 /* GPIO banks */
-#define CONFIG_OMAP3_GPIO_3            /* GPIO64 .. 95 is in GPIO bank 3 */
-#define CONFIG_OMAP3_GPIO_5            /* GPIO128..159 is in GPIO bank 5 */
-#define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
+#define CONFIG_OMAP3_GPIO_2            /* GPIO32..63   is in GPIO bank 2 */
+#define CONFIG_OMAP3_GPIO_4            /* GPIO96..127  is in GPIO bank 4 */
 
-/* USB */
-#define CONFIG_USB_MUSB_UDC            1
-#define CONFIG_USB_OMAP3               1
-#define CONFIG_TWL4030_USB             1
+/* TPS65950 */
+#define PBIASLITEVMODE1                        (1 << 8)
+
+/* LED */
+#define IGEP0020_GPIO_LED              27
+#define IGEP0030_GPIO_LED              16
+
+/* Board and revision detection GPIOs */
+#define IGEP0030_USB_TRANSCEIVER_RESET         54
+#define GPIO_IGEP00X0_BOARD_DETECTION          28
+#define GPIO_IGEP00X0_REVISION_DETECTION       129
 
 /* USB device configuration */
 #define CONFIG_USB_DEVICE              1
 #define CONFIG_USB_TTY                 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
 
 /* Change these to suit your needs */
 #define CONFIG_USBD_VENDORID           0x0451
@@ -67,9 +46,6 @@
 #define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
 #define CONFIG_USBD_PRODUCT_NAME       "IGEP"
 
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_ONENAND
-
 #ifndef CONFIG_SPL_BUILD
 
 /* Environment */
@@ -88,24 +64,29 @@
 
 #include <config_distro_bootcmd.h>
 
+#define ENV_FINDFDT \
+       "findfdt="\
+               "if test ${board_name} = igep0020; then " \
+                       "if test ${board_rev} = F; then " \
+                               "setenv fdtfile omap3-igep0020-rev-f.dtb; " \
+                       "else " \
+                               "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
+               "if test ${board_name} = igep0030; then " \
+                       "if test ${board_rev} = G; then " \
+                               "setenv fdtfile omap3-igep0030-rev-g.dtb; " \
+                       "else " \
+                               "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
+               "if test ${fdtfile} = ''; then " \
+                       "echo WARNING: Could not determine device tree to use; fi; \0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
+       ENV_FINDFDT \
        ENV_DEVICE_SETTINGS \
        MEM_LAYOUT_SETTINGS \
        BOOTENV
 
 #endif
 
-/*
- * SMSC911x Ethernet
- */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE            0x2C000000
-#endif /* (CONFIG_CMD_NET) */
-
-#define CONFIG_RBTREE
-#define CONFIG_MTD_PARTITIONS
 #define CONFIG_SYS_MTDPARTS_RUNTIME
 
 /* OneNAND config */
@@ -114,8 +95,6 @@
 #define CONFIG_SYS_ONENAND_BLOCK_SIZE  (128*1024)
 
 /* NAND config */
-#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
@@ -132,8 +111,6 @@
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       14
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_BCH
 
 /* UBI configuration */
 #define CONFIG_SPL_UBI                 1
@@ -150,12 +127,9 @@
 #define CONFIG_SPL_UBI_INFO_ADDR       0x88080000
 
 /* environment organization */
-#define CONFIG_ENV_IS_IN_UBI           1
 #define CONFIG_ENV_UBI_PART            "UBI"
 #define CONFIG_ENV_UBI_VOLUME          "config"
 #define CONFIG_ENV_UBI_VOLUME_REDUND   "config_r"
-#define CONFIG_UBI_SILENCE_MSG         1
-#define CONFIG_UBIFS_SILENCE_MSG       1
 #define CONFIG_ENV_SIZE                        (32*1024)
 
 #endif /* __IGEP00X0_H */