Convert CONFIG_APBH_DMA et al to Kconfig

[oweals/u-boot.git] / include / configs / gw_ventana.h

diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 881f87048a7d72b72125d518273c915185e75cf4..6e994b5dc735df60c2a8c5845734e3c2678444af 100644 (file)
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -8,17 +8,13 @@
 #define __CONFIG_H
 
 /* SPL */
-#define CONFIG_SPL_BOARD_INIT
 /* Location in NAND to read U-Boot from */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
 
 /* Falcon Mode */
-#define CONFIG_CMD_SPL
 #define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
-#define CONFIG_CMD_SPL_WRITE_SIZE      (128 * SZ_1K)
 
 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
-#define CONFIG_CMD_SPL_NAND_OFS                (17 * SZ_1M)
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        (18 * SZ_1M)
 
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
@@ -70,19 +66,13 @@
 
 #elif defined(CONFIG_SPL_NAND_SUPPORT)
 /* Enable NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
 #ifdef CONFIG_CMD_NAND
-  #define CONFIG_NAND_MXS
   #define CONFIG_SYS_MAX_NAND_DEVICE   1
   #define CONFIG_SYS_NAND_BASE         0x40000000
   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
   #define CONFIG_SYS_NAND_ONFI_DETECTION
 
   /* DMA stuff, needed for GPMI/MXS NAND support */
-  #define CONFIG_APBH_DMA
-  #define CONFIG_APBH_DMA_BURST
-  #define CONFIG_APBH_DMA_BURST8
 #endif
 
 #endif /* CONFIG_SPI_FLASH */
@@ -95,33 +85,28 @@
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_I2C_GSC                 0
-#define CONFIG_I2C_PMIC                        1
 #define CONFIG_I2C_EDID
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_SYS_FSL_USDHC_NUM       1
 
-/* Filesystem support */
-#define CONFIG_CMD_UBIFS
+/* eMMC Configs */
+#define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_SUPPORT_EMMC_RPMB
 
 /*
  * SATA Configs
  */
-#define CONFIG_CMD_SATA
 #ifdef CONFIG_CMD_SATA
-  #define CONFIG_DWC_AHSATA
   #define CONFIG_SYS_SATA_MAX_DEVICE   1
   #define CONFIG_DWC_AHSATA_PORT_ID    0
   #define CONFIG_DWC_AHSATA_BASE_ADDR  SATA_ARB_BASE_ADDR
   #define CONFIG_LBA48
-  #define CONFIG_LIBATA
 #endif
 
 /*
  * PCI express
  */
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCI_FIXUP_DEV
@@ -139,12 +124,7 @@
 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 
 /* Various command support */
-#define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
-#define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
-#define CONFIG_CMD_GSC
-#define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 #define CONFIG_CMD_UNZIP         /* gzwrite */
-#define CONFIG_RBTREE
 
 /* Ethernet support */
 #define CONFIG_FEC_MXC
@@ -155,29 +135,16 @@
 #define CONFIG_ARP_TIMEOUT       200UL
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS      0
 #define CONFIG_USBD_HS
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_CDC
 #define CONFIG_NETCONSOLE
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
-
-/* USB Mass Storage Gadget */
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
 
 /* Framebuffer and LCD */
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_IPUV3_CLK          260000000
-#define CONFIG_CMD_HDMIDETECT
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_VIDEO_BMP_LOGO
@@ -188,9 +155,6 @@
 #define CONFIG_HWCONFIG
 #define CONFIG_PREBOOT
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* Memory configuration */
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END        0x10010000
@@ -211,29 +175,13 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_LZO
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_SPI_FLASH
-#define MTDIDS_DEFAULT    "nor0=nor"
-#define MTDPARTS_DEFAULT  \
-       "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
-#else
-#define MTDIDS_DEFAULT    "nand0=nand"
-#define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
-#endif
 
 /* Persistent Environment Config */
-#ifdef CONFIG_SPI_FLASH
-  #define CONFIG_ENV_IS_IN_SPI_FLASH
-#elif defined(CONFIG_SPL_NAND_SUPPORT)
-  #define CONFIG_ENV_IS_IN_NAND
-#else
-  #define CONFIG_ENV_IS_IN_MMC
-#endif
 #if defined(CONFIG_ENV_IS_IN_MMC)
   #define CONFIG_SYS_MMC_ENV_DEV         0
+  #define CONFIG_SYS_MMC_ENV_PART        1
   #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
   #define CONFIG_ENV_SIZE                (128 * SZ_1K)
   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
@@ -266,8 +214,8 @@
        "hwconfig=_UNKNOWN_\0" \
        "video=\0" \
        \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
        "disk=0\0" \
        "part=1\0" \
        \