* 0x020000 - 0x120000 : SPI.u-boot (1MiB)
* 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
* 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
- * 0x140000 - 0x940000 : SPI.fitImage-recovery (8MiB)
- * 0x940000 - 0xD40000 : SPI.swupdate-kernel-FIT (4MiB)
- * 0xD40000 - 0x1540000 : SPI.swupdate-initramfs (8MiB)
+ * 0x140000 - 0x540000 : SPI.swupdate-kernel-FIT (4MiB)
+ * 0x540000 - 0x1540000 : SPI.swupdate-initramfs (16MiB)
+ * 0x1540000 - 0x1640000 : SPI.factory (1MiB)
*/
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_MTD_DEVICE
-#define CONFIG_SPI_FLASH_MTD
-#define CONFIG_MTD_PARTITIONS
+/* SPI Flash Configs */
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
#endif
/* Below values are "dummy" - only to avoid build break */
#define CONFIG_SYS_SPI_ARGS_SIZE 0x10000
#include "imx6_spl.h"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
-#define CONFIG_MISC_INIT_R
-/*#define CONFIG_MXC_UART*/
#define CONFIG_MXC_UART_BASE UART5_BASE
-/* SPI NOR Flash */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_BUS 1
-#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(5, 29) << 8))
-#define CONFIG_SF_DEFAULT_SPEED 50000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#endif
-
/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1
-#define CONFIG_SYS_I2C_MXC_I2C2
-#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_I2C_EDID
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0
-#define CONFIG_MII
-#endif
/* MMC Configs */
-#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SUPPORT_EMMC_BOOT
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#ifndef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "run boot_mmc"
+#define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \
+ "run recovery;" \
+ "else if test ${BOOT_FROM} = FACTORY; then " \
+ "run factory_nfs;" \
+ "else " \
+ "run boot_mmc;" \
+ "fi;fi"
#endif
#define PARTS_DEFAULT \
"name=kernel_raw1,start=128K,size=8M,uuid=${uuid_gpt_kernel_raw1};" \
"name=rootfs1,size=1528M,uuid=${uuid_gpt_rootfs1};" \
"name=kernel_raw2,size=8M,uuid=${uuid_gpt_kernel_raw2};" \
- "name=rootfs2,size=1528M,uuid=${uuid_gpt_rootfs2};" \
+ "name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
"name=data,size=-,uuid=${uuid_gpt_data}\0"
-#define FACTORY_PROCEDURE \
- "echo '#######################';" \
- "echo '# Factory Boot #';" \
- "echo '#######################';" \
- "env default -a;" \
- "saveenv;" \
- "gpt write mmc ${mmcdev} ${partitions};" \
- "run tftp_sf_SPL;" \
- "run tftp_sf_uboot;" \
- TFTP_UPDATE_KERNEL \
- "run tftp_sf_fitImg_recovery;" \
- "run tftp_sf_fitImg_SWU;" \
- "run tftp_sf_initramfs_SWU;" \
- TFTP_UPDATE_ROOTFS \
- "echo '#######################';" \
- "echo '# END - OK #';" \
- "echo '#######################';" \
- "setenv bootcmd 'env default -a; saveenv; run falcon_setup; reset';" \
- "setenv boot_os 'n';" \
- "saveenv;" \
- "reset;"
-
#define SWUPDATE_RECOVERY_PROCEDURE \
"echo '#######################';" \
"echo '# RECOVERY SWUupdate #';" \
"echo '#######################';" \
+ "echo '#######################';" \
+ "echo '# GPT verify #';" \
+ "if gpt verify mmc ${mmcdev} ${partitions}; then " \
+ "echo '# OK ! #';" \
+ "else " \
+ "echo '# FAILED ! #';" \
+ "echo '# GPT RESTORATION #';" \
+ "gpt write mmc ${mmcdev} ${partitions};" \
+ "fi;" \
+ "echo '#######################';" \
"setenv loadaddr_swu_initramfs 0x14000000;" \
"setenv bootargs console=${console} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
"sf probe;" \
"sf read ${loadaddr} swu-kernel;" \
"sf read ${loadaddr_swu_initramfs} swu-initramfs;" \
- "bootm ${loadaddr} ${loadaddr_swu_initramfs};"
-
-#define KERNEL_RECOVERY_PROCEDURE \
- "echo '#######################';" \
- "echo '# RECOVERY KERNEL IMG #';" \
- "echo '#######################';" \
- "sf probe;" \
- "sf read ${loadaddr} lin-recovery;" \
- "bootm;"
+ "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
#define SETUP_BOOTARGS \
"run set_rootfs_part;" \
"rootwait rootfstype=ext4 rw; " \
"run set_kernel_part;" \
"part start mmc ${mmcdev} ${kernel_part} lba_start; " \
- "mmc read ${loadaddr} ${lba_start} 0x2000; " \
+ "mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
"setenv fdt_conf imx6q-${board}-${display}.dtb; "
/* All the numbers are in LBAs */
"mmc write ${loadaddr} ${lba_start} ${fw_sz}; " \
"; fi\0" \
-/* To save some considerable time, we only once download the rootfs image */
-/* and store it on 'active' and 'backup' rootfs partitions */
#define TFTP_UPDATE_ROOTFS \
"setenv rootfs_part ${rootfs_part_active};" \
"run tftp_mmc_rootfs;" \
- "part start mmc ${mmcdev} ${rootfs_part_backup} lba_start;" \
- "mmc write ${loadaddr} ${lba_start} ${fw_sz};" \
+ "run tftp_mmc_rootfs_bkp;" \
+
#define TFTP_UPDATE_RECOVERY_SWU_KERNEL \
"tftp_sf_fitImg_SWU=" \
"; fi\0" \
#define TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
- "swu_initramfs_file=swupdate-image-display5.ext3.gz.u-boot\0" \
+ "swu_initramfs_file=swupdate-image-display5.ext4.gz.u-boot\0" \
"tftp_sf_initramfs_SWU=" \
"if tftp ${loadaddr} ${swu_initramfs_file}; then " \
"sf probe;" \
"sf write ${loadaddr} swu-initramfs ${filesize};" \
"; fi\0" \
-#define TFTP_UPDATE_RECOVERY_KERNEL_INITRAMFS \
- "kernel_recovery_file=fitImage-initramfs\0" \
- "tftp_sf_fitImg_recovery=" \
- "if tftp ${loadaddr} ${kernel_recovery_file}; then " \
- "sf probe;" \
- "sf erase lin-recovery +${filesize};" \
- "sf write ${loadaddr} lin-recovery ${filesize};" \
- "; fi\0" \
-
#define TFTP_UPDATE_BOOTLOADER \
"ubootfile=u-boot.img\0" \
"ubootfileSPL=SPL\0" \
"sf write ${loadaddr} 0x400 ${filesize};" \
"fi\0" \
+#define TFTP_UPDATE_SPINOR \
+ "spinorfile=core-image-lwn-display5.spinor\0" \
+ "spinorsize=0x2000000\0" \
+ "tftp_sf_img=" \
+ "if tftp ${loadaddr} ${spinorfile}; then " \
+ "sf probe;" \
+ "sf erase 0x0 ${spinorsize};" \
+ "sf write ${loadaddr} 0x0 ${filesize};" \
+ "fi\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
PARTS_DEFAULT \
+ "gpio_recovery=93\0" \
+ "check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
"display=tianma-tm070-800x480\0" \
"board=display5\0" \
"mmcdev=0\0" \
"bootdelay=1\0" \
"baudrate=115200\0" \
"bootcmd=" CONFIG_BOOTCOMMAND "\0" \
- "factory=" FACTORY_PROCEDURE "\0" \
- "bootlimit=3\0" \
"ethact=FEC\0" \
"netdev=eth0\0" \
"boot_os=y\0" \
"hostname=display5\0" \
"loadaddr=0x12000000\0" \
"fdtaddr=0x12800000\0" \
- "console=ttymxc4,115200 quiet\0" \
+ "console=ttymxc4,115200 quiet cma=256M\0" \
"fdtfile=imx6q-display5.dtb\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_file=fitImage\0" \
+ "fitImg_fw_sz=0x2200\0" \
"up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
"download_kernel=" \
"tftpboot ${loadaddr} ${kernel_file};\0" \
- "boot_kernel_recovery=" KERNEL_RECOVERY_PROCEDURE "\0" \
+ "factory_nfs=" \
+ "setenv ipaddr 192.168.1.102;" \
+ "setenv gatewayip 192.168.1.1;" \
+ "setenv netmask 255.255.255.0;" \
+ "setenv serverip 192.168.1.2;" \
+ "echo BOOT: FACTORY (LEG);" \
+ "run boot_nfs\0" \
"boot_swu_recovery=" SWUPDATE_RECOVERY_PROCEDURE "\0" \
"recovery=" \
- "if test ${BOOT_FROM_RECOVERY} = SWU; then " \
"echo BOOT: RECOVERY: SWU;" \
- "run boot_swu_recovery;" \
- "else " \
- "echo BOOT: RECOVERY: Linux;" \
- "run boot_kernel_recovery;" \
- "fi\0" \
+ "run boot_swu_recovery\0" \
"boot_tftp=" \
"if run download_kernel; then " \
"setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rootwait;" \
- "bootm ${loadaddr} - ${fdtaddr};" \
+ "bootm ${loadaddr} - ${fdtaddr};reset;" \
"fi\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
"run addip;" \
"setenv bootargs ${bootargs} console=${console};" \
"setenv fdt_conf imx6q-${board}-${display}.dtb; " \
- "bootm ${loadaddr}#conf@${fdt_conf};" \
+ "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
"fi\0" \
"falcon_setup=" \
"if mmc dev ${mmcdev}; then " \
"boot_mmc=" \
"if mmc dev ${mmcdev}; then " \
SETUP_BOOTARGS \
- "bootm ${loadaddr}#conf@${fdt_conf};" \
+ "bootm ${loadaddr}#conf@${fdt_conf};reset;" \
"fi\0" \
"set_kernel_part=" \
"if test ${BOOT_FROM} = ACTIVE; then " \
"run recovery;" \
"fi;fi\0" \
"BOOT_FROM=ACTIVE\0" \
- "BOOT_FROM_RECOVERY=Linux\0" \
TFTP_UPDATE_BOOTLOADER \
+ TFTP_UPDATE_SPINOR \
"kernel_part_active=1\0" \
"kernel_part_backup=3\0" \
__TFTP_UPDATE_KERNEL \
"rootfs_part_active=2\0" \
"rootfs_part_backup=4\0" \
"rootfs_file=core-image-lwn-display5.ext4\0" \
+ "rootfs_file_backup=core-image-lwn-backup-display5.ext4\0" \
__TFTP_UPDATE_ROOTFS \
- TFTP_UPDATE_RECOVERY_KERNEL_INITRAMFS \
+ "tftp_mmc_rootfs_bkp=" \
+ "setenv rootfs_part ${rootfs_part_backup};" \
+ "setenv rootfs_file ${rootfs_file_backup};" \
+ "run tftp_mmc_rootfs\0" \
TFTP_UPDATE_RECOVERY_SWU_KERNEL \
TFTP_UPDATE_RECOVERY_SWU_INITRAMFS \
"\0" \
#define CONFIG_SYS_HZ 1000
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* Commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
+/* Watchdog */
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_WDT
+#undef CONFIG_WATCHDOG
+#define CONFIG_HW_WATCHDOG
+#endif
/* ENV config */
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
projects / oweals / u-boot.git / blobdiff