Merge branch 'master' of git://www.denx.de/git/u-boot-imx

[oweals/u-boot.git] / include / configs / colibri_vf.h

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index d58145e59d5e7ac1a8cdc1283d47054291f6cd7d..888899eacb349e5a61813849685014c771f4b1f1 100644 (file)
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -14,13 +14,8 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_VF610
-#define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_USE_ARCH_MEMCPY
-#define CONFIG_USE_ARCH_MEMSET
 #define CONFIG_SYS_FSL_CLK
 
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* Calls show_board_info() */
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -33,13 +28,10 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-#define CONFIG_BAUDRATE                        115200
 
 /* NAND support */
 #define CONFIG_CMD_NAND
@@ -58,16 +50,10 @@
                                "512k(u-boot-env),"             \
                                "-(ubi)"
 
-#define CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_RBTREE
 #define CONFIG_LZO
 #define CONFIG_CMD_UBIFS       /* increases size by almost 60 KB */
@@ -84,8 +70,6 @@
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_SERVERIP                192.168.10.1
 
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_LOADADDR                        0x80008000
 #define CONFIG_FDTADDR                 0x84000000
 
@@ -99,7 +83,7 @@
        "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
        "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
        "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
-       "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define NFS_BOOTCMD \
        "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
@@ -108,7 +92,7 @@
        "${setupargs} ${vidargs}; echo Booting from NFS...;" \
        "dhcp ${kernel_addr_r} && "     \
        "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
-       "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define UBI_BOOTCMD    \
        "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
@@ -119,7 +103,7 @@
        "ubi part ubi && " \
        "ubi read ${kernel_addr_r} kernel && " \
        "ubi read ${fdt_addr_r} dtb && " \
-       "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+       "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 
@@ -131,6 +115,7 @@
        "kernel_file=zImage\0" \
        "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
        "fdt_board=eval-v3\0" \
+       "fdt_fixup=;\0" \
        "defargs=\0" \
        "console=ttyLP0\0" \
        "setup=setenv setupargs " \
@@ -186,7 +171,6 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_SYS_NO_FLASH
 
 #ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
@@ -200,8 +184,6 @@
 #define CONFIG_ENV_OFFSET              (12 * 64 * 2048)
 #endif
 
-#define CONFIG_SYS_NO_FLASH
-
 /* USB Host Support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_VF