#ifndef __CONFIG_H
#define __CONFIG_H
+#include <linux/stringify.h>
+
#include "mx6_common.h"
#undef CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_MXC_I2C3_SPEED 400000
-/* OCOTP Configs */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
/* MMC Configs */
-#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 3
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
/*
* SATA Configs
*/
#endif
/* Network */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 6
-#define CONFIG_IP_DEFRAG
-#define CONFIG_TFTP_BLOCKSIZE 4096
-#define CONFIG_TFTP_TSIZE
+#define PHY_ANEG_TIMEOUT 15000 /* PHY needs longer aneg time */
/* USB Configs */
/* Host */
#define CONFIG_USBD_HS
/* Framebuffer and LCD */
-#define CONFIG_VIDEO_IPUV3
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_ENV_OVERWRITE
/* Command definition */
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_FLASH
#undef CONFIG_IPADDR
#define CONFIG_IPADDR 192.168.10.2
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
func(USB, usb, 0) \
#include <config_distro_bootcmd.h>
#undef BOOTENV_RUN_NET_USB_START
#define BOOTENV_RUN_NET_USB_START ""
-#else
+#else /* CONFIG_SPL_BUILD */
#define BOOTENV
-#endif
+#endif /* CONFIG_SPL_BUILD */
#define DFU_ALT_EMMC_INFO \
"u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
"boot part 0 1;" \
"rootfs part 0 2;" \
- "uImage fat 0 1;" \
- "imx6q-colibri-eval-v3.dtb fat 0 1;" \
- "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
+ "zImage fat 0 1;" \
+ "imx6q-apalis-eval.dtb fat 0 1;" \
+ "imx6q-apalis-cam-eval.dtb fat 0 1"
+
+#define UBOOT_UPDATE \
+ "uboot_hwpart=1\0" \
+ "uboot_blk=8a\0" \
+ "uboot_spl_blk=2\0" \
+ "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+ "setexpr blkcnt ${blkcnt} / 0x200\0" \
+ "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+ "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
+ "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+ "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0"
#define EMMC_BOOTCMD \
- "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
- "rootwait\0" \
- "emmcboot=run setup; " \
+ "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
+ "ro,noatime rootfstype=ext4 rootwait\0" \
+ "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
"setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
"${vidargs}; echo Booting from internal eMMC chip...; " \
- "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} ${dtbparam}\0" \
- "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
+ "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \
+ "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
+ "bootz ${kernel_addr_r} ${dtbparam}\0" \
+ "emmcbootpart=1\0" \
+ "emmcdev=0\0" \
+ "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
+ "${fdt_addr_r} ${fdt_file} && " \
+ "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
+ "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
+ "emmcrootpart=2\0"
#define MEM_LAYOUT_ENV_SETTINGS \
"bootm_size=0x20000000\0" \
- "fdt_addr_r=0x12000000\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
+ "fdt_addr_r=0x12100000\0" \
"kernel_addr_r=0x11000000\0" \
"pxefile_addr_r=0x17100000\0" \
- "ramdisk_addr_r=0x12100000\0" \
+ "ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
#define NFS_BOOTCMD \
- "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
+ "nfsargs=ip=:::::eth0:on root=/dev/nfs ro\0" \
"nfsboot=run setup; " \
"setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
"${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
"run nfsdtbload; dhcp ${kernel_addr_r} " \
- "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
+ "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
"nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
"&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
-#define SD_BOOTCMD \
- "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
- "rootwait\0" \
- "sdboot=run setup; " \
- "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
- "${vidargs}; echo Booting from SD card; " \
- "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} ${dtbparam}\0" \
- "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
-
-#define USB_BOOTCMD \
- "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
- "rootwait\0" \
- "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
- "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
- "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
- "${boot_file} && run fdt_fixup && " \
- "bootm ${kernel_addr_r} ${dtbparam}\0" \
- "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
- "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
-
#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
#define FDT_FILE "imx6q-apalis-eval.dtb"
#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
- "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
- "run distro_bootcmd ; " \
+ "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
"usb start ; " \
- "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
- "boot_file=uImage\0" \
+ "setenv stdout serial,vidconsole; " \
+ "setenv stdin serial,usbkbd\0" \
+ "boot_file=zImage\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off vmalloc=400M\0" \
"dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
- SD_BOOTCMD \
+ UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"flash_eth.img && source ${loadaddr}\0" \
"load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
"source ${loadaddr}\0" \
"splashpos=m,m\0" \
+ "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
"vidargs=mxc_hdmi.only_cea=1 " \
"video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
"video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
#undef CONFIG_SYS_MAXARGS
#define CONFIG_SYS_MAXARGS 48
-#define CONFIG_SYS_MEMTEST_START 0x10000000
-#define CONFIG_SYS_MEMTEST_END 0x10010000
-#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Physical Memory Map */
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* environment organization */
-#define CONFIG_ENV_SIZE (8 * 1024)
#if defined(CONFIG_ENV_IS_IN_MMC)
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \
- CONFIG_TDX_CFG_BLOCK_OFFSET)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 1
#endif
-#define CONFIG_CMD_TIME
-
#endif /* __CONFIG_H */
projects / oweals / u-boot.git / blobdiff