configs: Migrate all of the existing USB symbols, except fastboot

[oweals/u-boot.git] / include / configs / advantech_dms-ba16.h

diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h
index 683f892be66bde20972fa15667c340d67ea80be2..d722f2e045b4b7d554a6aba174f7f7078e73af0e 100644 (file)
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@@ -10,13 +10,12 @@
 #define __ADVANTECH_DMSBA16_CONFIG_H
 
 #include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
+#include <asm/mach-imx/gpio.h>
 
 #define CONFIG_BOARD_NAME      "Advantech DMS-BA16"
-#define CONFIG_DEFAULT_FDT_FILE        "imx6q-dms-ba16.dtb"
 
 #define CONFIG_MXC_UART_BASE   UART4_BASE
-#define CONFIG_CONSOLE_DEV     "ttymxc3"
+#define CONSOLE_DEV    "ttymxc3"
 #define CONFIG_EXTRA_BOOTARGS  "panic=10"
 
 #define CONFIG_BOOT_DIR        ""
@@ -34,17 +33,12 @@
 #define CONFIG_REVISION_TAG
 #define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_GPIO
 #define CONFIG_MXC_UART
 
-#define CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP
 
 /* SATA Configs */
-#define CONFIG_CMD_SATA
 #define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     1
 #define CONFIG_DWC_AHSATA_PORT_ID      0
@@ -56,25 +50,16 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
-#define CONFIG_DOS_PARTITION
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 
 #define CONFIG_USBD_HS
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 
 /* Networking Configs */
 #define CONFIG_FEC_MXC
@@ -83,7 +68,6 @@
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_ETHPRIME                "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         4
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Serial Flash */
@@ -98,10 +82,6 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_BAUDRATE        115200
-
-/* Command definition */
-#define CONFIG_CMD_BMODE
 
 #define CONFIG_LOADADDR        0x12000000
 #define CONFIG_SYS_TEXT_BASE   0x17800000
@@ -114,7 +94,7 @@
        "fdt_addr=0x18000000\0" \
        "boot_fdt=yes\0" \
        "ip_dyn=yes\0" \
-       "console=" CONFIG_CONSOLE_DEV "\0" \
+       "console=" CONSOLE_DEV "\0" \
        "fdt_high=0xffffffff\0"   \
        "initrd_high=0xffffffff\0" \
        "sddev=0\0" \
@@ -239,7 +219,6 @@
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE               (128 * 1024)
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
@@ -255,9 +234,7 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                 (8 * 1024)
 #define CONFIG_ENV_OFFSET               (768 * 1024)
 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
@@ -272,11 +249,8 @@
 #define CONFIG_SYS_FSL_USDHC_NUM        3
 
 /* Framebuffer */
+#ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -286,14 +260,12 @@
 #define CONFIG_IPUV3_CLK                260000000
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
+#endif
 
 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK         66000000
 
-#undef CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)