Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig

[oweals/u-boot.git] / include / configs / lsxl.h

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index 7ec82cd4bbda4627e68b17858368b250ecfa7c11..3ba5548f25ac0812803ee44eae88b29a3ef8a409 100644 (file)
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2012 Michael Walle
  * Michael Walle <michael@walle.cc>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_LSXL_H
@@ -30,23 +29,12 @@
 #define CONFIG_KW88F6281               /* SOC Name */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SHOW_BOOT_PROGRESS
 
 #define CONFIG_KIRKWOOD_GPIO
 
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * Enable u-boot API for standalone programs.
- */
-#define CONFIG_API
-
 /*
  * Commands configuration
  */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_IDE
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -55,13 +43,6 @@
 #include "mv-common.h"
 
 /* loading initramfs images without uimage header */
-#define CONFIG_SUPPORT_RAW_INITRD
-
-/* ST M25P40 */
-#undef CONFIG_ENV_SPI_MAX_HZ
-#define CONFIG_ENV_SPI_MAX_HZ          25000000
-#undef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED                25000000
 
 /*
  *  Environment variables configurations
@@ -69,10 +50,7 @@
 #ifdef CONFIG_SPI_FLASH
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
 #define CONFIG_SYS_MAX_FLASH_SECT      8
-#define CONFIG_ENV_IS_IN_SPI_FLASH     1
 #define CONFIG_ENV_SECT_SIZE           0x10000 /* 64K */
-#else
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 
 #define CONFIG_ENV_SIZE                        0x10000 /* 64k */
@@ -82,8 +60,6 @@
  * Default environment variables
  */
 #define CONFIG_LOADADDR                0x00800000
-#define CONFIG_BOOTCOMMAND     "run bootcmd_${bootsource}"
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/sda2"
 
 #if defined(CONFIG_LSXHL)
 #define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
@@ -99,9 +75,9 @@
        "kernel_addr=0x00800000\0"                                      \
        "ramdisk_addr=0x01000000\0"                                     \
        "fdt_addr=0x00ff0000\0"                                         \
-       "bootcmd_legacy=ide reset "                                     \
-               "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
-               "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+       "bootcmd_legacy=sata init "                                     \
+               "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
+               "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
                "&& bootm ${kernel_addr} ${ramdisk_addr}\0"             \
        "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
                "&& tftpboot ${ramdisk_addr} initrd.img "               \
@@ -109,11 +85,11 @@
                "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
                "&& bootz ${kernel_addr} "                              \
                        "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
-       "bootcmd_hdd=ide reset "                                        \
-               "&& load ide ${hdpart} ${kernel_addr} /vmlinuz "        \
-               "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "    \
+       "bootcmd_hdd=sata init "                                        \
+               "&& load sata ${hdpart} ${kernel_addr} /vmlinuz "       \
+               "&& load sata ${hdpart} ${ramdisk_addr} /initrd.img "   \
                "&& setenv ramdisk_len ${filesize} "                    \
-               "&& load ide ${hdpart} ${fdt_addr} /dtb "               \
+               "&& load sata ${hdpart} ${fdt_addr} /dtb "              \
                "&& bootz ${kernel_addr} "                              \
                        "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
        "bootcmd_usb=usb start "                                        \
@@ -154,14 +130,10 @@
 #undef CONFIG_RESET_PHY_R
 #endif /* CONFIG_CMD_NET */
 
-#ifdef CONFIG_CMD_IDE
-#undef CONFIG_IDE_LED
-#undef CONFIG_SYS_IDE_MAXBUS
-#define CONFIG_SYS_IDE_MAXBUS          1
-#undef CONFIG_SYS_IDE_MAXDEVICE
-#define CONFIG_SYS_IDE_MAXDEVICE       1
-#define CONFIG_SYS_ATA_IDE0_OFFSET     MV_SATA_PORT0_OFFSET
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
 #define CONFIG_SYS_64BIT_LBA
+#define CONFIG_LBA48
 #endif
 
 #endif /* _CONFIG_LSXL_H */