cm_fx6: fix video stdout in default environment

[oweals/u-boot.git] / include / configs / cm_fx6.h

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 35328b164615f6644f992738de93e8261083bc6a..35f251c15ed42deb298dac1fde37357b607e3aa2 100644 (file)
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Config file for Compulab CM-FX6 board
  *
  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
  *
  * Author: Nikita Kiryanov <nikita@compulab.co.il>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_CM_FX6_H
@@ -25,9 +24,6 @@
 #define PHYS_SDRAM_1                   MMDC0_ARB_BASE_ADDR
 #define PHYS_SDRAM_2                   MMDC1_ARB_BASE_ADDR
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_NR_DRAM_BANKS           2
-#define CONFIG_SYS_MEMTEST_START       0x10000000
-#define CONFIG_SYS_MEMTEST_END         0x10010000
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 #define CONFIG_SYS_INIT_SP_OFFSET \
@@ -40,27 +36,7 @@
 #define CONFIG_MXC_UART_BASE           UART4_BASE
 #define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
-/* SPI flash */
-#define CONFIG_SF_DEFAULT_BUS          0
-#define CONFIG_SF_DEFAULT_CS           0
-#define CONFIG_SF_DEFAULT_SPEED                25000000
-#define CONFIG_SF_DEFAULT_MODE         (SPI_MODE_0)
-
-/* MTD support */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_SPI_FLASH_MTD
-#endif
-
 /* Environment */
-#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SECT_SIZE           (64 * 1024)
-#define CONFIG_ENV_SIZE                        (8 * 1024)
-#define CONFIG_ENV_OFFSET              (768 * 1024)
 
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -73,8 +49,8 @@
        "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
        "fdtfile=undefined\0" \
        "stdin=serial,usbkbd\0" \
-       "stdout=serial,vga\0" \
-       "stderr=serial,vga\0" \
+       "stdout=serial,vidconsole\0" \
+       "stderr=serial,vidconsole\0" \
        "panel=HDMI\0" \
        "autoload=no\0" \
        "uImage=uImage-cm-fx6\0" \
@@ -156,8 +132,6 @@
                        "echo WARNING: Could not determine dtb to use; fi; \0" \
        BOOTENV
 
-#define CONFIG_PREBOOT         "usb start;sf probe"
-
 #define BOOT_TARGET_DEVICES(func) \
        func(USB, usb, 0) \
        func(MMC, mmc, 2) \
@@ -168,9 +142,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS
 #endif
 
-/* SPI */
-#define CONFIG_SPI
-
 /* NAND */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_NAND_BASE           0x40000000
@@ -180,13 +151,18 @@
 /* APBH DMA is required for NAND support */
 #endif
 
+/* SPI Flash Configs */
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#undef CONFIG_SPI_FLASH_MTD
+#endif
+
 /* Ethernet */
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR         0
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
-#define CONFIG_PHY_ATHEROS
-#define CONFIG_MII
 #define CONFIG_ETHPRIME                        "FEC0"
 #define CONFIG_ARP_TIMEOUT             200UL
 #define CONFIG_NET_RETRY_COUNT         5
@@ -222,14 +198,11 @@
 
 /* misc */
 #define CONFIG_SYS_MALLOC_LEN                  (10 * 1024 * 1024)
-#define CONFIG_MISC_INIT_R
 
 /* SPL */
 #include "imx6_spl.h"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 
 /* Display */
-#define CONFIG_VIDEO_IPUV3
 #define CONFIG_IMX_HDMI
 
 #define CONFIG_SPLASH_SCREEN