sun50i: h5: Add initial NanoPi NEO2 support

[oweals/u-boot.git] / include / configs / a3m071.h

diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 8f17dd18c7ac38cf7edc59e320fa6af9bc95dcca..82b9ff471d6b52698360e52ebc7d50ffefa6de63 100644 (file)
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -14,7 +14,6 @@
 
 #define CONFIG_MPC5200
 #define CONFIG_A3M071                  /* A3M071 board */
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define        CONFIG_SYS_TEXT_BASE    0x01000000      /* boot low for 32 MiB boards */
 
@@ -37,14 +36,12 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE     1           /* console is on PSC1 */
-#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE              \
        { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_BSP
 #define CONFIG_CMD_REGINFO
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_SERVERIP
@@ -54,7 +51,6 @@
 #define CONFIG_BOOTP_SERVERIP
 #define CONFIG_NET_RETRY_COUNT 3
 #define CONFIG_NETCONSOLE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS  /* needed for UBI */
 #define CONFIG_FLASH_CFI_MTD
@@ -75,7 +71,6 @@
 #define CONFIG_LZO                     /* needed for UBI */
 #define CONFIG_RBTREE                  /* needed for UBI */
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 
 /*
@@ -249,8 +244,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x00100000
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup*/
-
 /*
  * Various low-level settings
  */
@@ -332,8 +325,8 @@
 
 #undef CONFIG_BOOTARGS
 
-#define CONFIG_SYS_OS_BASE     0xfc200000
 #define CONFIG_SYS_FDT_BASE    0xfc1e0000
+#define CONFIG_SYS_FDT_SIZE    (16<<10)
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
@@ -395,19 +388,12 @@
  * SPL related defines
  */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NOR_SUPPORT
 #define CONFIG_SPL_TEXT_BASE   0xfc000000
-#define CONFIG_SPL_LIBCOMMON_SUPPORT   /* image.c */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT  /* string.c */
-#define CONFIG_SPL_SERIAL_SUPPORT
 
 /* Place BSS for SPL near end of SDRAM */
 #define CONFIG_SPL_BSS_START_ADDR      ((128 - 1) << 20)
 #define CONFIG_SPL_BSS_MAX_SIZE                (64 << 10)
 
-#define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_ENV_SUPPORT
 /* Place patched DT blob (fdt) at this address */
 #define CONFIG_SYS_SPL_ARGS_ADDR       0x01800000