flash: complete CONFIG_SYS_NO_FLASH move with renaming

[oweals/u-boot.git] / include / configs / T4240QDS.h

diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
index 4edb3cb91f35ddfaa08d5912259e4e402104693c..3ef647e2037932abcf9099fafb2e8be86fc56349 100644 (file)
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@@ -10,9 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_T4240QDS
-#define CONFIG_PHYS_64BIT
-
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE4
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
@@ -21,21 +18,12 @@
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_rcw.cfg
 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD)
 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
 #else
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
@@ -44,18 +32,17 @@
 #define BOOT_PAGE_OFFSET               0x27000
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_nand_rcw.cfg
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SDCARD
 #define        CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      0x00200000
@@ -65,6 +52,7 @@
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_sd_rcw.cfg
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -72,7 +60,6 @@
 #define CONFIG_SPL_SKIP_RELOCATE
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #endif
@@ -84,7 +71,6 @@
 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
                (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #define CONFIG_SRIO_PCIE_BOOT_MASTER
@@ -92,7 +78,7 @@
 
 #include "t4qds.h"
 
-#ifdef CONFIG_SYS_NO_FLASH
+#ifndef CONFIG_MTD_NOR_FLASH
 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
 #define CONFIG_ENV_IS_NOWHERE
 #endif
@@ -343,7 +329,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_RAMBOOT
 #endif
 
-
 /* I2C */
 #define CONFIG_SYS_FSL_I2C_SPEED       100000  /* I2C speed */
 #define CONFIG_SYS_FSL_I2C2_SPEED      100000  /* I2C2 speed */
@@ -401,13 +386,9 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH_SST
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
-
 /* Qman/Bman */
 #ifndef CONFIG_NOBQFMAN
 #define CONFIG_SYS_DPAA_QBMAN          /* Support Q/Bman */
@@ -495,7 +476,6 @@ unsigned long get_board_ddr_clk(void);
 #define FM2_10GEC2_PHY_ADDR    0x3
 #endif
 
-
 /* SATA */
 #ifdef CONFIG_FSL_SATA_V2
 #define CONFIG_LIBATA
@@ -511,8 +491,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -530,25 +508,15 @@ unsigned long get_board_ddr_clk(void);
 /*
 * USB
 */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #define CONFIG_HAS_FSL_DR_USB
 
-#define CONFIG_MMC
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_ESDHC_DETECT_QUIRK \
        (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
@@ -557,7 +525,6 @@ unsigned long get_board_ddr_clk(void);
        (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
 #endif
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define __USB_PHY_TYPE utmi
 
@@ -567,7 +534,7 @@ unsigned long get_board_ddr_clk(void);
  * interleaving. It can be cacheline, page, bank, superbank.
  * See doc/README.fsl-ddr for details.
  */
-#ifdef CONFIG_PPC_T4240
+#ifdef CONFIG_ARCH_T4240
 #define CTRL_INTLV_PREFERED 3way_4KB
 #else
 #define CTRL_INTLV_PREFERED cacheline
@@ -590,7 +557,7 @@ unsigned long get_board_ddr_clk(void);
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=t4240qds/t4240qds.dtb\0"                               \
        "bdev=sda3\0"
 
@@ -646,8 +613,4 @@ unsigned long get_board_ddr_clk(void);
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif /* __CONFIG_H */