Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imx

[oweals/u-boot.git] / include / configs / ls1012ardb.h

diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index ab139b00dd7083f58f909307d4fd625adde8df64..f149a604cfcc3eb76793339d21ebf274fd38ba48 100644 (file)
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS1012ARDB_H__
@@ -12,10 +11,8 @@
 /* DDR */
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
-#define CONFIG_NR_DRAM_BANKS           2
 #define CONFIG_SYS_SDRAM_SIZE          0x40000000
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
@@ -25,6 +22,7 @@
  */
 
 #define I2C_MUX_IO_ADDR                0x24
+#define I2C_MUX_IO2_ADDR       0x25
 #define I2C_MUX_IO_0           0
 #define I2C_MUX_IO_1           1
 #define SW_BOOT_MASK           0x03
@@ -39,29 +37,21 @@
 #define SW_REV_C2              0xD8
 #define SW_REV_D               0xD0
 #define SW_REV_E               0xC8
+#define __PHY_MASK             0xF9
+#define __PHY_ETH2_MASK                0xFB
+#define __PHY_ETH1_MASK                0xFD
 
 /*  MMC  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
 
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 
 #define CONFIG_PCI_SCAN_SHOW
 
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
@@ -72,16 +62,20 @@
        "initrd_high=0xffffffffffffffff\0"      \
        "fdt_addr=0x00f00000\0"                 \
        "kernel_addr=0x01000000\0"              \
+       "kernelheader_addr=0x800000\0"          \
        "scriptaddr=0x80000000\0"               \
+       "scripthdraddr=0x80080000\0"            \
        "fdtheader_addr_r=0x80100000\0"         \
        "kernelheader_addr_r=0x80200000\0"      \
        "kernel_addr_r=0x81000000\0"            \
        "fdt_addr_r=0x90000000\0"               \
        "load_addr=0xa0000000\0"                \
        "kernel_size=0x2800000\0"               \
+       "kernelheader_size=0x40000\0"           \
        "console=ttyS0,115200\0"                \
        BOOTENV                                 \
        "boot_scripts=ls1012ardb_boot.scr\0"    \
+       "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
        "scan_dev_for_boot_part="               \
             "part list ${devtype} ${devnum} devplist; "        \
             "env exists devplist || setenv devplist 1; "       \
@@ -99,15 +93,33 @@
                        "run scan_dev_for_scripts; "      \
                "done;"                                   \
                "\0"                                      \
+       "boot_a_script="                                  \
+               "load ${devtype} ${devnum}:${distro_bootpart} "  \
+                       "${scriptaddr} ${prefix}${script}; "    \
+               "env exists secureboot && load ${devtype} "     \
+                       "${devnum}:${distro_bootpart} "         \
+                       "${scripthdraddr} ${prefix}${boot_script_hdr} " \
+                       "&& esbc_validate ${scripthdraddr};"    \
+               "source ${scriptaddr}\0"          \
        "installer=load mmc 0:2 $load_addr "    \
                   "/flex_installer_arm64.itb; "        \
                   "bootm $load_addr#$board\0"  \
        "qspi_bootcmd=echo Trying load from qspi..;"    \
                "sf probe && sf read $load_addr "       \
-               "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
+               "$kernel_addr $kernel_size; env exists secureboot "     \
+               "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
+               "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+               "bootm $load_addr#$board\0"
 
 #undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+                            "env exists secureboot && esbc_halt;"
+#else
+#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+                          "env exists secureboot && esbc_halt;"
+#endif
 
 #include <asm/fsl_secure_boot.h>