+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Common configuration settings for IGEP technology based boards
*
* (C) Copyright 2012
* ISEE 2007 SL, <www.iseebcn.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __IGEP00X0_H
#define __IGEP00X0_H
-#define CONFIG_NR_DRAM_BANKS 2
-#define CONFIG_NAND
-
#include <configs/ti_omap3_common.h>
-#include <asm/mach-types.h>
/*
* We are only ever GP parts and will utilize all of the "downloaded image"
* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
*/
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE 0x40200000
-
-#define CONFIG_MISC_INIT_R
#define CONFIG_REVISION_TAG 1
-/* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
-#if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
-#define CONFIG_STATUS_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define CONFIG_GPIO_LED
-#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-#define RED_LED_GPIO 27
-#elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-#define RED_LED_GPIO 16
-#else
-#error "status LED not defined for this machine."
-#endif
-#define RED_LED_DEV 0
-#define STATUS_LED_BIT RED_LED_GPIO
-#define STATUS_LED_STATE STATUS_LED_ON
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT RED_LED_DEV
-#endif
-
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */
-#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
-#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
-
-/* USB */
-#define CONFIG_USB_MUSB_UDC 1
-#define CONFIG_USB_OMAP3 1
-#define CONFIG_TWL4030_USB 1
+/* TPS65950 */
+#define PBIASLITEVMODE1 (1 << 8)
-/* USB device configuration */
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* LED */
+#define IGEP0020_GPIO_LED 27
+#define IGEP0030_GPIO_LED 16
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID 0x0451
-#define CONFIG_USBD_PRODUCTID 0x5678
-#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME "IGEP"
-
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_ONENAND
+/* Board and revision detection GPIOs */
+#define IGEP0030_USB_TRANSCEIVER_RESET 54
+#define GPIO_IGEP00X0_BOARD_DETECTION 28
+#define GPIO_IGEP00X0_REVISION_DETECTION 129
#ifndef CONFIG_SPL_BUILD
#include <config_distro_bootcmd.h>
+#define ENV_FINDFDT \
+ "findfdt="\
+ "if test ${board_name} = igep0020; then " \
+ "if test ${board_rev} = F; then " \
+ "setenv fdtfile omap3-igep0020-rev-f.dtb; " \
+ "else " \
+ "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
+ "if test ${board_name} = igep0030; then " \
+ "if test ${board_rev} = G; then " \
+ "setenv fdtfile omap3-igep0030-rev-g.dtb; " \
+ "else " \
+ "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
+ "if test ${fdtfile} = ''; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0"
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ ENV_FINDFDT \
ENV_DEVICE_SETTINGS \
MEM_LAYOUT_SETTINGS \
BOOTENV
#endif
-/*
- * SMSC911x Ethernet
- */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE 0x2C000000
-#endif /* (CONFIG_CMD_NET) */
-
-#define CONFIG_RBTREE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_SYS_MTDPARTS_RUNTIME
-
/* OneNAND config */
#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
/* NAND config */
-#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_ECCSIZE 512
#define CONFIG_SYS_NAND_ECCBYTES 14
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_BCH
-
-/* UBI configuration */
-#define CONFIG_SPL_UBI 1
-#define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
-#define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
-#define CONFIG_SPL_UBI_MAX_PEBS 4096
-#define CONFIG_SPL_UBI_VOL_IDS 8
-#define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
-#define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
-#define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
-#define CONFIG_SPL_UBI_PEB_OFFSET 4
-#define CONFIG_SPL_UBI_VID_OFFSET 512
-#define CONFIG_SPL_UBI_LEB_START 2048
-#define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
-
-/* environment organization */
-#define CONFIG_ENV_IS_IN_UBI 1
-#define CONFIG_ENV_UBI_PART "UBI"
-#define CONFIG_ENV_UBI_VOLUME "config"
-#define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
-#define CONFIG_UBI_SILENCE_MSG 1
-#define CONFIG_UBIFS_SILENCE_MSG 1
-#define CONFIG_ENV_SIZE (32*1024)
#endif /* __IGEP00X0_H */
projects / oweals / u-boot.git / blobdiff