Merge branch 'master' of git://git.denx.de/u-boot-socfpga

[oweals/u-boot.git] / include / configs / colibri_imx6.h

diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 86f3f0d4fa2d666a931f9bef17832c7c2e207d75..95b5a14b595c93d94d829fad9cb06932efa1fb4a 100644 (file)
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -40,7 +40,6 @@
 #define CONFIG_SYS_MXC_I2C3_SPEED      400000
 
 /* MMC Configs */
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
@@ -92,6 +91,7 @@
 
 #ifndef CONFIG_SPL_BUILD
 #define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
        func(USB, usb, 0) \
        func(DHCP, dhcp, na)
@@ -148,47 +148,10 @@
        "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
                "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 
-#define SD_BOOTCMD \
-       "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} rw,noatime " \
-               "rootfstype=ext4 rootwait\0" \
-       "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
-               "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
-               "${vidargs}; echo Booting from SD card; " \
-               "run sddtbload; load mmc ${sddev}:${sdbootpart} "\
-               "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
-               "bootz ${kernel_addr_r} ${dtbparam}\0" \
-       "sdbootpart=1\0" \
-       "sddev=1\0" \
-       "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
-               "${fdt_addr_r} ${fdt_file} && setenv dtbparam \" - " \
-               "${fdt_addr_r}\" && true\0" \
-       "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
-       "sdrootpart=2\0"
-
-#define USB_BOOTCMD \
-       "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} rw,noatime " \
-               "rootfstype=ext4 rootwait\0" \
-       "usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
-               "setenv bootargs ${defargs} ${setupargs} " \
-               "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
-               "run usbdtbload; " \
-               "load usb ${usbdev}:${usbbootpart} ${kernel_addr_r} " \
-               "${boot_file} && run fdt_fixup && " \
-               "bootz ${kernel_addr_r} ${dtbparam}\0" \
-       "usbbootpart=1\0" \
-       "usbdev=0\0" \
-       "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
-               "${fdt_addr_r} " \
-               "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && " \
-               "true\0" \
-       "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
-       "usbrootpart=2\0"
-
 #define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
 #define CONFIG_EXTRA_ENV_SETTINGS \
        BOOTENV \
-       "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
-               "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
+       "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \
                "usb start ; " \
                "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
        "boot_file=zImage\0" \
@@ -200,8 +163,6 @@
        "fdt_fixup=;\0" \
        MEM_LAYOUT_ENV_SETTINGS \
        NFS_BOOTCMD \
-       SD_BOOTCMD \
-       USB_BOOTCMD \
        "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
                "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
                "flash_eth.img && source ${loadaddr}\0" \
@@ -216,6 +177,7 @@
                "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
                "source ${loadaddr}\0" \
        "splashpos=m,m\0" \
+       "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
        "vidargs=video=mxcfb0:dev=lcd,640x480M@60,if=RGB666 " \
                "video=mxcfb1:off fbmem=8M\0 "
 
@@ -244,12 +206,9 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* environment organization */
-#define CONFIG_ENV_SIZE                        (8 * 1024)
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_ENV_OFFSET              (-CONFIG_ENV_SIZE + \
-                                        CONFIG_TDX_CFG_BLOCK_OFFSET)
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_SYS_MMC_ENV_PART                1
 #endif