/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
-/* Network */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0
-
-#define CONFIG_TFTP_TSIZE
-
-/* ENET1 */
-#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
-
/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
#define CONFIG_SYS_FSL_USDHC_NUM 2
#endif
-#undef CONFIG_BOOTM_PLAN9
-#undef CONFIG_BOOTM_RTEMS
-
/* I2C configs */
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
+#if defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
+#define UBOOT_UPDATE \
+ "uboot_hwpart=1\0" \
+ "uboot_blk=2\0" \
+ "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+ "setexpr blkcnt ${blkcnt} / 0x200\0" \
+ "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+ "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0"
+#elif defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
+#define UBOOT_UPDATE \
+ "update_uboot=nand erase.part u-boot1 && " \
+ "nand write ${loadaddr} u-boot1 ${filesize} && " \
+ "nand erase.part u-boot2 && " \
+ "nand write ${loadaddr} u-boot2 ${filesize}\0"
+#endif
+
#ifndef PARTS_DEFAULT
/* Define the default GPT table for eMMC */
#define PARTS_DEFAULT \
"mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \
"bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 "
-#define EMMC_BOOTCMD \
- "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \
- "rootfstype=ext4 rootwait\0" \
- "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
- "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
- "${vidargs}; echo Booting from internal eMMC chip...; " \
- "run m4boot && " \
- "load mmc ${emmcdev}:${emmcbootpart} ${fdt_addr_r} " \
- "${soc}-colibri-emmc-${fdt_board}.dtb && " \
- "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "emmcbootpart=1\0" \
- "emmcdev=0\0" \
- "emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \
- "emmcrootpart=2\0"
-
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"fdt_addr_r=0x82000000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
- "ramdisk_addr_r=0x82100000\0"
-
-#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND)
-#define SD_BOOTDEV 0
-#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define SD_BOOTDEV 1
-#endif
-
-#define SD_BOOTCMD \
- "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
- "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
- "setenv bootargs ${defargs} ${sdargs} " \
- "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
- "run m4boot && " \
- "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
- "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " \
- "${soc}-colibri-${fdt_board}.dtb && " \
- "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "sdbootpart=1\0" \
- "sddev=" __stringify(SD_BOOTDEV) "\0" \
- "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
- "sdrootpart=2\0"
-
+ "pxefile_addr_r=0x87100000\0" \
+ "ramdisk_addr_r=0x82100000\0" \
+ "scriptaddr=0x87000000\0"
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
UBI_BOOTCMD
#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
-#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \
+#define CONFIG_BOOTCOMMAND \
"setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;"
#define MODULE_EXTRA_ENV_SETTINGS \
"variant=-emmc\0" \
- EMMC_BOOTCMD \
EMMC_ANDROID_BOOTCMD
#endif
func(DHCP, dhcp, na)
#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC)
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
+ func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#endif
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
- SD_BOOTCMD \
MODULE_EXTRA_ENV_SETTINGS \
+ UBOOT_UPDATE \
"boot_file=zImage\0" \
+ "bootubipart=ubi\0" \
"console=ttymxc0\0" \
"defargs=\0" \
"fdt_board=eval-v3\0" \
/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)
-
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#if defined(CONFIG_ENV_IS_IN_MMC)
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
- CONFIG_TDX_CFG_BLOCK_OFFSET)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 1
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#endif
#ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND
#define CONFIG_USBD_HS
-/* USB Device Firmware Update support */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
-#define DFU_DEFAULT_POLL_TIMEOUT 300
-
#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO)
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
projects / oweals / u-boot.git / blobdiff