cmd: add Kconfig option for 'date' command

[oweals/u-boot.git] / include / configs / digsy_mtc.h

diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h
index a5215db2987f6e26ae0a2bb983b672028a5ab01d..2b56945dd939679b5920aa1bd9cf0fa8849da766 100644 (file)
--- a/include/configs/digsy_mtc.h
+++ b/include/configs/digsy_mtc.h
@@ -20,8 +20,7 @@
  * High Level Configuration Options
  */
 
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU) */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU */
 #define CONFIG_DIGSY_MTC       1       /* ... on InterControl digsyMTC board */
 
 /*
@@ -42,7 +41,6 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE     4       /* console is on PSC4  */
-#define CONFIG_BAUDRATE                115200  /* ... at 115200  bps  */
 #define CONFIG_SYS_BAUDRATE_TABLE      \
        { 9600, 19200, 38400, 57600, 115200, 230400 }
 
@@ -51,8 +49,6 @@
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
-#define CONFIG_PCI             1
-#define CONFIG_PCI_PNP         1
 #define CONFIG_PCI_SCAN_SHOW   1
 #define CONFIG_PCI_BOOTDELAY   250
 
@@ -64,27 +60,18 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-/*
- *  Partitions
- */
-#define CONFIG_DOS_PARTITION
 #define CONFIG_BZIP2
 
 /*
  * Video
  */
-#define CONFIG_VIDEO
 
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_MB862xx
 #define CONFIG_VIDEO_MB862xx_ACCEL
 #define CONFIG_VIDEO_CORALP
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)       /* decompressed img */
@@ -98,29 +85,12 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#ifdef CONFIG_VIDEO
-#define CONFIG_CMD_BMP
-#endif
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
 
 #if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
 #define CONFIG_SYS_LOWBOOT     1
@@ -129,7 +99,6 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       1
 
 #undef CONFIG_BOOTARGS
 
@@ -236,12 +205,6 @@
 
 #define CONFIG_BOOTCOMMAND     "run mtcb_start"
 
-/*
- * SPI configuration
- */
-#define CONFIG_HARD_SPI                1
-#define CONFIG_MPC52XX_SPI     1
-
 /*
  * I2C configuration
  */
@@ -299,9 +262,6 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT    240000
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500
 
-#define CONFIG_OF_LIBFDT  1
-#define CONFIG_OF_BOARD_SETUP  1
-
 #define OF_CPU                 "PowerPC,5200@0"
 #define OF_SOC                 "soc5200@f0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 4)
@@ -393,16 +353,8 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_AUTO_COMPLETE   1
 #define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_SYS_PROMPT      "=> "
-#define CONFIG_SYS_HUSH_PARSER
 
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR      " "
-
-#define CONFIG_LOOPW           1
 #define CONFIG_MX_CYCLIC       1
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_SYS_CBSIZE              1024
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -416,8 +368,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x00100000
 
-#define CONFIG_SYS_HZ                  1000
-
 /*
  * Various low-level settings
  */
@@ -461,7 +411,6 @@
  */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
-#define CONFIG_USB_STORAGE
 
 #define CONFIG_USB_CLOCK       0x00013333
 #define CONFIG_USB_CONFIG      0x00002000